PTZOPTICS PT-STUDIOPRO Studio Pro Zoom Camera User Guide

PTZOPTICS PT-STUDIOPRO Studio Pro Zoom Camera

Product Information

833-888-9706

Preface

Congratulations on receiving your new PTZOptics Studio Pro. This manual is intended to help you use your new PTZOptics camera how you want, as quickly as possible. If you have any questions or issues with this process, please get in touch with our support team using one of the methods below: https://community.ptzoptics.com Ŝ 833-888-9706

Precautions
This product can only be used in the specified conditions in order to avoid any damage to the unit itself.

• Don’t subject the camera to rain or moisture.
• Don’t remove the cover. Removal of the cover may result in an electric shock in addition to voiding the warranty. In case of abnormal operation, contact [email protected] or https://community.ptzoptics.com
• Never operate outside of the specified operating temperature range, humidity, or with any other power supply than the one originally provided with the unit.
• Please use a soft dry cloth to clean the unit. If the unit is very dirty, clean it with diluted neutral detergent; do not use any type of solvents which may damage the surface.

Warning

• Electrical Safety
  Installation must be in accordance with national and local electric safety standards. Do not use any power supply other than the one originally supplied with this camera.

• Polarity of Power Supply
  The power supply output for this product is 12V DC with a maximum current supply of 2A. Polarity of the power supply plug is critical and is as follows:

• Handling

  • Avoid any stress, vibration, or moisture during transportation, storage, installation, and operation.
  • Do not lift or move the camera by grasping the camera head. Do not turn the camera head by hand. Doing so may result in mechanical damage.
  • Do not expose the camera to any corrosive solid, liquid, or gas to avoid damage to the cover which is made of a plastic material.
  • Ensure that there are no obstacles in the pan or tilt ranges of the camera lens.
  • Never power on the camera on before installation is complete.
  • Do not dismantle the camera – PTZOptics is not responsible for any unauthorized modification or dismantling.

Connecting Your Camera for the First Time

Your new camera has many options for connecting, powering, controlling, and streaming. This Quick Start Guide will help you understand how to use each of these different options.

1. Refer to the Table of Contents to find the various options available for your camera.
2. Read the instructions for the specific aspect of your camera that you want to use.
3. Refer to page 6 showing the illustration of the back plate of your camera to help determine which aspect of the camera you would like to use.

We have created videos to help you set up and use your camera. Scan the QR code below or type in the URL to get started! Click the links to view:

• Studio Pro Unboxing https://t.ly/eJaW
• Getting Started: https://ptzoptics.com/get-started/

Power Your Camera
Your camera can be powered through DC power (with the included adapter) or Power over Ethernet (with a switch or router rated for 802.3af).

Connecting the LED Panel Light

• Place the light on the Cold Shoe on the top of the camera or the tilt mount and tighten the locking disk to secure the light to the camera.
• You can power the light by connecting the supplied USB cable from the USB-C port on the back of the Panel Light to the USB-A port on the back of the camera. This can also recharge the light so it can be used wirelessly. The light can also be recharged by plugging the USB-A connector into any USB power source.
• Use the Lighting Selector Dial to switch from soft light all the way to crisp white light.

Connections

Studio Pro

Studio Pro with LED Panel Light and Mount Accessory

IR Remote Controller Guide

1. Standby Button

   • Press this button to enter standby mode.
   • Press it again to enter normal mode.
     Note : Power consumption in standby mode is approximately half of the normal mode.

2. Position Buttons

   • To set or call preset position

3. Button
   For multiple functions. Typically used when calling shortcuts.

4. & 13. Set / Clear Preset Buttons

5. Set Preset: Store a preset position

6. [PRESET] + Numeric button (0-9): Setting a corresponding numeric key preset position.

7. Clear Preset: Erase a preset position.

8. *[RESET] + Numeric button (0-9) or; [] + [#] + [RESET]:** Erase all presets

9. & 14. Pan / Tilt Control Buttons Press the arrow buttons to pan and tilt. Press the [HOME] button to face the camera back to the front. (PTZ Cameras Only)

10. Return Button
    Press the [RETURN] button to go back to a previous menu within the OSD menu.

11. Zoom Buttons

    • Zoom+: Zoom In (Slow and fast speed).
    • Zoom-: Zoom Out (Slow and fast speed).

12. L / R Set Buttons
    Set the Left & Right direction of the remote control.

    • [L/R SET] + [1]: Normal direction
    • [L/R SET] + [2]: Left and right directions will be reversed.
      Press buttons simultaneously.

13. Focus Buttons
    Used for focus adjustment.

    • [AUTO]: Automatically focus image on the center object.
    • [MANUAL]: Allow for manual control of focus. Make adjustments using [FAR] (focus on far object) and [NEAR] (focus on near object).

14. Camera Address Select Buttons
    Press the camera select button corresponding to the camera in which you want to operate.

15. Button
    For multiple functions. Typically used when calling shortcuts

16. Multiple Function Buttons
    Function 1. For setting camera IR address.
    Press 3 keys in sequence to set the camera IR address as follows:

    • *[] > [#] > [F1]:** Address 1
    • *[] > [#] > [F2]:** Address 2
    • *[] > [#] > [F3]**: Address 3
    • *[] > [#] > [F4]:** Address 4

17. Function 2. Image Freeze function
    Press [F4] to enable Image Freeze. After enabled, “Freeze” will be displayed in the upper left corner for 5 seconds.
    To disable Image Freeze, press [F4] again

18. Menu Settings

19. Used for adjusting the camera On Screen

    • Display (OSD) settings
    • [MENU]: Open or close the On Screen
    • Display menu

20. Backlight Button

    • Use to enable or disable backlight compensation.
    • Note: Only effective in auto exposure mode.
    • Note: If there is light behind the subject, the subject may appear darker. In this case, use Backlight Compensation to enhance image.

21. P / T RST Button

    • Perform camera self-calibrate pan and tilt movement. (PTZ Cameras Only)

IR Shortcut Functions:

• *[] > [#] >[1]:** Display OSD menu in English
• *[] > [#] > [3]:** Display OSD menu in Chinese
• *[] > [#] > [4]:** Show IP address
• *[] > [#] > [6]:** Quickly restore the default settings
• *[] > [#] > [8]:** Show the camera version
• *[] > [#] > [9]:** Quickly set mount mode (flip / normal)
• *[] > [#] > [MANUAL]:** Resets IP information to default
• *[#] > [] > [7]:** OnePush White Balance Trigger (Camera must be in OnePush White Balance)
• *[#] > [] > [4]:** Enable Dynamic IP address
• *[#] > [] > [#] > [1]:** Sets IP address to 192.168.100.81
• *[#] > [] > [#] > [2]:** Sets IP address to 192.168.100.82
• *[#] > [] > [#] > [3]:** Sets IP address to 192.168.100.83
• *[#] > [] > [#] > [4]:** Sets IP address to 192.168.100.84
• *[#] > [] > [#] > [5]:** Sets IP address to 192.168.100.85
• *[#] > [] > [#] > [6]:** Sets IP address to 192.168.100.86
• *[#] > [] > [#] > [7]:** Sets IP address to 192.168.100.87
• *[#] > [] > [#] > [8]:** Sets IP address to 192.168.100.88
• *[#] > [] > [#] > [9]:** Sets IP address to 192.168.100.89
• *[#] > [] > [#] +>[0]:** Sets IP address to 192.168.100.80
• *[#] > [] > [7]:** OnePush White Balance Trigger (Camera must be in OnePush White Balance)

IP Connection

The camera will automatically acquire an IP address when connected to the network. If the network cannot assign an IP address, the camera will default to “192.168.100.88”. If you don’t know the camera IP, please do one of the following:

• Method 1 : Use an Internet browser and type in “http://ptzoptics.com/local” to reach the camera’s web interface. The default username and password for the camera is “admin.” Once you are logged in you can navigate to the “Network Settings” page to view your camera’s Network Settings. Here you can see the IP address your camera has and choose if you want it to keep the DHCP address or set a unique IP address with the Static option.
  • Note #1: If you are setting up multiple cameras, you should do so one at a time. It is recommended to give each camera a different Device ID. To do this you can navigate to the “Device Info” tab and type in a unique name in the Device ID text box. This will allow you to set up unique addresses that you can bookmark to connect to each camera. Example, “http://camera1.local/”and “http://camera2.local/”
• Method 2: Use the IR remote shortcut [*] > [#] > [4] to display the camera’s IP address at the top of any live video from the camera. The HDMI output is active by default.
  • Note #2 : In System Settings you should click the “Check Firmware Version” button to make sure you have the latest firmware. If there is a new firmware version you should follow the instructions to update your camera.

Tip: To control multipe cameras with a single IR remote, you can give each camera a unique IR remote control selection in System Settings.

To quickly assign an IP address using the IR Remote

• *[] > [#] > [MANUAL]:** Resets IP information to default
• *[#] > [] > [4]:** Enable Dynamic IP address
• *[#] > [] > [#] > [1]:** Sets IP address to 192.168.100.81
• *[#] > [] > [#] > [2]:** Sets IP address to 192.168.100.82
• *[#] > [] > [#] > [3]:** Sets IP address to 192.168.100.83
• *[#] > [] > [#] > [4]:** Sets IP address to 192.168.100.84
• *[#] > [] > [#] > [5]:** Sets IP address to 192.168.100.85
• *[#] > [] > [#] > [6]**: Sets IP address to 192.168.100.86
• *[#] > [] > [#] > [7]:** Sets IP address to 192.168.100.87
• *[#] > [] > [#] > [8]:** Sets IP address to 192.168.100.88
• *[#] > [] > [#] > [9]:** Sets IP address to 192.168.100.89
• *[#] > [] > [#] > [0]:** Sets IP address to 192.168.100.80

Web UI

To access the Web UI:

• Enter “http://ptzoptics.local/” or the camera’s IP address into a web browser.
• Enter the username and password into the login fields. Both the username and password are “admin” by default. You can change the login credentials on the System Settings page.
• The Navigation panel allows you to quickly and easily select the various control options for the camera. It can be collapsed to make more room on the user interface.
• The Camera Settings page gives you access to the Camera’s Video Feed, PTZ Control, OSD Menu, Preset Control, Speed Settings, Image Settings & Control Settings.
• The Audio & Video Settings page gives you access to the Video Encoding Settings, IP Video Stream 1 / Stream 2 Encoding Settings & Audio Encoding Settings sections of the network video feeds.
• The Streaming Settings page gives you access to the RTMP(S) Settings, SRT Settings, RTSP Settings, Multicast Settings & ONVIF Settings sections.
• The UI / Profile Settings page gives you access to the Logo Upload, Profile Configuration, Quick Profiles, Custom CSS & Tutorial Mode sections.
• The Network Settings page grants access to the LAN Settings & NTP Settings sections.
• The NDI® Config Settings page gives access to the camera’s NDI settings.
• The MIDI Control page grants access to the PTZOptics MIDI Control, Control Mapping, Mass Command Edit & Information sections. The MIDI Control page can be reached by accessing the HTTPS version of the camera’s web interface.  (https://[CameraIP]/). The page must remain open for MIDI Control to function.
• The Device Information page gives access to the Device Information section.
• The System Settings page gives access to the HTTPS Settings, IR Remote Channel Selection, Access Settings, Firmware Check, Restore Default & Firmware Upload sections.

For complete information regarding the Web UI, please refer to the User Manual found at https://ptzoptics.com/documentation/

HDMI Connection, USB Connection

• HDMI Connection
  • To achieve best results, we recommend using an HDMI 1.3 or better cable. HDMI cables can be run up to 49 feet (15 Meters). The HDMI output has a maximum resolution and framerate of 1920×1080 @ 60 FPS.
• USB Connection
  • Your camera includes a USB-A to USB-C Screw Locking Cable for connecting to a

3.5 mm Audio Connection
Your camera comes with a 3.5mm audio connection which allows you to embed audio on your video stream.

1. Connect a 3.5mm audio cable (not included) to the 3.5mm audio in port of your camera.
2. Connect the other end of the cable to the device of your choice.

Note: The 3.5mm audio connection requires Line Level audio in order to function.

NDI®|HX3 Streaming and Control

• Your camera can output NDI®|HX3. NDI is a network based protocol for low latency video, audio, and control. NDI®|HX is the High Efficiency variant that uses less bandwidth across your network.
• To get started with NDI®|HX3, download and install the latest NDI®|HX tools at: https://ndi.video/tools/ndi-tools/
• In addition to allowing your computer to view NDI feeds, the NDI Tools also offer a number of apps for using NDI including but not limited to:
  • Studio Monitor to view & control all of the NDI sources on your network.
  • Webcam to convert your NDI source to a virtual input for use with video conferencing software.
  • Access Manager to manage and access your NDI sources.

UVC 1.5 Control

• Your camera is USB Video Class (UVC 1.5) compliant. This means that you can control your camera’s zoom as well as change camera settings through your USB connection.
• Most video software offers some form of UVC control.
• To find software designed for your camera, please refer to the “Control Page” section of this guide.

RTSP Streaming, RTMP Streaming

RTSP Streaming
Your camera is able to send two (2) RTSP streams for viewing video through your LAN. You can view these streams by using a video mixing software and typing in the following strings:

• Stream 1 (HD): rtsp://(Camera IP):554/1
• Stream 2 (SD): rtsp://(Camera IP):554/2

RTMP Streaming

• Your camera can send two (2) RTMP(S) streams. To use your camera with an
• RTMP stream, you will need a Stream URL & Stream Key, which you receive from a CDN or from the social network to which you want to stream.
• Once the Stream URL & Stream Key are acquired, login to the camera’s Web UI and head to the Streaming Settings page. Enter the information into the appropriate fields, then toggle the Enable Stream dropdown to On for the desired stream, and finally, click the Apply button. Note: Stream 1 has a maximum resolution of 1920×1080 @ 60 FPS. Stream 2 has a maximum resolution of 720×480 @ 60 FPS.

SRT Streaming

• Your camera can output an SRT stream. It can be set up as a Caller or Listener. You can configure the SRT settings from the Streaming Settings page of the camera’s Web UI.

Control Page

PTZOptics offers a wide range of methods for controlling your cameras. Check out the list below, or visit https://ptzoptics.com/applications/ for available tools:

• Web UI
  The updated Web UI offers just about everything you’ll need. You have access to PTZ & Preset control, video tuning, streaming settings, and much more.

• IR Remote Controller
  The camera includes a free IR remote controller for standard PTZ and Preset control, as well as access to numerous shortcuts to enhance your experience with the IR remote.

• Joystick Controllers
  Your camera supports a plethora of control protocols, allowing for use with IP & Serial joystick controllers. The PTZOptics SuperJoy offers the most synergy when it comes to controlling the PTZOptics cameras. You can find more information on the SuperJoy here: https://ptzoptics.com/superjoy/

• iOS Apps
  The PTZOptics Control Pro 2 iOS app offers standard PTZ & Preset control right from your iPhone! Find more information here: https://ptzoptics.com /ptzcontrol-pro-2/

• CMP
  The Camera Management Platform, or CMP for short, is a computer software designed to make your life easier. It includes many tools built in for camera control, color matching, auto tracking, and more! https://ptzoptics.com/cmp/

• OBS Plugin
  The Dockable OBS Plugin offers intuitive control for up to 8 cameras. Give it a try! Find information here: https://ptzoptics.com/obs-plugin/

• Control API
  Need something we currently don’t offer? We have control APIs online so you can make something of your own. https://ptzoptics.com/developer-portal/

• Documentation
  Need more information about your specific camera? Read the camera’s User Manual at https://ptzoptics.com/product-documentation/

Warranty

PTZOptics includes a limited parts & labor warranty for all PTZOptics manufactured cameras. The warranty is valid only if PTZOptics receives proper notice of such defects during the warranty period. PTZOptics, at its option, will repair or replace products that prove to be defective. PTZOptics manufacturers its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Warning – This is a class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
• Remote Control Battery Safety Information – Store batteries in a cool and dry place. Do not throw away used batteries in the trash. Properly dispose of used batteries through specially approved disposal methods. Remove the batteries if they are not in use for long periods of time. Battery leakage and corrosion can damage the remote control. Do not use old batteries with new batteries. Do not mix and use different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). Do not dispose of batteries in a fire. Do not attempt to short-circuit the battery terminals.

Copyright Notice
The entire contents of this manual / guide, whose copyright belongs to PTZOptics, may not be cloned, copied, or translated in any way without the explicit permission of the company. The product specifications referred to in this document are for reference only and as such are subject to updating at any time without prior notice.
©2023 | PTZOptics | All Rights Reserved

References

• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• Customer Portal
• NDI Core Suite
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
• PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>