Blueair Blue Pure 511 Air Purifier User Manual

: June 13, 2024
: Blueair

Table of Contents

Blueair Blue Pure 511 Air Purifier
Product Information
Safety Information
Safety information
Regulatory information
Product map
Getting started
Set it and forget it
Maintenance information
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Blueair Blue Pure 511 Air Purifier

Product Information

The Blue Pure 511 is an electrical appliance designed for indoor use only. It is an air purifier that helps reduce the risk of fire, electric shock, or injury. The model number of the Blue Pure 511 is 3131000000. It features a one-touch button, air outlet, fan motor, filter shelf ring (reusable), and a washable pre-filter with outer fabric. The device complies with Part 15 of the FCC Rules and is a Class B digital device.

Safety Information

Place the air purifier on the floor or a stable surface to prevent tipping.
Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms, or pool areas.
Always turn off and disconnect the appliance from the power supply before moving, changing filters, cleaning, or performing maintenance.
Never clean the air purifier with gasoline, chemical solvents, or corrosive materials as they may cause damage.

Safety information

Blue Pure 511

Product name Blue Pure 511
Model number 3131000000

Blue Pure 511 air purifiers are electrical appliances for indoor use only, take the necessary precautions to reduce the risk of fire, electric shock or injury.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have beengiven supervision or instruction concerning use of the appliance by a person responsible for their safety.
Supervise children to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Always disconnect the appliance from the power supply before maintenance.
Do not attempt to open or service the appliance yourself. Service must be done by the manufacturer, service agent or similarly qualified personnel using only original Blueair spare parts.
Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazard, a damaged power cable must always be replaced by the manufacturer, service agent or similarly qualified person.
If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply and contact Blueair.
The power plug must be firmly inserted in the power socket
When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug.
Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet.
Do not use an extension cord or a power strip. Refer to the rating label on your appliance.
Do not alter the power plug in any way. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet.
Do not use the included power cord for anything else but the appliance.
Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance.
Do not place any objects on top of or directly against the appliance.
Do not sit on, stand, climb onto or hang from the appliance.
Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fire.
Keep the appliance and power plug away from water and other liquids.
Keep the appliance and power plug away from chemicals such as pesticides and deodorants.
Place the air purifier on the floor or a stable surface to prevent tipping.
Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms or pool areas.
Always turn off and disconnect the appliance from the power supply before moving the unit,
changing filters, cleaning or carrying out maintenance procedures.
Never clean with gasoline, chemical solvents, or corrosive materials as these agents may damage the air purifier.

Regulatory information

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Product map

A touch button
B Air outlet
C Fan motor
D Filter shelf ring (Reusable. Do not dispose of)
E Main filter
F Washable pre-filter, outer fabric
G Hidden cord sleeve

Getting started

Plug and play
Plug the power cable into a wall outlet and press the center one touch button to turn the air purifier on and adjust the fan speed mode.

Set it and forget it

Night mode: Press 1 time Low fan speed Dim lights
Everyday mode: Press 2 times Medium speed
Boost mode: Press 3 times High speed
Off: Press 4 times

Cleaning your washable pre-filter
Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre- filter´s label. Hang to dry.

Step 1
Turn the air purifier off and unplug it. Rotate the top counter-clockwise to unlock and remove it.
Step 2
Open the pre-filter panel and remove the pre-filter.
Step 3
Wash according to instructions on the pre-filter´s label.
Step 4
Place the pre-filter back. Adjust the prefilter to hide the power cord in the back.
Step 5
Push the top cylinder down, rotate it clockwise to lock it.

Important! Press the Velcro strips together on the pre-filter before machine washing.

Maintenance information

Important! Disconnect the air purifier from the power supply before maintenance
Changing your main filter
When your air purifier’s indicator light turns red, it’s time to change the main filter. This typically occurs around 6 months of operation, depending on usage and your air quality conditions. Blueair-Blue-Pure-511-Air-Purifier-
FIG-11

Step 1
Turn the air purifier off and unplug it. Rotate the top counter-clockwise to unlock and remove it.
Step 2
Remove the fabric pre-filter and the filter shelf ring.
- Note: Do not dispose the filter shelf ring.
Step 3
Use the filter handles to lift out the old filter and replace with new.
Step 4
Place the pre-filter back. Push the top cylinder down, rotate it clockwise to lock it.
Step 5
Press the button for 15 seconds until the light becomes white to reset the filter indicator.

Important! Do not wash the main filter. The main filter is not washable or reusable. It´s advised to clean the sensor when changing the main filter.

Disposal and recycling
This air purifier should be recycled as electronic waste. If you have any questions regarding the disposal of this air purifier, please contact your local authorities to ask for the correct method of recycling.
Scan here to access extended manual, FAQs, and information on registering for your warranty.