WATTS PR03 RF 230 Vision Smart Wireless Plug Receiver Installation Guide
- June 13, 2024
- WATTS
Table of Contents
WATTS PR03 RF 230 Vision Smart Wireless Plug Receiver
BOX CONTENT
MANUALS
https://wattswater.eu/catalog/regulation-and-control/watts-vision-smart-home /smart-plug-PR03-RF/
|
PACKAGE CONTENTS
OVERVIEWS
Safety warnings and operating instructions
This product should be installed preferably by a qualified professional.
Subject to observation of the above terms, the manufacturer shall assume the
liability for the equipment as provided by legal stipulations.
All instructions in this Quick Installation Guide should be observed when
working with the controller. Failures due to improper installation, improper
use or poor maintenance are voiding manufacturer liability. Any attempt to
repair voids the responsibility and the obligation to guarantee and
replacement from the manufacturer.
CONNECTION
COMPATIBLE THERMOSTATS
Environment:
Operating temperature 0°C to 40°C
Shipping and storage temperature -10°C to +50°C
Thermal safety temperature (relay opening) When > 85°C (back to standard mode
when < 65°C)
Power supply
| 230VAC 50Hz with European plug socket
---|---
Electrical protection|
Cat II – IP20
Output Maximum Load Relay
| Relay 10 A Max 230V 50Hz
Radio Frequency & RF Receiving distance|
868,3 MHz < 10mW (Bidirectional communication) 30m in residential environment (100m in open field)
EU declaration of conformity Hereby, Watts Electronics declares that the equipment is in compliance with the relevant Community harmonization legislation
|
Low voltage (LVD) – Directive 2014/35/EU Electromagnetic compatibility (EMC) – Directive 2014/30/EU Radio equipment – Directive 2014/53/EU Restriction of the use of certain hazardous substances (RoHS) – Directive 2011/65/EU The full text of the EU declaration of conformity is available on wattswater.eu
Product is in compliance with Classification Contribution
|
UE 811/2013 and 2010/30/UE IV 2%
CUSTOMERS SUPPORT
The descriptions and photographs contained in this document are supplied by way of example and illustration only. Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice. Watts hereby objects to any term, different from or additional to Watts terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Watts.
Vision® Wireless wattswater.eu
Watts Electronics S.A.S
B.P. N°10 – Z.A. des Tourettes, 43800 ROSIERES, France,
T: +33(0) 471 57 40 49, F: +33(0) 471 57 40 90,
wattswater.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>