hama 00201632 Car Charger Instruction Manual

June 13, 2024
Hama

00201632 Car Charger

hamA

Car Charger, 2× USB-C, PD/QC 3.0, 2.0, 45W

Kfz-Ladegerät, 2×USB-C, PD/QC 3.0, 2.0, 45W

Operating Instructions

Thank you for choosing this Hama product!
Take your time and read the following instructions
and information completely.
Please keep these instructions in a safe place for
future reference.

1. Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage

Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.

Note
This symbol is used to indicate additional
information or important notes.

2. Package contents

  • Car charger
  • These operating instructions

3. Safety instructions

  • When using this product, observe the applicable

  • Take care that components such as airbags, safety
    areas, controls, instruments, etc. and visibility are
    not blocked or restricted.

  • Do not allow yourself to be distracted by the
    product when driving a vehicle. Always pay
    attention to the surrounding traffic and your
    environment.

  • Protect the product from dirt, moisture and
    overheating and use it in dry environments only.

  • Do not drop the product and do not expose it to
    any major shocks.

  • Do not operate the product outside the power
    limits specified in the technical data.

  • Do not modify the device in any way. Doing so
    voids the warranty.

  • Do not continue to operate the product if it is
    visibly damaged.

  • Use the product only for the intended purpose.

  • As with all electrical products, this device should
    be kept out of the reach of children.

  • Do not bend or crush the cable.

  • Always pull directly on the plug when
    disconnecting the cable, never on the cable itself.

  • Do not use the product in the immediate vicinity of
    heaters, other heat sources or in direct sunlight.

  • Dispose of packaging material immediately in
    accordance with the locally applicable regulations.

  • Only use the article under moderate climatic
    conditions.

  • Do not use the product in areas in which electronic
    products are not permitted.

  • Do not use the product in a damp environment
    and avoid splashing water.

Risk of electric shock

  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not use the product if the charging cable, adapter cable or power cable is damaged.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Note – 12 V, 24 V vehicle electrical systems

The charger is suitable for 12 V and 24 V vehicle electrical systems.

Warning – connecting devices

  • Before connecting a device, check whether it
    can be adequately supplied with the charger’s
    current capacity.

  • Ensure that the power of the connected device
    does not exceed 45W.

  • Note the instructions in your device’s operating
    manual.

Note – Power Delivery / QC 3.0, 2.0

  • Plug & GO: no additional software required,
    simply plug in and start:
    Thanks to Power Delivery / QC 3.0, 2.0, the
    voltage and power are adjusted automatically.

  • Be aware that, for efficient and optimized
    charging, your terminal device must support the
    PD (Power Delivery)/QC 3.0, 2.0 function.

  • If you have a large number of PD/QC-enabled
    devices with different firmware updates, it may
    be that the function is not fully supported.

Unless different instructions have been expressly
given in the operating instructions for the devices
you are charging, proceed as follows:

  • Connect your device to the charger.

  • Then connect the charger to the on-board
    electrical system’s car socket.

  • The charging process is displayed on your device.

  • Disconnect the device from the charger if you wish
    to interrupt the charging process or when the
    device is fully charged.

  • Then disconnect the charger from the line
    connection.

When charging the rechargeable batteries in the
device, note the maximum charging times for the
built-in batteries.

Note – car battery

With some vehicles, it can happen that power
continues to be supplied even though the ignition
has been switched off. You should therefore
disconnect the product from the line connection
when not in use to protect your car battery from
being drained.

Note
Be aware that if you are charging two devices at
once, the charging current is cut in half and the
charging times will be correspondingly slower.

5. Care and maintenance

  • Only use soft, dry towels to clean the product.

Note
Disconnect the device from the mains before
cleaning and during prolonged periods of
non-use.

6. Technical data

Car charger
Vehicle electrical system voltage 12 V, 24 V

Output voltage / current max.

USB-C:
5.0 VDC/ 3.0A / 15.0W
9.0 VDC/ 2.22A / 20.0W
12.0 VDC/ 1.67A/ 20.0W

USB-C:
5.0 V DC/ 3.0A / 15.0W
9.0 V DC/ 2.77A / 25.0W
3.3 – 5.9 V DC/ 3.0A
/ 9.9 – 17.7W
3.3 – 11.0 V DC/ 2.25A
/ 7.425 – 24.75W

Output power total 45 W max.

7. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.

Hama GmbH & Co KG
86652 Monheim/Germany
Service & Support
www.hama.com
+49 9091 502-0
DG

All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals