JBL QUANTUM910P Console Wireless Headphones Owner’s Manual

JBL QUANTUM910P Console Wireless Headphones

Product Information

The JBL Quantum 910P Console Wireless is a high-quality headset designed for gaming. It features Active Noise Cancelling (ANC) technology to provide an immersive gaming experience by suppressing outside noise. The headset also has TalkThru mode, which allows for natural conversations without removing the headset. The package includes the headset, a calibration microphone, a USB charging cable, a 3.5 mm audio cable, a 2.4GHz USB wireless dongle, a quick start guide, a warranty card, a safety sheet, and a windshield foam for the boom microphone.

Controls

The headset has the following controls:

• Detachable windshield foam
• 3.5 mm audio jack
• USB-C port
• Voice focus boom microphone

The 2.4GHz USB wireless dongle has its own controls.

Product Usage Instructions

Charging Your Headset:
Before using the headset, fully charge it using the supplied USB-A to USB-C charging cable. The charging time is approximately 3.5 hours.

Wearing Your Headset

1. Put the side marked L onto your left ear and the side marked R onto your right ear.
2. Adjust the earpads and headband for a comfortable fit.
3. Adjust the microphone as necessary.

Power On:
To power on the headset, follow the first-time setup instructions for PC users.

First-Time Setup (For PC Only):

1. Connect the headset to your PC via the 2.4GHz USB wireless connection.
2. Go to Sound Settings -> Sound Control Panel on your PC.
3. Under Playback, select “JBL QUANTUM910P CONSOLE WIRELESS GAME” as the default device.
4. Under Playback, select “JBL QUANTUM910P CONSOLE WIRELESS CHAT” as the default communication device.
5. Under Recording, select “JBL QUANTUM910P CONSOLE WIRELESS CHAT” as the default device.
6. In your chat application, select “JBL QUANTUM910P CONSOLE WIRELESS CHAT” as the default audio device.
7. Follow the onscreen instructions to personalize your sound settings.

Using Your Headset:
If you want to use the headset with a 3.5 mm audio connection:

1. Connect the black connector to your headset.
2. Connect the orange connector to the 3.5 mm headphone jack on your PC, Mac, mobile, or gaming console device.

The headset has basic operation controls:

• Volume dial on the 3.5 mm audio cable: Adjusts the master volume.
• Slider on the 3.5 mm audio cable: Slide to mute or unmute the microphone.

Introduction

Congratulations on your purchase! This manual includes information on the JBL QUANTUM910P CONSOLE WIRELESS gaming headset. We encourage you to take a few minutes to read this manual, which describes the product and includes step-by- step instructions to help you to set up and get started. Read and understand all the safety instructions before using your product.
If you have any questions about this product or its operation, please contact your retailer or customer service, or visit us at www.JBLQuantum.com

What’s in the box

1. JBL QUANTUM910P CONSOLE WIRELESS headset
2. Calibration microphone
3. USB charging cable (USB-A to USB-C)
4. 3.5 mm audio cable
5. 2.4GHz USB wireless dongle (USB-C)
6. QSG, warranty card and safety sheet
7. Windshield foam for boom microphone
8. USB-C to USB-A converter

PRODUCT OVERVIEW

Controls on headset

1. ANC* / TalkThru** LED

   • Lights up when the ANC feature is enabled.
   • Flashes quickly when the TalkThru feature is enabled.

2. button

   • Press briefly to turn ANC on or off.
   • Hold for 2 seconds to turn TalkThru on or off.

3. dial
   Balances the chat volume in relation to the game audio volume.

4. Volume +/- dial
   Adjusts headset volume.

5. Detachable windshield foam

6. Mic mute / unmute LED
   Lights up when the microphone is muted.

7. Button

   • Press to mute or unmute the microphone.
   • Hold for 5 seconds to turn the RGB light on or off.

8. Charging LED
   Indicates the charging and battery status.

9. 3.5 mm audio jack

10. USB-C port

11. Voice focus boom microphone
    Flip up to mute, or flip down to unmute the microphone.

12. Button

    • Press to switch between off (default), spatial sound, and spatial sound + head tracking.
    • Hold for 2 seconds to start re-centering for head tracking.

13. slider

    • Slide upwards to power on and enter 2.4GHz pairing mode, or slide downwards to power off the headset.
    • Slide upwards and hold for 2 seconds to enter Bluetooth pairing mode.

14. Status LED (Power / 2.4GHz / Bluetooth)

15. RGB Lighting Zones

16. Flat-fold ear cup
    ANC (Active Noise Cancelling): Experience total immersion while gaming by suppressing the outside noise.
    TalkThru: In TalkThru mode, you can hold natural conversations without removing your headset.

Controls on 2.4GHz USB wireless dongle

1. 01 CONNECT button
   Hold for 5 seconds to enter 2.4GHz wireless pairing mode.

2. 02 LED
   Indicates the status of 2.4GHz wireless connection.

Controls on 3.5 mm audio cable

1. Volume dial
   • Adjusts headset volume in 3.5 mm audio connection.

2. slider
   • Slide to mute or unmute the microphone in 3.5 mm audio connection.

Getting started

Charging your headset

Before use, fully charge your headset through the supplied USB-A to USB-C charging cable.

TIPS:

• It takes approximately 3.5 hours to fully charge the headset.
• You can also charge your headset through a USB-C to USB-C charging cable (not supplied).

Wearing your headset

1. Put the side marked L onto your left ear and the side marked R onto your right ear.
2. Adjust the earpads and headband for a comfortable fit.
3. Adjust the microphone as necessary.

Power on

• Slide the power switch upwards to power on the headset.
  The status LED glows solid white upon powering on.

• Slide downwards to power off.

First-time setup (for PC only)
Download from jblquantum.com/engine to gain full access to features on your JBL Quantum headset – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works.

Software requirements
Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation

TIPS:

• JBL QuantumSPHERE 360 available on Windows only. Software installation required.
• JBL QuantumSPATIAL 360 available on PlayStation (PS4/PS5) and Nintendo Switch.

1. Connect the headset to your PC via 2.4GHz USB wireless connection (See “With 2.4GHz wireless connection”).
2. Go to “Sound Settings” -> “Sound Control Panel”.
3. Under “Playback” highlight “JBL QUANTUM910P CONSOLE WIRELESS GAME” and select “Set Default” -> “Default Device”.
4. Highlight “JBL QUANTUM910P CONSOLE WIRELESS CHAT“ and select “Set Default” -> “Default Communication Device”.
5. Under “Recording” highlight “JBL QUANTUM910P CONSOLE WIRELESS CHAT” and select “Set Default” -> “Default Device”.
6. In your chat application select “JBL QUANTUM910P CONSOLE WIRELESS CHAT” as the default audio device.
7. Follow the onscreen instructions to personalize your sound settings.

Using your headset

With 3.5 mm audio connection

1. Connect the black connector to your headset.
2. Connect the orange connector to the 3.5 mm headphone jack on your PC, Mac, mobile or gaming console device.

Basic operation

NOTE: The mic mute / unmute LED, button, dial and RGB Lighting Zones on the headset do not work in 3.5 mm audio connection.

With 2.4GHz wireless connection

1. Plug the 2.4GHz USB wireless dongle into a USB-C port on your PC, Mac, laptop, PS5 console, or Nintendo Switch™ controller.
   With the supplied USB-C to USB-A converter, you can connect the dongle to a USB-A port on your PC, Mac, desktop, PS4/PS5 console, or Nintendo Switch™ console.

2. Power on the headset. It will pair and connect with the dongle automatically.

Basic operation

button

| Press to mute or unmute the microphone.

Hold for 5 seconds to turn on or off the RGB light.

button

| Press briefly to turn ANC on or off.

Hold for 2 seconds to turn TalkThru on or off.

To pair manually

1. On the headset, slide the power switch upwards to power on and enter 2.4GHz pairing mode.
2. On the 2.4GHz USB wireless dongle, hold CONNECT for 5 seconds until the LED flashes white quickly.
   Both LEDs on the headset and dongle turn solid white after successful connection.

TIPS:

• The headset turns off automatically after 10 minutes of inactivity.
• The LED on the dongle enters connecting mode (flashing slowly) after disconnection from the headset.
• Compatibility with all USB ports is not guaranteed.

With Bluetooth (secondary connection)

With this function, you can connect your mobile phone to the headset while playing games, without worrying about missing important calls.

1. On the headset, push the slider upwards and hold for 2 seconds to enter Bluetooth pairing mode.
   The status LED flashes quickly (pairing).

2. Enable Bluetooth on your mobile phone and choose “JBL Quantum910P” from “Devices”.
   The status LED flashes slowly (connecting), and then turns solid blue (connected).

NOTE:
Next time when you power on the headset, push the slider upwards to reconnect the headset to your mobile phone.

Control calls

When there is an incoming call:

• Press once to answer.
• Press twice to reject.

During a call:
Press once to hang up.

TIP: Use volume controls on your Bluetooth connected device to adjust volume.

Product Specifications

• Model: QUANTUM910P CONSOLE WIRELESS
• Driver size: 50 mm Dynamic drivers
• Frequency response (Passive): 20 Hz – 40 kHz
• Frequency response (Active): 20 Hz – 20 kHz
• Microphone frequency response: 100 Hz – 8 kHz
• Max input power: 30 mW
• Sensitivity: 111 dB SPL / 1 mW
• Maximum SPL: 93 dB
• Microphone sensitivity: -38 dBV / Pa @1 kHz
• Impedance: 32 ohm
• 2.4GHz Wireless transmitter power: <13 dBm
• 2.4GHz Wireless modulation: GFSK, π/4 DQPSK
• 2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
• Bluetooth transmitted power: <13 dBm
• Bluetooth transmitted modulation: GFSK, π/4 DQPSK
• Bluetooth frequency: 2400 MHz – 2483.5 MHz
• Bluetooth profile version: A2DP v1.3, HFP v1.8
• Bluetooth version: BT Core v5.2
• Battery type: Li-ion battery (3.7 V / 1300 mAh)
• Power supply: 5 V 2 A
• Charging time: 3.5 hrs
• Music play time with BT+2.4GHz on and ANC+RGB lighting off: Up to 34 hrs
• Talk time with BT+2.4GHz on and ANC+RGB lighting off: Up to 38 hrs
• Music play time with only 2.4GHz on and ANC+RGB lighting off: Up to 39 hrs
• Talk time with only 2.4GHz on and ANC+RGB lighting off: Up to 44 hrs
• Music play time with only BT on and ANC+RGB lighting off: Up to 45 hrs
• Talk time with only BT on and ANC+RGB lighting off: Up to 47 hrs
• Microphone pickup pattern: Unidirectional
• Weight: 420 g

NOTE: Technical specifications are subject to change without prior notice.

Troubleshooting

If you have problems using this product, check the following points before you request service.

No power

• The headset turns off automatically after 10 minutes of inactivity. Power on the headset again.
• Recharge the headset (see “Charging your headset”).

2.4GHz pairing failed between headset and 2.4GHz USB wireless dongle

• Move the headset closer to the dongle. If the issue remains, pair the headset with the dongle again manually (see “To pair manually”).

Bluetooth pairing failed

• Make sure you have enabled Bluetooth feature on the device to be connected with the headset.
• Move the device closer to the headset.
• The headset is connected to another device through Bluetooth. Disconnect the other device, then repeat the pairing procedures. (see “With Bluetooth (secondary connection)”).

No sound or poor sound

• Make sure you have chosen JBL QUANTUM910P CONSOLE WIRELESS GAME as the default device in the game sound settings of your PC, Mac or gaming console device.
• Adjust volume on your PC, Mac or gaming console device.
• Check game chat balance on PC if you are only playing game or chat audio.
• Check that ANC is enabled while TalkThru is disabled.
• You may experience obvious sound quality degradation when using the headset near a USB 3.0 enabled device. This is not a malfunction. Use an extension USB dock instead to keep the dongle as far from the USB 3.0 port as possible.

In 2.4GHz wireless connection:

• Make sure the headset and 2.4GHz wireless dongle are paired and connected successfully.
• The USB ports on some gaming console devices may be incompatible with JBL QUANTUM910P CONSOLE WIRELESS. This is not a malfunction.

In 3.5 mm audio connection:
Make sure the 3.5 mm audio cable is connected securely.

In Bluetooth connection:

• The volume control on the headset does not work for the Bluetooth connected device. This is not a malfunction.
• Keep away from sources of radio interference such as microwaves or wireless routers.

My voice cannot be heard by my teammates

• • Make sure you have chosen JBL QUANTUM910P CONSOLE WIRELESS CHAT as the default device in the chat sound settings of your PC, Mac or gaming console device.
  • Make sure the microphone is not muted.

I can’t hear myself when I’m talking

• Enable sidetone via JBL QuantumENGINE to hear yourself clearly over game audio. ANC/TalkThru will be disabled when sidetone is enabled.

License

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine

Software requirements
Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation
Note: Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE

JBL QuantumSPHERE 360
available on Windows only. Software installation required.

JBL QuantumSPATIAL 360
Available on PlayStation (PS4/PS5) and Nintendo Switch

WHAT’S IN THE BOX

Requirements

Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION

System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC

3.5 mm Audio Cable

2.4GHz Wireless

| Stereo| Stereo| Stereo

Not Compatible

| Stereo| Stereo

Not Compatible

| Stereo
Bluetooth| Stereo| Not Compatible| Not Compatible| Stereo| Stereo| Stereo

OVERVIEW

1. ANC / TALKTHRU LED
2. ANC / TALKTHRU button
3. Game audio-chat balance dial
4. Volume Control
5. Detachable Windshield foam
6. Notification LED for mic mute / unmute
7. Microphone Mute / unMute
8. CHARGING LED
9. 3.5 mm Audio Jack
10. USB-C port
11. Voice Focus Boom Microphone
12. SPATIAL SOUND / head tracking control
13. Power on / off and Bluetooth pairing slider
14. POWER / 2.4GHz / Bluetooth LED
15. RGB Lighting Zones
16. Flat-fold ear cup
17. 2.4GHz PAIRING BUTTON
18. Volume Control
19. MIC MUTE BUTTON

Calibration microphone

POWER ON & CONNECT

Bluetooth

SETUP

BUTTON COMMAND

First time setup

• Connect the headset to your PC via 2.4GHz USB wireless connection.

• Go to “Sound Settings” -> “Sound Control Panel”.

• Under “Playback” highlight “JBL Quantum910P Console
  Wireless GAME” and select “Set Default” -> “Default Device”. 9d Highlight “JBL Quantum910P Console Wireless CHAT” and select “Set Default” -> “Default Communication Device”.

• Under “Recording” highlight “JBL Quantum910P Console
  Wireless CHAT” and select “Set Default” -> “Default Device”.

• In your chat application select “JBL Quantum910P Console
  Wireless CHAT” as the default audio device.

• Follow the onscreen instructions to personalize your sound settings.
  If you have not installed JBL QuantumEngine, ensure to complete this step before enabling JBL QuantumSPATIAL 360.

MICROPHONE

CHARGING

LED BEHAVIOURS

TECH SPEC

• Model: QUANTUM910P CONSOLE WIRELESS
• Driver size: 50 mm Dynamic drivers
• Frequency response (Passive): 20 Hz – 40 kHz
• Frequency response (Active): 20 Hz – 20 kHz
• Microphone frequency response: 100 Hz – 8 kHz
• Max input power: 30 mW
• Sensitivity: 111 dB SPL / 1 mW
• Maximum SPL: 93 dB
• Microphone sensitivity: -38 dBV / Pa @1 kHz
• Impedance: 32 ohm
• 2.4GHz Wireless transmitter power: <13 dBm
• 2.4GHz Wireless modulation: GFSK, π/4 DQPSK
• 2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
• Bluetooth transmitted power: <13 dBm
• Bluetooth transmitted modulation: GFSK, π/4 DQPSK
• Bluetooth frequency: 2400 MHz – 2483.5 MHz
• Bluetooth profile version: A2DP v1.3, HFP v1.8
• Bluetooth version: BT Core v5.2
• Battery type: Li-ion battery (3.7 V / 1300 mAh)
• Power supply: 5 V 2 A
• Charging time: 3.5 hrs
• Music play time with BT+2.4GHz on and ANC+RGB lighting off: Up to 34 hrs
• Talk time with BT+2.4GHz on and ANC+RGB lighting off: Up to 38 hrs
• Music play time with only 2.4GHz on and ANC+RGB lighting off: Up to 39 hrs
• Talk time with only 2.4GHz on and ANC+RGB lighting off: Up to 44 hrs
• Music play time with only BT on and ANC+RGB lighting off: Up to 45 hrs
• Talk time with only BT on and ANC+RGB lighting off: Up to 47 hrs
• Microphone pickup pattern: Unidirectional
• Weight: 420 g

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ910WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.106 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ910WLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.548 W/Kg.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ910WL

Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions ma

Warning: DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Product specifications and app screens are subject to change without notice.
HP_JBL_Quantum 910P_QSG_Global_SOP_V10

Sound is survival.
Are those voices behind you? Footsteps to your left? Hearing your surroundings is crucial, but truly immersive sound that gives you the edge used to require a wired headset. Not anymore. The JBL Quantum 910P Console Wireless headset delivers precise, dual spatial, hi-res audio with integrated head tracking to keep you in the center of the action. Ideal for Playstation, also works wirelessly with Nintendo Switch and PC and wired with Xbox. The low latency wireless connection means zero lag when talking to the squad, and Active Noise Cancelling lets you play without distractions even in the noisiest places. The Quantum 910P Console Wireless features up to 39 hours of battery, but you can even charge while you play during marathon sessions. And with unparalleled ergonomic comfort you’re gonna have marathon sessions. Cut the cord and game your way.

Features

• Gain the competitive advantage with JBL QuantumSPATIAL 360™ on your Playstation
• Be at the center of the game with Hi-Res certified JBL QuantumSOUND Signature
• Low latency wireless system
• Active Noise Cancelling technology for gaming
• Play and charge at the same time
• JBL Dual Source
• Flip-up-to-mute boom mic with echo and noise suppression
• Durable, Comfortable Design
• Optimized for Playstation, compatible with multiple platforms

Quantum 910P Console Wireless
Wireless over-ear console gaming headset with head tracking-enhanced, Active Noise Cancelling and Bluetooth

Features and Benefits

Gain the competitive advantage with JBL QuantumSPATIAL 360™ on your Playstation
Enjoy JBL QuantumSPATIAL 360™ on Playstation and Nintendo Switch, through the the USB-C dongle/adaptor without passing through the JBL QuantumENGINE. The integrated head-tracking technology provides you with the extra accuracy and acoustic presence you need to win the game. JBL QuantumSPHERE 360™, powered by JBL QuantumENGINE, available through the USB-C dongle/adaptor on Windows 10/11, gives you professional-level 3D-audio positioning on your PC.

Be at the center of the game with Hi-Res certified JBL QuantumSOUND Signature
From the tiniest footsteps to the loudest explosion, JBL QuantumSOUND Signature makes every scene epic and every gamer more competitive.
The Hi-Res certified 50mm neodymium drivers deliver an immersive sound curve tuned by JBL audiologists and specifically designed for gaming. Our signature audio creates the most realistic soundscape for a competitive advantage in any battle.

Low latency wireless system
The difference between staying in the game and starting over can be
split-second. That’s why the JBL Quantum 910P Console Wireless 2.4 GHz connection means you’ll always stay connected with zero lag.
Active Noise Cancelling technology for gaming
Tuned for gaming environments, the JBL Quantum 910P Console Wireless’ Active Noise Cancelling eliminates unwanted sounds around you so you can stay fully engaged in your mission without distractions.

Play and charge at the same time
Game all day and night with up to 39 hours of battery life (with dongle, up to 45H with BT) that charges as you play with the USB charging cable, included. Unlike some teammates out there, JBL Quantum 910P Console Wireless never quits—and never lets you down. The USB-C dongle comes with an USB-C to USB-A connector.

JBL Dual Source
The Quantum 910P Console Wireless allows for the communication to come simultaneously from two sources: while the dongle keeps you connected to the game, the BT 5.2 allows you to talk to your friends or listen to music.
Flip-up-to-mute boom mic with echo and noise suppression
Echo and noise suppression technology ensures that your team hears you with razor-sharp clarity. And when you need to concentrate, just flip up the unidirectional mic for instant radio silence.

Durable, Comfortable Design
The lightweight, durable headband and premium leather-wrapped memory foam ear cushions are designed for total comfort, no matter how long
you play.

Optimized for Playstation, compatible with multiple platforms
The JBL Quantum 910P Console Wireless headset is compatible via 2.4GHz wireless connection with Playstation™ (PS5 and PS4), PC and Nintendo Switch™, Mac via Bluetooth 5.2 with Bluetooth compatible devices and via 3.5mm audio jack, with PC, PlayStation™, Xbox™, Nintendo Switch™, Mobile, Mac and VR. The features powered by JBL QuantumENGINE (JBL QuantumSURROUND, RGB, EQ, Microphone settings etc.) are only available on PC. Check the connectivity guide for compatibility.

Technical Specifications

• Driver size: 50 mm Dynamic drivers
• Frequency response (Passive): 20 Hz – 40 kHz
• Frequency response (Active): 20 Hz – 20 kHz
• Microphone frequency response: 100 Hz – 8 kHz
• Max input power 30 mW
• Sensitivity: 113 dB SPL @1 kHz / 1 mW
• Maximum SPL: 93 dB
• Microphone sensitivity: -38 dBV / Pa@1 kHz
• Impedance: 32 ohm
• 2.4GHz Wireless transmitter power: <13 dBm 2.4GHz
• Wireless modulation: GFSK, π/4 DQPSK
• 2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
• Bluetooth transmitted power: <13 dBm
• Bluetooth transmitted modulation: GFSK, π/4 DQPSK
• Bluetooth frequency: 2402 MHz – 2483.5 MHz
• Bluetooth profile version: A2DP 1.3, HFP 1.8
• Bluetooth version: V5.2
• Battery type: Li-ion battery (3.7 V / 1300 mAh)
• Power supply: 5V 2 A
• Charging time: 3.5 hrs
• Music play time with BT +2.4HGhz on and ANC
• +RGB lighting off: Up to 34 hrs
• Talk time with BT+2.4Ghz on and ANC+RGB lighting off: Up to 38 hrs
• Music play time with only 2.4Ghz on and ANC+RGB lighting off : Up to 39 hrs
• Talk time with only 2.4Ghz on and ANC+RGB lighting off : Up to 44 hrs
• Music play time with only BT on and ANC+RGB lighting off : Up to 45 hrs
• Talk time with only BT on and ANC+RGB lighting off : Up to 47 hrs
• Microphone pickup pattern: Unidirectional Weight: 420 g
• Ear Cup Depth (cm) – 2.8cm
• Ear Cup Depth (in) –  1.1 in
• Ear Cup External Height (cm) – 10.15 cm
• Ear Cup External Height (in) – 3.996 in
• Ear Cup External Width (cm) -9.13 cm
• Ear Cup External Width (in) – 3.594 in
• Ear Cup Internal Height (cm) – 6.0 cm
• Ear Cup Internal Height (in) – 2.362 in
• Ear Cup Internal Width (cm) – 4.95 cm
• Ear Cup Internal Width (in) – 1.949 in

What’s in the Box

• JBL Quantum 910P Console Wireless headset
• Calibration Microphone
• USB Charging Cable
• 3.5 mm audio cable
• USB wireless dongle
• USB-C to USB-A Converter
• Windshield foam for microphone
• QSG | Warranty card | Safety Sheet

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA

© 2022 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.

References

• JBL Quantum Support
• JBL Quantum Support
• Félicitations ! Votre domaine a bien été créé chez OVHcloud !
• jbl.com
• Official JBL Store - Speakers, Headphones, and More!
• JBL Quantum
• YourWebHosting
• jljl.com | Venture
• wwwJbl.com/warrantyandsaletyt
• wwwJbl.com/wWntyanclsafetybooks

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>