Aqara SDLD01 Smart Lock User Manual
- June 1, 2024
- Aqara
Table of Contents
**Aqara SDLD01 Smart Lock User Manual
**
Device Binding & Initialization
Download the Aqara Home app
Search for “Aqara Home” in the Apple App Store or Google Play or can scan
the following QR code to download the Aqara Home app.
Open the app, tap “+” in the upper right corner of the homepage to enter the
page of “Add the device”. Choose “Smart Lock U50” and then install the door
lock device according to the instructions.
The actual operations are subject to change due to the updates of the Aqara
Home app. Please follow the instructions of the app.
Add the User
Enter the page of the door lock device and add the door lock owner according
to the instructions on the app.
Notes: The door lock cannot be locked normally without adding users.
Add the Device to Home Kit (for iOS users)
After the door lock is powered on for the first time, click “+” at the upper right corner of the Apple Home app in the iOS, select “Add Accessory” or open Aqara Home app. Tap “Bind Home Kit” in the “General Settings” column of the setting on the detail page of the door lock. Scan or manually input the Home Kit code as prompted (Home Kit code can be found when you open the battery cover of the indoor door lock). Then add users according to the instructions. Home Kit only supports the lock and unlock, smart automation setting and Apple Home Key.
Add to Apple Home Key (for iOS users)
After it is connected with Home Kit, one virtual door card will be automatically generated in the Apple “Wallet” app. You can use an iPhone or Apple Watch, which supports the Apple Home Key function to unlock by holding it close to the door lock.
To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS
is recommended.
Controlling this HomeKit-enabled accessory automatically and away from home
requires a HomePod, HomePod mini, or Apple TV set up as a home hub. It is
recommended that you update to the latest software and operating system.
To use home keys, iPhone XS or later with iOS 15 or later and Apple Watch Series 4 or later with watchOS 8 or later are required.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
For more details about the product, please visit
www.aqara.com/us or scan the QR code to get the
detailed electronic manua.
Or scan the QR code to watch the installation video.
FCC ID:2AKIT-SDLD01
Federal Communications Commission (FCC) compliance statement:
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC: 22635-DLD01D
IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES‐003.
This device complies with RSS‐247 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Online Customer Service:
www.aqara.com/en/support.html
Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No.
3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan
District, Shenzhen, China
Email: support@aqara.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>