BERTAZZONI DW24S2IPB Dishwasher Instruction Manual
- June 13, 2024
- Bertazzoni
Table of Contents
BERTAZZONI DW24S2IPB Dishwasher
Product Information
| Product Dimensions | Value |
|---|---|
| Width Range | 32 1/4 – 34 1/4 inches (820-870 mm) |
| Height Range | 3 15/16 inches (100 mm) + 2 inches (50 mm) adjustment |
| Depth | 25 1/2 inches (647 mm) |
Product Usage Instructions
Cutout Dimensions
| View | Width | Height |
|---|---|---|
| Side View | 23 9/16 inches (598 mm) | 21 5/8 inches (550 mm) |
| Front View | 23 9/16 inches (598 mm) | 4 1/8 inches (105 mm) |
| Top View | 32 1/2 – 34 3/8 inches (824-874 mm) | 24 inches (610 mm) or 23 5/8 |
inches (600 mm) without side
trims
Electrical & Water Connection:
- A properly-grounded, horizontally-mounted electrical receptacle should be installed according to the provided drawing.
- To connect the water mains to the water inlet valve thread, use a 3/8 water inlet hose and a 3/4 metal adapter with a length of 60 inches (1524 mm) (not supplied).
Installation Requirements:
- Follow local codes and ordinances for drain requirements.
- Install a waste line with an air gap (not supplied) or a minimum of 30 inches (762 mm) high drain loop to prevent backflow.
- The drain hose provided is 74 inches (1880 mm) long and should be connected at a minimum of 20 inches (508 mm) from the floor.
Custom Panel:
- Door tension can be adjusted to accommodate custom panel weights from 7 lb (3 kg) to 18 lb (8 kg).
- For custom panels weighing from 18 lb (8 kg) to 22 lb (10 kg), it is necessary to purchase the optional Heavy Duty Springs kit HS24DW.
- The suggested panel thickness is 3/4 inches (20 mm).
PRODUCT DIMENSIONS
- including a 3/4” (20) thick custom panel
CUTOUT DIMENSIONS
ELECTRICAL & WATER CONNECTION
- E A properly-grounded, horizontally-mounted electrical receptacle should be installed according to this drawing.
- W To connect the water mains to the water inlet valve thread, use a 3/8” water inlet hose and 3/4” metal adapter with a length of 60” (1524) (not supplied).
Connections placement must be located on either side of the cutout.
INSTALLATION REQUIREMENTS
Follow local codes & ordinances for drain requirements. Install a waste line
with an air gap (not supplied) or, alternatively, at least 30” (762) high
drain loop to prevent backflow. Drain hose is 74” (1880) long. Drain hose must
be connected at minimum 20” (508) from the floor.
Dimensions in parentheses are millimeters unless otherwise specified.
CUSTOM PANEL
Door tension can be adjusted to accommodate custom panel weights from 7 lb (3 kg) to 18 lb (8 kg). For custom panels from 18 lbs (8 kg) to 22 lbs (10 kg), it is necessary to purchase the optional Heavy Duty Springs kit HS24DW. Suggested panel thickness is 3/4” (20).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>