Moes YK216-9C Transmitter Remote Control User Manual
- June 13, 2024
- MOES
Table of Contents
Moes YK216-9C Transmitter Remote Control
Product Information
The YK2169-9C is a remote control that transmits RF signals with a frequency of 433.92MHz and modulation mode of OOK. It features an 8-segment digital tube display window that can show 9 channels from 0 to 8. Each channel can be easily switched by pressing the corresponding button, and different actions can be performed based on the code values received by the receiver.
The remote control operates on a working voltage of DC12V and has a working current of 16mA. It uses an imitation learning code encoding mode and supports a total of 9 channels.
Product Usage Instructions
- Channel Setting
- Press the + button to enter setup mode. The digital tube will start flashing.
- In setup mode, press the + button to increase the channel value. When the channel value reaches 8, pressing the button again will start increasing from 0.
- In setup mode, press the – button to decrease the channel value. When the channel value reaches 0, pressing the button again will start decreasing from 8.
- Press the SET button to exit setup mode. The digital tube will stop flashing.
- Transmit Code
- In non-setup mode, press any button to start transmitting a signal. The red indicator in the lower right corner will flash rapidly to indicate transmission.
- Release the button to stop transmitting. The digital tube will stop lighting.
If you have any further questions or need assistance, please do not hesitate to contact us at service@moeshouse.com.
Thank you for choosing MOES and we are dedicated to ensuring your complete satisfaction.
Product Description
- YK2169-9C is a remote control for transmitting RF signal with a frequency of 433.92MHz and modulation mode of OOK.This product has a display window of 8-segment digital tube, which can display a total of 9 channels from 0 to 8.
- Different channels can be freely switched by pressing the button, and different actions can be performed when the receiver receives different code values.
Function Description
Channel setting
- Press “ ”,digital tube flashes for setup mode.
- Press “ ”in setup mode,channel value increases.When the channel value increases to 8,press the key again to start increasing from 0.
- Press “ ”in setup mode,channel value decreases.When the channel value decreases to 0,press the key again to start decreasing from 8.
- Press“ ”in setup mode,the digital tube stops flashing for exiting setup mode.
Transmit code
- Press any key among “ ”in non-setup mode,then remote starts to transmit signal,the red indicator in the lower right corner flashes fast to indicate it is transmitting.Release the key to stop transmitting and the digital tube stops lighting.
Product parameter
| Working voltage： | DC12V |
|---|---|
| Working temperature： | -20℃ – +60℃ |
| Encoding mode： | Imitation learning code |
| Working frequency： | 433.92MHz |
| Working current： | ≤16mA |
| Number of channels | 9 |
Product Description
This remote control can be used to control RF433 devices with encoding 1527.Before using it, you need to simply pair the remote with the buttons on your curtain switch .Correspond the three buttons on the remote control (open, pause, close) to the corresponding functions of the required device.No other codes available for this curtain control system,highly recommend to use this special remote for controlling our MoesGo curtain switch or switch module.Do not use this remote to control other irrelevant devices.
Product parameter
| Working voltage： | 12V |
|---|---|
| Working frequency： | 433MHz |
| Encoding mode： | Imitation learning code |
| Working current： | ≤18mA |
More information
-
Thank you for your support and purchase at we MOES,we are always here for your complete satisfaction,just feel free to share your great shopping experience with us.
-
If you have any other need,please do not hesitate to contact us first,we will try to meet your demand. Support: service@moeshouse.com.
WENZHOU NOVA NEW ENERGY CO.,LTD
- Address: Power Science and Technology Innovation Center, NO.238, Wei 11
- Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
- Tel:+86-577-57186815
- Email:service@moeshouse.com.
AMZLAB GmbH
- Laubenhof 23, 45326 Essen
FoLoW US
- @moessmart
- @moes_smart
- @moes_smart
- moes
- @moes_smart
- www.moeshouse.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>