Imou RV-L11-A Robot Vacuum Cleaner User Guide

Imou RV-L11-A Robot Vacuum Cleaner User Guide

Instructions Before Cleaning

Remove plugs and power cords that could entangle the robot.

Fold the carpet tasseled edges under to improve the cleaning efficiency.

Put the weight scales out of the area to be cleaned.

Do not use the robot on wet surfaces or floor with standing water.

Put away the mops or pieces of paper on the floor.

Preparation Before Using

1. Remove Protective Materials
   Place the robot on a flat surface and then remove all protective materials on the robot.
   

2. Dust Collection Charging Dock Placement
   Place the charging dock on a flat ground against the wall. Keep the area around the Charging Dock clear of objects
   

3. Charge the Robot
   Press and hold for 3s to power on the robot. Press to send the robot back to the Charging Dock to charge. The robot will enter standby mode when the robot is fully charged.

   • For the first-time cleaning, please ensure that the Robot is fully charged.
   • It is recommended that the Robot start cleaning from the Charging Dock to fast the recharging process.
   • The Robot automatically returns to the Dock to charge when its battery is low. It resumes cleaning from the last cleaning spot after the Robot has enough power.

Charging White flashing slowly
Fully charged Solid white

Cleaning System

1. Start
   Press to start Auto cleaning. Press and hold for 3s to start Spot cleaning
   

2. Pause
   During cleaning, press or to pause cleaning.
   The Robot enters sleep after it is paused for 60 minutes. Press or to wake up the robot.
   

3. Automatically / Manually Recharge
   Auto-recharge: Low battery during cleaning. / Cleaning completed.
   During cleaning, press or to pause cleaning. Press again, the robot returns to the charging dock and recharge.
   

4. Power Off
   When the Robot paused, press and hold for 3s to power it off. The LED indicator flashes white fast to off.
   During charging, the Robot can not be powered off or enters the sleep.
   

Mopping

1. Uninstall the Water Tank
   Press the release button on the dust box to remove the water tank
   

2. Install the Mop Bracket
   
   

3. Add Water
   Purified water is recommended.
   

4. Mop
   Press to start Auto mopping.
   Press for 3s to start Spot mopping
   

Connect to IMO Life App

Before set up the device, please make sure that the 2.4 GHz band Wi-Fi is enabled on your router.

Set Up the Device

Scan the QR code below or search for“Imou Life”in the app store to download and install the app. Open Imou Life app, tap + on the right upper corner of the page to add your device.

Device adding processes varies between different versions of app. Please follow the instructions in the app that you are using.

ResetWi-Fi and Reset the Device

Remove the Robot from the Charging Dock, press both and for 5s until the indicator flashes red.
When the device is powered off, press for 3s to power it on. When you hear the prompt sound, follow the instructions on the app to add the device

Features

You can view map, set no-go areas, configure rooms, adjust suction power and water volume, firmware updates and more in Imou Life app. Use the app to enjoy all available features.

References

• Il motore di ricerca per risparmiare sui tuoi acquisti | Trovaprezzi.it
• Imou RV-L11-A | Confronta prezzi | Trovaprezzi.it
• Aspirapolvere e Pulitrici al miglior prezzo | Trovaprezzi.it

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>