102165 Honda Pioneer Instruction Manual
- June 13, 2024
- Honda
Table of Contents
102165 Honda Pioneer
PRODUCT DESCRIPTION
INSTALLATION INSTRUCTIONS
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
-
If a winch is already installed, the fairlead will need to be removed before installing the front receiver.
NOTE: Fairlead hardware can be discarded as it will not be reused. -
Set front receiver (1) in place and loosely secure to front bumper using bolts (3.1) and nuts (3.3) as shown in Figure 1. NOTE:
The winch Fairlead (if applicable) will be reinstalled in this location over top of front receiver (1) as shown in **Figure 2.
**
- Adjust front receiver (1) to the contour and center of the front bumper and carefully tighten bolts (3.1) and nuts (3.3).
- Using front receiver (1) as a template, drill holes (A) using a 7/16” drill bit as shown in Figures 1 & 2.
- Place receiver backer plate (2) on the back side of the front bumper in hole location (A) and secure the top of front receive (1) using bolts (3.2) and nuts (3.3) as shown in Figure 3. NOTE: Front bumper can be removed if more clearance is needed to access nuts (3.3) in step 5.
- Tighten all hardware evenly
©2023 Copyright Kappers Fabricating, Inc. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>