speco technologies SPIPC6AM IP 6 Inch Ceiling Speaker with Microphone Installation Guide

speco technologies SPIPC6AM IP 6 Inch Ceiling Speaker with Microphone

Product Information: SPIPC6AM IP 6in Ceiling Speaker with Microphone

The SPIPC6AM IP 6in Ceiling Speaker with Microphone is a reliable and high- quality audio solution designed for public address or sound applications. The speaker is enclosed to ensure long-life indoors.

Introduction

Welcome
Thank you for your choice of Speco Technologies’ SPIPC6AM IP ceiling mount speaker. This unit is designed and manufactured to provide a reliable source for any public address or sound application. The enclosure ensures long-life indoors.

Specifications

• Power Requirements: 12V/DC or Ethernet
• Mounting Diameter: 7.625 inches
• Clearance Requirement: 2.4 inches from the back of the tile tothe ceiling
• Frequency Response: 100Hz ~ 18KHz
• Max Power: 15W
• Sensitivity: 96dB 1W/1M
• Size: 7.9in x 3.5in
• Weight: 2.20Lbs.
• Material: Metal
• Power: PoE or DC12V/24VDC
• Network Interfaces: RJ45, 10BASE-T/100BASE-TX

Installation

1. Insert either a 12V/DC power cable or an ethernet cable to receive power, but never at the same time.
2. For optimal installation, this speaker should be used with Speco Technologies accessories.
3. Cut a 7.625” diameter hole in your ceiling tile.
4. This assembly requires at least 2.4” clearance from the back of the tile to the ceiling. Ensure at least 2.4 inches clearance from the back of the tile to the ceiling.

Mounting Instructions

1. Select areas of the ceiling or wall without obstructions, plumbing, heating/AC apparatus, or electrical wiring.
2. Determine if in-ceiling mounting brackets are needed to support the speaker’s weight. Order appropriate mounting brackets through your distributor.
3. Use the provided cutout guideline and trace the cut area with a pencil on the mounting location.
4. Carefully cut out the traced guideline area, removing a portion of sheetrock or ceiling tile to expose the mounting hole.
5. Run the ethernet cable through the ceiling or wall to the mounting location.
6. Connect the Ethernet wire to the RJ45 terminal.
7. Test the speaker at low volume to ensure a strong connection before the final installation.
8. Place the speaker with easy-mount tabs turned clockwise inward into the mounting hole.
9. Turn screws on the outer rim of the speaker’s face clockwise to clamp down the easy mount tabs on the mounting surface from behind.
10. Securely position/pivot the tweeter in the direction of the listening area.

Operation Instructions

1. After mounting the speaker to the ceiling, ensure that the ethernet cable is connected to a PoE source, such as a recorder or switch.
2. Access the IP speaker settings through a web browser (InternetExplorer 8 and up) via the LAN.
3. The speaker is set to DHCP out of the box. Use Speco AudioManager to find the IP address of the IP speaker.
4. Once the IP speakers populate through Speco Audio Manager, double-click on the IP address of one of the speakers to go directly to the web interface. Use Username: admin and Password:1234.

WARRANTY INFORMATION

Speco Technologies is constantly developing and improving products. We reserve the right to modify product design and specifications without notice and without incurring an obligation. Rev. 3/21/2023. We are not responsible for typographical errors. ©2023 Speco Technologies. All rights reserved. For warranty information, please refer to the provided documentation or contact Speco Technologies.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>