Hartwood BEARTOOTH Distortion Pedal User Manual

June 12, 2024
Hartwood

Hartwood Logo BEARTOOTH Distortion Pedal
User Manual

BEARTOOTH Distortion Pedal

WARNING!
Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel
Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product
No naked flame sources, such as lighted candles, should be placed on the product Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up. The ventillation must not be impeded by covering the appliance with items such as newspapers, table-cloths, curtains etc.
The mains plug is used to disconnect the appliance from the mains supply. Ensure that the mains outlet is easily-accessible and remove the plug from the mains outlet if you notice any abnormality with the appliance.

Thank you for purchasing the Hartwood Beartooth Distortion Pedal . To get the most out of your product, please read this manual carefully.
BOX CONTENTS

  • 1 x Hartwood Beartooth Distortion Pedal
  • 1 x User Manual

FUNCTIONS

Hartwood BEARTOOTH Distortion Pedal - FUNCTIONS

  1. MODE
    Use this switch to alternate between solo, turbo and normal modes.

  2. VOLUME
    Use this control to increase or decrease the volume of the pedal.

  3. DISTORTION
    Use this control to determine the amount of distortion present in your signal.

  4. OUTPUTJACK
    Use this output to connect the pedal to the input of an additional pedal, or your amplifier.

  5. FOOTSWITCH
    Use this footswitch to engage/disengage the distortion effect.

  6. FILTER
    Use this control to determine the amount of high frequency content present in your tone.

  7. INPUT
    Use this input to connect your instrument.

  8. POWER INPUT
    Connect a regular 9V DC Power Adapter here to power the pedal.

SPECIFICATIONS

Controls Distortion, Filter, Volume
Modes Normal, Solo, Turbo
Input Connection 6 .35mm Mono Jack
Output Connection 6 .35mm Mono Jack
Input Impedance 1M Ohms
Output 1k Ohms
Current Draw 4mA
Power Supply AC Adapter 9V DC, Centre Negative

Hartwood LogoKETTLESTRING LANE/YORK
Y030 4XF
UNITED KINGDOM METALLVAGEN 45A
195 72 ROSERSBERG
STOCKHOLM
SVERIGE LAHNSTRABE 27
45478 MOLHEIM AN DER RUHR
DEUTSCHLAND
If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com

Hartwood BEARTOOTH Distortion Pedal - Icon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals