JVA PAE348 USB Power Supply User Guide
- June 12, 2024
- JVA
Table of Contents
Electric Fencing Products
PAE348/PTE0348
USB Power Supply
The JVA USB power supply is deigned for usage with any USB powered wireless
cellular hotspot dongle (wingle). The output is set at 5.1v and has an
optional pin select to enable power cycling of the wingle every 24 hours.
The 24 hour reset is designed to wake up a wingle that has locked up.
Installation Instructions
To connect the wingle to the power supply, plug the USB socket into the
receiver, attached to the PAE348/PTE0348.
Attach the 12v power supply (12v battery) into the input connector via the
blue termination block included with the device.
NOTE: If the wingle does not connect to a cell tower, connect an external
antenna to port 1 if possible (TS9 connector) Caution – Use correct 5 pin
header
The PAE348 has two 5 pin headers; one for factory programming and one for USB
5.1v power out.
Do Not connect the USB socket to the factory programming header.
TS9 stub antenna
PTE0348 in Web Server case
Wingle with external Antenna
PAE348 with Wingle attached
Tel : 07 3888 3793 Email : sales@jva-fence.com.au
https://www.jva-fence.com.au/
ST138 6 July 2023
References
- fence.com.au
- JVA Electric Fencing — Index (Security, Monitoring, Agric, Wildlife, Equestrian, Stripgrazing — Solutions)
- Electric Fencing energisers, testers & more for Farms + Security
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>