GOPro Super Suit Dive Housing User Guide
- June 13, 2024
- GoPro
Table of Contents
Dive Housing
ULTRA DURABLE AND
WATERPROOF TO 197’(60M).
USER GUIDE
What’s Included
DIVE HOUSING
Designed for deep sea diving and extreme activities. HOUSING LENS COVER
Protects the housing lens from scratches, dirt and debris. **STANDARD BACKDOOR
- STANDARD BACPAC BACKDOOR
Waterproof backdoors for use with or without a BacPac™ accessory. SKELETON BACKDOOR + SKELETON BACPAC BACKDOOR**
Enable optimal audio capture during low-speed activities, and access to an attached LCD Touch BacPac (sold separately). NOT waterproof.
Opening the Dive Housing
| | |
---|---|---|---
Step 1
Grip the housing with your left hand.| Step 2
Using your right hand, place your thumb to the left side of the arrow and
index finger just below the latch.| Step 3
Pinch your fingers together, sliding the arrow to the right.| Step 4
Use your fingertips to pull the latch upright and unlock it from the housing.
Closing the Dive Housing
| | |
---|---|---|---
Step 1
Place your GoPro inside the housing.| Step 2
Close the housing backdoor.| Step 3
Hook the latch into the groove on the backdoor.| Step 4
Press down on the latch until it locks into place.
Important Safety + Handling Information
WARNING: Failure to properly care for your Dive Housing can result in
leaks that may damage or destroy your camera. Your warranty does not cover
water damage resulting from user error.
CLEANING THE LENS
Clean the housing lens immediately after it comes into contact with anything
that may cause a stain, including ink, makeup, dirt, food or lotion. To clean
the lens, gently wipe it with a soft, damp cloth. Do not use window cleaners,
household cleaners, solvents, alcohol, ammonia or anything abrasive to clean
the lens.
PREVENTING WATER DAMAGE TO YOUR CAMERA
It’s very important to keep the housing’s rubber seal clean. A single hair or
grain of sand can cause the housing to leak and damage your camera. To clean
the seal, remove it from the housing, rinse it in fresh water and shake dry
(drying with a cloth may cause lint to compromise the seal). After using the
housing in salt water, always remember to rinse it with fresh water to prevent
corrosion.
Learn more about GoPro
products at gopro.com
Please Recycle
130-06139-000 REVB
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>