VEVOR ZWE-ZSZ-02 Standing Desk Converter User Manual

: June 12, 2024
: VEVOR

Table of Contents

INTRODUCTION
SAFETY PRECAUTIONS
ASSEMBLY PRECAUTIONS
USE PRECAUTIONS
ASSEMBLY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
ASSEMBLY STEPS
COMPLETION
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VEVOR ZWE-ZSZ-02 Standing Desk Converter

VEVOR ZWE-ZSZ-02 Standing Desk Converter

INTRODUCTION

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

SAFETY PRECAUTIONS

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury. SAVE THIS MANUAL Check carefully to make sure there are no missing or defective parts, Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be able for damage or injury caused by improper mounting, incorrect assembly,or inappropriate use.

PINCH POINT

DO NOT place hands on or near support bars.Movingpartscancrushand cut.Pinch points are created during lifting and lowering the work surface Failure to follow these instructions may result in serious personal injury.

ASSEMBLY PRECAUTIONS

Assemble only according to these instructions. Improper assembly can create hazards.
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Keep assembly area clean and well-lit.
Keep bystanders out of the area during assembly.
Do not assemble when tired or when under the influence of alcohol,drugs or medication.
The product capabilities apply to properly and completely assembled products only.
Assemble on a flat, level, hard and smooth surface capable of safely supporting the acrylic table.

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

This product is not a toy. Do not allow children to play with or approach this item.
Use as intended only. Do not sit or stand on the table.
Inspect before every use. Do not use it if parts are loose or damaged.
Use only on flat, level, and hard surfaces.

ASSEMBLY INSTRUCTIONS

For additional information regarding the parts listed in the following pages,refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.