nordlux ETHAN Square Surface Mount Downlight Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
**nordlux ETHAN Square Surface Mount Downlight Instruction Manual
**
Installations
IP20
The lamp should only be installed in areas where direct contact with water
cannot occur.
Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
The lamp is only suitable for connecting directly to the mains.
The mounting instructions must not be discarded.
MAM 50W
Do not exceed the maximum wattage.
IMPORTANT! Always shut off power to the circuit before starting installation
work. In some countries electrical installation work may only be carried out
by a authorized electrical contractor. Contact your local electricity
authority for advice.
General maintenance: Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>