Hartwood HW-PSU12 Multi Pedal Power Supply Instruction Manual

Hartwood HW-PSU12 Multi Pedal Power Supply

WARNING!
Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product No naked flame sources, such as lighted candles, should be placed on the product Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat buildup. The ventillation must not be impeded by covering the appliance with items such as newspapers, table-cloths, curtains etc. The mains plug is used to disconnect the appliance from the mains supply. Ensure that the mains outlet is easily- accessible and remove the plug from the mains outlet if you notice any abnormality with the appliance. Thank you for purchasing the Hartwood Multi Power Supply. To get the most out of your product, please read this manual carefully.

BOX CONTENTS

• 1 x Hartwood Multi Power Supply
• 1 x DC Adapter
• 12 x DC 2.1mm Power Cables
• 1 x Inverse Polarity Cable
• 1 x DC jack to minijack converter cable

FUNCTIONS

1. DC 18V IN
   Connect the included power supply here to power the adapter.

2. POWER OUTPUTS
   Connect your pedals here to the appropriate output using the supplied power cables.

3. 5V2A
   Connect your mobile phone or tablet here using a USB cable (not included) to charge your device.

CONSIDERATIONS

Only use the supplied 18V DC Adapter to connect to the input of the power supply. The HW-PSU12 should only be used to power DC pedals. The polarity of all DC outputs are CENTRE NEGATIVE – Centre positive pedals should only be connected in conjunction with the inverse polarity cable included. Pedal voltage requirements and polarity should be identified before being connected to prevent damage to the pedal. Pedals can be damaged if powered using a voltage that exceeds what is required by the pedal. The total output power across all outputs including the USB charger must not exceed 36W. To calculate the total output power: Calculate the power consumption in Watts (W) for each individual pedal by multiplying the input voltage (V) by the current requirement in Amps (A). (note that 100mA=0.1A) For example, a pedal that requires 9V 50mA will consume 9 x 0.05 = 0.45W. Add the power consumption for all the pedals together.

SHORT CIRCUIT PROTECTION

Each individual output illuminates when the connected pedal is drawing power. The illumination will go out if the pedal or cable develops a short circuit. If this happens, try connecting a different cable and pedal to the same output. If the output reilluminates, this confirms that the original pedal or cable was faulty.

SPECIFICATIONS

• Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V 2.0A
• Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36W
• Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 x 195 x 60mm
• 12 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Outputs 9V DC @ 100mA
  • 2 Outputs 9V DC @ 300mA
  • 2 Outputs 9V DC @ 500mA
  • 1 Output 12V DC @ 300mA
  • 1 Output 18V DC @300mA

CONTACT

• If you have any more questions about this product, please do not hesitate to contact the Gear4music
• Customer Service Team on  +44 (0) 330 365 4444 or
• info@gear4music.com.
• KETTLESTRING LANE
• YORK
• YO30 4XF
• UNITED KINGDOM
• METALLVÄGEN 45A
• 195 72 ROSERSBERG
• STOCKHOLM
• SVERIGE
• LAHNSTRAßE 27
• 45478 MÜLHEIM AN DER RUHR
• DEUTSCHLAND

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>