nordlux 042902 Link Rondie 3-Kit GU10 1M Skinne HVIT Light Rail Instruction Manual

June 13, 2024
nordlux

nordlux 042902 Link Rondie 3-Kit GU10 1M Skinne HVIT Light Rail

nordlux-042902-Link-Rondie-3-Kit-GU10-1M-Skinne-HVIT-Light-Rail-
product

Dimensions

nordlux-042902-Link-Rondie-3-Kit-GU10-1M-Skinne-HVIT-Light-Rail-
fig-1

Power

Power Off

Power On

Wirings

nordlux-042902-Link-Rondie-3-Kit-GU10-1M-Skinne-HVIT-Light-Rail-
fig-4

nordlux-042902-Link-Rondie-3-Kit-GU10-1M-Skinne-HVIT-Light-Rail-
fig-5

  • POWER
    • CONNECTED
  • POWER
    • NOT CONNECTED

MAX LOAD FOR 1 METER RAIL

  • 13 KG

Features

  • IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
  • Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire.
  • The mounting instruction must not be discarded.
  • Do not exceed the maximum wattage.
  • IMPORTANT:  Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice

Disposal

Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.

General maintenance

Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.

Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process, and is what gives Mouth-blown glass its character and organic look. Always clean mouth-blown glass cold.

Nordlux

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals