ELE RIX EX-L12V100R Elerix High Energy LFP Front Terminal 12V Battery User Manual
- June 4, 2024
- ELE RIX
Table of Contents
ELE RIX EX-L12V100R Elerix High Energy LFP Front Terminal 12V Battery
Service Connector Application Notes
The EX-L12V100R Service Connector is a magnetic 5-pin connector that allows
direct access to the individual cells of the 12V battery. 
The function of the connector is following
- Measure the voltage of the individual cells.
- Allow monitoring and connection of the BMS
- Connect auxiliary devices to charge or balance individual cells
- Integrate the battery into a large solution with direct access single cells.
MAXIMAL CONNECTOR CURRENT LOAD: 2 AMPS
WARNING: The maximal continuous load of the connector is 2 Amps.
If you wish to use the magnetic connector to charge or balance individual
cells, the current passed through the connector may not exceed 2 Amps.
SHORT-CIRCUIT WARING
WARNING the individual output pins are directly connected to the individual cells. There are no fuses, nor any other protection.
You must avoid any short circuit by accidental connection of the pins or by
improper wiring on the opposite part of the connector.
Do not try to disassemble the service connector by removing the screws.
Safety recommendation: if not used, please cover the service connector by
a self-sticking tape or any other adhesive cover. This way you can prevent
accidental touching of the pins by some metal objects put on the upper side of
the battery.
Warning – no parallel connection
Never connect individual 12V batteries in parallel by means of the service
connector. The service connector is not designed to transfer large currents
for a parallel connection of the batteries.
Limited Warranty
There is no warranty for the whole battery if there is a user damage to the service connector or if there was a short circuit or abuse from over-current on the terminals of the service connector.
Are you interested in more details? Visit our online presentation. www.elerix.com