iO HVAC CONTROLS RBD-XX RBD Register Boot Damper User Manual
- June 12, 2024
- iO HVAC Controls
Table of Contents
RBD-XX Register and boot not included.
Just slide damper in and screw down
the mounting bracket.
REGISTER BOOT DAMPER
The RBD Register Boot Damper is a retrofit zone damper designed to be installed in a register boot without having to take the duct work apart. RBD Register Boot Dampers are available for register boots with 6” and 8” collars and can be installed in most boot configurations. Features and Benefits:
- Solution for installing dampers when the ductwork is not accessible
- Does not require the ductwork to be taken apart
- Compatible with most zone control panels and systems
- Saves time and cuts labor costs
Warranty :
- 5 Years
Specifications:
| Sizes | 6”, 8” |
|---|---|
| Damper Actuator Type | 24VAC, 1.5VA, 3-wire power open/power close |
| Timing | 35 seconds |
5351 East Thompson Road Suite 142
Indianapolis, IN 46237
P: 888.359.0362
F:317.489.5204
info@iOhvaccontrols.com
www.iOhvaccontrols.com
iO-04-1280-111022
Documents / Resources
| iO
HVAC CONTROLS RBD-XX RBD Register Boot
Damper
[pdf] User Manual
RBD-XX RBD Register Boot Damper, RBD-XX, RBD Register Boot Damper, Register
Boot Damper, Boot Damper, Damper
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>