ACT Connectivity AC8302 Dual Monitor Arm Instruction Manual
- June 13, 2024
- ACT Connectivity
Table of Contents
ACT Connectivity AC8302 Dual Monitor Arm
Product Information
The product is a Monitor Desk Mount designed to hold 2 monitors. Its model
number is AC8302. The product is manufactured by ACT, located at
Koolhovenstraat 1E, 3772 MT Barneveld, The Netherlands. It comes with a 5-year
warranty provided by PAP.
The product is made in China.
Product Usage Instructions
- Before starting the installation and assembly process, make sure to read the entire instruction manual.
- Ensure that you have all the necessary components and tools required for the installation.
- Follow the step-by-step instructions provided in the manual for proper installation and assembly of the Monitor Desk Mount.
- When assembling the mount, use the specified techniques such as pulling, repositioning, putting, and turning as indicated by the corresponding letters (a, b, c, d) mentioned in the manual.
- For any safety information regarding the product, please visit www.act-connectivity.com/safety.
- If you need any service, manuals, firmware updates, or additional information about the product, please visit www.act-connectivity.com.
Read the entire instruction before you start the installation and assembly.
CAUTION : Use with products heavier than the rated weights indicated may result in instability causing possible injury.
-
Mounts must be attached as specified in assembly instructions.
-
Improper installation may result in damage or serious personal injury.
-
Make sure that the supporting surface will safely
support the combined weight of the equipment and all attached hardware and components -
Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
-
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children
-
This product is intended for indoor use only. Using this product outdoors could lead to product failure and injury.
-
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to the installation.
-
MAINTENANCE : Check that the bracket is secure and safe to use at regular intervals (at least every three months).
You can find safety information at www.act- connectivity.com/safety
References
- Safety instructions | ACT
- Business Listing and Review Management | Connectivity
- Home | ACT
- Safety instructions | ACT