CareCo 8D03030003 Flexus Adjustable Bed Rail Instruction Manual
- June 12, 2024
- CareCo
Table of Contents
CareCo 8D03030003 Flexus Adjustable Bed Rail
Usage and Maintenance Instructions
- Flexus Adjustable Bed Rail
No.| Part Name| Quantity| No.| Part Name|
Quantity
---|---|---|---|---|---
1| Inner Tube| 1| 7| Safety Belt (Short)| 1
2| Plastic Curved Gasket| 4| 8| Main Frame| 1
3| Iron Arc Gasket| 4| 9| Supporting Foot – Right| 1
4| Pan Head Hexagonal Screw| 4| 10| Telescopic Inner Tube Set| 1
5| Supporting Foot – Left| 1| 11| Telescopic Outer Tube Set| 1
6| Cross Tube| 1| 12| Safety Belt (Long)| 1
STEP1.
Insert part 7 into part 5. Feed part 4 through parts 3, 5 and 2. Hold part 1
by hand. Use the hex wrench to lock part 4. Assemble part 1 and part 6 as
above.
STEP2.
Insert part 1 into part 8 and insert part 7 (seat belt) into part 9. Assemble
part 8 according to the method of STEP 1. Lock all screws tightly.
STEP 3.
Press part 10 into the marble and insert into part 11. Adjust the marble to
the appropriate hole position. Insert part 12 into part 7. Bind the mattress
with part 12 to complete assembly.
SAFETY INSTRUCTIONS
- When using make sure that the seat belt is tied to the matress and the bed board, and the mattress is pressed against the support foot.
- When the bolts on both sides are completely inserted into the hole, the armrest frame is fixed and can be used.
- The maximum load must not exceed 180kg.
- This product needs to be properly installed and used correctly. If it is installed incorrectly or used improperly it will cause damage to the product and risk personal injury.
- www.careco.co.uk
- 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>