MKETECH RG-GM824 NIGHT WALKER Wireless Mouse Instruction Manual
- June 5, 2024
- MKETECH
Table of Contents
MKETECH RG-GM824 NIGHT WALKER Wireless Mouse
Product Key Position Display Diagram
Product Introduction
- Left Mouse Button
- Right Mouse Button
- Scroll Wheel Button
- DPI Button
- Forward Button
- Backward Button
- Illuminated Logo
Special Product Features
- DPI Adjustment : Click the DPI button/④ to switch to the next DPI setting. The mouse light will indicate the DPI levels, which are 800 red, 1600 green, 2400 blue (default), 3200 purple, and 4000 cyan.
- Mode Switch: Toggle the power switch on the bottom of the mouse to select the connection mode: wireless, off, or 2.4G.
- Sleep Mode: The mouse will enter sleep mode after one minute of inactivity or during charging. It can be awakened by pressing any button, and it will still enter sleep mode after no activity.
- Low Voltage Mode : Low battery warning: When the battery is low, the red light at the DPI position will flash as a warning, and the mouse will remain in low battery warning status as long as it is in use.
- 2.4G Receiver Re-pairing :
- Make sure the mouse is turned on when starting up. Unplug the base from the computer’s connection cable.
- Simultaneously press and hold the left and right mouse buttons/①& ② and the scroll wheel button/③ for three seconds to enter re-pairing mode.
- Reinsert the base, and the mouse will automatically pair with the inserted base.
Connection Methods
2.4G Connection : Switch the mouse mode switch to 2.4G, and insert the
base into the USB port of the computer. Wait for the mouse to connect, and the
mouse light will turn on. If the mouse does not respond, please repeat the
above steps.
Wireless Connection:
- Switch the mouse mode switch to BT, and press and hold the DPI button for 3 seconds to enter pairing mode.
- From the computer system, go to “Settings.”
- Under “Devices,” click “Add Device” and look for the “NIGHT WALKER” device to connect.
Note: Initial connection may take a few seconds.
Driver Installation
Please visit the MKETech official website to find and download the driver
installation package for the NIGHT WALKER model.
Official website: MKETechelectronics.com
Product Specifications
Main Control IC : TLB8271
Optical IC : PXI PAW3325
DPI Values: 1200-2400-4000-7200
Left/Right Button Lifespan : 8 million clicks
Middle Button Lifespan: 200,000 clicks
DPI Button Lifespan: 200,000 clicks
Side Button Lifespan : 300,000 clicks
Encoder Lifespan : 50,000 rotations
Lighting: RGB
Power Consumption : 3.7V 24mA
Product Dimensions: 118.7664.3438.05mm
Product Weight : 80g
Cable : Type-C interface black braided cable
Number of Buttons : 6 buttons
Compatible Systems : Windows, Mac, Chromebook
One-Year Warranty
Thank you for your purchase, and we take pride in the quality of our products. MKE Tech Electronics product warranty does not cover any device or product that is not manufactured by MKE Tech Electronics (including, but not limited to laptops, smartphones, devices, or any other product that may be used in conjunction with the MKETech Electronics product). MKE Tech Electronics warrants to the original purchaser that its products are free from defects in materials and workmanship during the specified warranty period and will remain in like-new condition for as long as the original purchaser owns the product.The warranty period is indicated on the MKETech Electronics product’s packaging or in the provided documentation. MKETech Electronics Limited Product Warranty excludes damage caused by accidents, misuse, improper use, neglect, unauthorized modifications, ownership transfer, or unauthorized repairs.
Warranty Terms
- This warranty is applicable to the original purchaser and is non-transferable.
- A proof of purchase (receipt or invoice) must be provided to make a warranty claim.
- This warranty covers manufacturing defects and failures occurring under normal and expected use of the mouse. It does not cover damage resulting from accidents, misuse, improper use, neglect, unauthorized modifications, or unauthorized repairs.
Contact Information
For warranty claims and inquiries, please contact:
Company Name : MKETech Inc
Address: 2000 South Grove Ave, Suite 109, Ontario, CA, USA 91761
Phone: (909)-850-4601
Email: info@MKETechelectronics.com
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>