SEAFLO SFCBS-300-203 Dual Circuit On-Off Battery Disconnect Switch User Manual
- June 13, 2024
- SEAFLO
Table of Contents
Dual Circuit ON/OFF
Battery Disconnect Switch
SFCBS-300-203
Features
- Switches an isolated battery bank to all loads or combines battery banks to all loads
- Tin-plated copper studs for maximum conductivity and corrosion resistance
- Studs accept 3/8″ (M10) ring terminals
- One-piece terminal stud design never loosens over time
- Isolating cover with three snap-off side pieces protects rear contacts and allows wire access in any direction
Specifications
Cranking Rating: 30 sec.
Intermittent Rating: 5 min.
Continuous Rating: DC Terminal Stud, Tin-Plated Copper
Torque 120 in-lb (13.56 N-m) Cable Size to Meet Ratings” Maximum Voltage
Rating Ignition Protected
Regulatory
- CE, RoHS, ISO 8846
- Meets all American Boat and Yacht Council (ABYC) requirements for battery switches
- Meets UL 1500 and SAE J1171 external ignition protection requirements
- IP66 — protected against powerful water jets
Caution
- Disconnect positive battery terminal before installing.
- Consult electrical professional for proper wiring application.
Installation
- Refer to the latest edition of NFPA 302 and/or ABYC E11 Standard for installation information.
- Attach one 4/0 AWG cable per terminal to meet ratings.
- Battery cable terminals must be attached under nut and lock washer. Torque 120 in-lb (13.56 N-m).
Operation
- Turn all appliances off before turning the battery switch to OFF.
- Do not switch to OFF while engine is running.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>