SOMOGYI ELEKTRONIC URC 2000AC series Universal Remote Controller For Air Conditioners Instruction Manual

: June 12, 2024
: SOMOGYI ELEKTRONIC

Table of Contents

URC 2000AC series Universal Remote Controller For Air Conditioners
POWER SUPPLY, INSTALLATION
SETTING OPERATING CODE
CLOCK SETTING
SCHEDULED ON- OFF SWITCH
OPERATION OF SLEEP MODE
USING „SMART” COOL AND HEAT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

URC 2000AC series
instruction manual

URC 2000AC series Universal Remote Controller For Air Conditioners

Brand	Model Code	Brand	Model Code
ALPIN	0252,0253,0764, 1277, 1789	LITTLE DUCK	0015-0020,0530.1043
AUCMA	0288-0296,0462,1313,1998	LOREN-SEBO	0255,0471,0472,0767
AUX	0297-0300,0451,0474,0475,0812.1987	MACOUAY	0234-0237,0465,0746,1773
BAHSHEN	0,264.12881800	MICOM	041,509,271,951
BOERKA	0383,0434,0436,0437.1407.1972	MIDEA	0260-0265.0526.1289.1976
CARRI ER	0203-0209,0456-0458,0482-0486,0563-0565	MI TSUBISHI

UNIVERSAL REMOTE CONTROLLER
FOR AIR CONDITIONERS

Before using this product, please read the following instructions carefully and retain it for further reference. The original instruction manual has written in Hungarian language.
2000 operating codes, suitable for more than 10000 types

Applicable for almost all of air conditioners
It will expand the functions of yours with new and useful ones
Always displays the room temperature
Current time is readable constantly
Scheduled programs; on and off switch
Intelligent quick cooling and quick heat functions
SMART sleep mode with delayed temperature control
Automatic operating code searching
Manual setting by brands
Clear, readable, large display
High-quality, uniform blue LED backlight
Ergonomic design
Accessory: wall console
Power supply: 2xAAA (1,5V) battery, not included

POWER SUPPLY, INSTALLATION

Remove the cover of the battery compartment, and insert 2 pcs AAA size (1,5V) alkaline batteries following the marked polarity. If the display dims or the range is reduced, during operation, replace the batteries with new ones. After battery replacement, it is not necessary to set the operating code again.

The battery should be replaced by adults only!
Do not use different kinds of batteries and/or used and new batteries together!
Immediately remove batteries if they are discharged, or you are not planning to use the unit for longer period!
If there is some liquid ﬂown out, then take a protective glove and clean the battery holder with a dry cloth!
Do not open, burn and short circuit the batteries!
It is forbidden to charge the batteries which are not rechargeable! Risk of explosion!
Do not use accumulators instead of batteries, because their voltage and efﬁciency is signiﬁcantly lower!
In cold circumstances, the power of the batteries weakens, frequent battery replacement may needed!

SETTING OPERATING CODE

Before you start operation of your unit, the unique operating code of your air conditioner has to be set on the remote controller. At the moment this type of universal remote controller knows the most operating codes (2000) which is available at the stores. Due to this ability, it can control almost all types, but due to improvements of the manufacturers, 100% compatibility is not guaranteed. There are two ways of setting suffi cient operating code:
Manual setting: search the brand name of your device in the table included in the packing. Codes belonging to it operates not only one device but whole families. Choose the code which operates your air conditioner. E.g.: in case of CARRIER device, choose 0203 code fi rst, and if it doesn’t work, try the next one (0204), then try the further ones if needed.
Entering code: press SELECT button. At the place of the clock, the CODE label will be ﬂ ashing. Enter the 4-digit code directly with the number keys. After entering the fourth digit, the data will be recorded automatically. After that, try to operate your air conditioner with the on/off switch. If it reacts, try the other functions as well. If functions, used earlier don’t work, try other code numbers. Since the remote controller includes variety of 2000 codes, the maximum number you can specify can be 1999.
If you can’t fi nd the brand name, or none of the codes belonging to the brand name operates the air conditioner, doesn’t mean that the remote controller can’t be used together with it. Different manufacturers often apply same code system, so there are many air conditioners operated by the remote controller, which can’t be found in the list. For checking that, starting the automatic code search is recommended.

Automatic code searching: Place the remote controller to have the INFRA LED situated on its front directed to the receiver window of the air conditioner. Keep pressed the SELECT button for 5 seconds. Then the remote controller will step the codes one by one, and each of them will send a signal to the air conditioner. If it emits a sound, it has found the operating code. After that, press the POWER (on/off) button and operating code will be fi xed. If there are functions, which are not working, then try other code numbers. With ENTER button you can check the actual fi xed code at any time. Stepping and trying each code can take even 40 minutes. In the meantime, you can follow the process by indicating codes 1- 1999.

CLOCK SETTING

Press CLOCK button, then start to set current time within 8 seconds with TIME +/- buttons. After the setting has finished, press CLOCK button again.

SCHEDULED ON- OFF SWITCH

Press TIMER ON button, then start to set desired switch-on time within 8 seconds with TIME +/- buttons. After the setting has finished, wait till the ﬂashing stops. Setting of switch-off time can be done with TIMER OFF and TIME +/- buttons. In order to operate the function, leave the remote controller in such position, where it is able to control the air conditioner. Timing can be cancelled with double press of TIMER ON or TIMER OFF buttons. If you want to check the set time, press TIMER ON or TIMER OFF buttons, and the set
time will be visible for 5 seconds.

OPERATION OF SLEEP MODE

In summer, when the air conditioner is working in cooling mode, press SLEEP button, and a moon/star symbol will appear on the display. The adjusted temperature will increase by 1ºC increment in the fi rst 2 hours, and the unit will switch off after 8 hours. In order to operate the function, leave the remote controller in such position, where it is able to control the air conditioner. (In case of heating mode, the temperature will decrease automatically.)

USING „SMART” COOL AND HEAT

In summer, when the air conditioner is working in cooling mode, press
i. COOL button and the air conditioner will start cooling immediately. In winter,
i. HEAT button will switch immediate heating. In these cases, the temperature remains in a comfort range and the ventilator as well as the blades will work automatically. It is available to adjust temperature with TEMP +/- buttons.
This function makes an especially simple use available for children and elderly people.

WARNINGS

Please read this instruction manual carefully before use and retain it for further reference.
Protect it from dust, humidity, liquids, wet, frost, shocks and direct heat radiation and sunshine!
Do not expose the device to splashing water and do not place objects, filled with liquids on it (e.g. glass)!
Do not place opened source of ﬂame (e.g.: lighting candle) on the device!
For private use only!
Due to continuous improvements the design and specifications may change without any prior notice.
We don’t take the responsibility for printing errors and we apologize if there’s any.

Waste equipment must be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

URC 2000AC series

Producer:
SOMOGYI ELEKTRONIC®
H – 9027
Győr, Gesztenyefa út 3. • www.somogyi.hu

Distribútor: SOMOGYI ELEKTRONIC SLOVENSKO s. r. o.
Ul. gen. Klapku 77, 945 01 Komárno, SK
Tel.: +421/0/35 7902400
www.somogyi.sk