MYW HP 63-1 L Motorised Built-in Lift Instruction Manual
- June 13, 2024
- MYW
Table of Contents
MYW HP 63-1 L Motorised Built-in Lift
Product Information
- Product Name: Motorized Monitor Lift Stand
- Model Numbers: HP 63-1 L, HP 63-2 L
Product Usage Instructions
- Ensure correct mounting during installation.
- Take note of the enclosed assembly instruction for proper guidance.
- The enclosed mounting materials are specifically intended for installation on solid masonry or concrete walls.
- If you are installing on other types of walls such as hollow block bricks, plasterboard, or lightweight constructions, please consult a plumber or specialized dealer for appropriate materials.
- Carefully assemble all parts according to the provided assembly instruction.
- Do not exceed the given dimensions and weight stated on the packaging.
- Follow the provided sketch for installation.
- Make sure everything is properly assembled and securely mounted.
- It is important to avoid incorrect and faulty installation as the responsibility will not be taken by the manufacturer.
- If you have any doubts or questions about the installation process, seek assistance from a professional installer or specialized dealer.
Note : The provided text contains multiple languages. The product information and usage instructions have been extracted and presented in English.
- HP 63-1 L
- HP 63-2 L
Motorized Monitor lift stand for installation in furniture.
REQUIRED TOOLS
DIMENSION
CONNECTING WIRES
HOW TO FIX
Troubleshooting Guide
This Troubleshooting Guide will assist you in identifying and solving common problems and answering questions you may have about the product. Contact your place of purchase should the answer to your question or problem not be found in this Troubleshooting Guide and/or for any after service parts and sales support.
Possible reasons motorized mount does not respond to the remote control.
TV Mount
- The system may be an error. Check if the unit beeps three times after pressing the button. If so, please reset the system.
- The system may be overheating. Check if the unit beeps four times after pressing the button. If so, allow the unit to cool down and return to room temperature. (about 30 minutes)
- The AC/DC end of the power cord may be unplugged/disconnected from the outlet/mount. Check the connection to ensure the unit has power.
- Incorrect operation. Check if the unit beeps once after pressing the button. If so, please follow the instructions found in the manual to properly operate the mount.
Remote Control
- The remote control operating distance may be too far and not in range of the mount. The acceptable range should be less than 30 feet (10m).
- The batteries in the remote control may be low or dead. Replace the batteries.
- The remote control may be broken. Check to see if the indicator LED found on the remote lights when a button is pressed. If not, contact your place of purchase for a replacement.
The TV mount stops moving during operation and emits a long beep.
- Check to see if a foreign object is impeding the mount from moving. If so, remove the object and discard it.
- The weight of TV may exceed the maximum weight limitation of the mounting system.
- The motor wire may be broken. Reset the system. If the problem still exists, contact your place of purchase for a replacement.
The TV mount is making an abnormal noise or sound.
- Check all power connections and reset the system. If the unit continues to make an abnormal noise, please contact your place of purchase for a replacement