Zumex Versatile Pro Automatic Feed Juicer Instruction Manual
- June 13, 2024
- Zumex
Table of Contents
Versatile Pro Automatic Feed Juicer
Instruction Manual
Versatile Pro
Bottle holder
Assembly instructions-
Bottle holder
Unit assembly instructions
-
Check that all of the components are present and correct:
1 Select the correct holder for the neck of your bottles:
-
Attach the selected holder, inserting it into the stainless steel mount:
1 Push the holder in until the lower tabs clip into the holes of the mount:
Note: Install the bottle holder after
having assembled the machine on the podium.
Bottle holder
Instructions for installation on the machine -
Once the machine has been assembled on the podium, remove the peel buckets.
-
Using the supplied screwdriver, loosen the two screws and washers located on the base of the stainless steel front cover of the machine. Keep the screws.
-
Place the base of the holder over the positioner on the peel hopper and raise it to its vertical position.
-
Screw the screws back into position. Do not use the washers when completing this action.
Zumex Group
Headquarters
Tel. +34 961 301 251
zumex@zumex.com
Zumex UK
Tel. +44 20 3519 1292
zumexuk@zumex.com
Zumex North America
Tel. +1 305 591 0061
zumexusa@zumex.com
Life Essence zumex.com
zumex.com
References
- Zumex Group | Máquinas de zumo | Exprimidoras y licuadoras profesionales
- Material para Hostelería y Comercio - Productos y Maquinaria
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>