nuna IXXA Compact and Lightweight Pushchair Instruction Manual
- June 13, 2024
- nuna
Table of Contents
nuna IXXA Compact and Lightweight Pushchair
Product Information
- Model Number: [Model Number]
- Manufactured Date: [Manufactured Date]
Guarantees
Our gear is covered by a custom warranty per product, starting from the day
of purchase. Please keep the proof of purchase, model number, and manufactured
date available when contacting us. For more information, visit our website:
www.nunababy.com and click on the Warranty link on the
homepage.
Contact
For replacement parts, service, or additional warranty questions, please contact our customer service department:
- Email: info@nunababy.com
- Website: www.nunababy.com
- In the United Kingdom: infouk@nunababy.com.
Child Usage Requirements
This stroller seat is suitable for use with children who weigh up to 15kg
or are 3 years old, whichever comes first.
Product Set Up
Open Stroller:
- Rotate the handle up to open the stroller frame (1).
- Pull the seat to open it (2). A click sound means the seat is open.
Switch Seat:
Please switch the seat if needed.
- Press the seat release button (3)-1 and lift the seat up (3)-2.
- Reverse the seat and attach it to the frame (4). A click sound means the seat is attached completely.
Arm Bar:
- Align the arm bar ends with the arm bar mounts and insert until it clicks into place (5). A click sound means the arm bar is assembled completely.
- To remove the arm bar, press the arm bar release buttons (6)-1 and remove the arm bar (6)-2.
Product Use
Securing Your Child:
- Push the top button on the buckle (7)-1 to release the buckle latch and remove the magnetic clips (7)-2. Place your child in the stroller.
- Insert the magnetic clips into the buckle (8).
- Fit the harness snugly to your child by pulling the adjustment straps to tighten (9)-1. Then pull the waist adjustment straps out (9)-2.
Shoulder Harness Position:
1. The upper shoulder harness buckles can be moved up and down for added
adjustment (10). Make sure the harness is adjusted properly and your child is
snugly secured. The space between the child and the shoulder harness should be
about the thickness of one finger.
Canopy:
To open the canopy, pull it toward the front of the seat; to fold, push it
back (11).
Please refer to separate warning booklet before using the product.
Warranty
We have purposely designed our high-quality products so that they can grow with both your child and your family. Because we stand by our product, our gear is covered by a custom warranty per product, starting from the day it was purchased. Please have the proof of purchase, model number and manufactured date available when you contact us.
For warranty information please visit:
www.nunababy.com
Click the “Warranty” link on the homepage.
Contact
For replacement parts, service, or additional warranty questions, please
contact our customer service department.
In the United Kingdom:
NUNA International B.V.
Van der Valk Boumanweg 178 C 2352JD Leiderdorp
The Netherlands.
Child Usage Requirements
This stroller seat is suitable for use with children who meet the following
requirements:
Birth to 15kg or 3 years whichever comes first.
Product Set Up
Open Stroller
- Rotate the handle up to open the stroller frame. (1)
- Pull the seat to open it. (2) A “click” sound means the seat is open.
Switch Seat
Please switch seat if you needed.
- Press the seat release button (3)-1 and lift the seat up (3)-2.
- Reverse the seat, and then attach it to the frame. (4) A “click” sound means the seat is attached completely.
Arm Bar
- Align the arm bar ends with the arm bar mounts, and insert until it clicks into place. (5) A “click” sound means the arm bar is assembled completely.
- To remove the arm bar, press the arm bar release buttons (6)-1 and remove the arm bar (6)-2.
Product Use
Securing Your Child
- Push the top button on the buckle (7)-1 to release the buckle latch and remove the magnetic clips (7)-2. Place your child in the stroller.
- Insert the magnetic clips into the buckle. (8)
- Fit the harness snugly to your child by pulling the adjustment straps to tighten (9)-1. Then pull the waist adjustment straps out (9)-2.
Shoulder Harness Position
- The upper shoulder harness buckles can be moved up and down for added adjustment. (10)
Make sure the harness is adjusted properly and your child is snugly secured. The space between the child and the shoulder harness should be about the thickness of one finger.
Canopy
- To open the canopy, pull the canopy toward the front of the seat, and to fold, push it back. (11)
- Open the zipper on the canopy for extra shade. (12)
Calf Support
The calf support has 3 use positions.
- To raise calf support, push the calf support from position 1 to position 3. (13)
- To lower calf support, press two adjustment buttons on the bottom of the calf support (14)-1, and rotate the calf support downwards. (14)-2
Recline
There are 4 recline positions for the backrest.
- To raise or lower the backrest, squeeze the recline adjustment button (15)-1, and pull the backrest up or down (15)-2.
- Please do not press the button (15)-3 on the middle of the recline adjustment button when adjusting the angle for the recline. USE the most reclined position for new born babies.
Brake
- To lock wheels, step the rear end of the brake lever downwards. (16)
- To release wheels, step the front end of the brake lever downwards. (17)
Fold
The stroller can be folded with a forward-facing seat or rear facing seat or
without the seat.
- Fold the canopy. (18)
- Press the folding release button (18)-1 on the middle of the recline adjustment button and then squeeze the recline adjustment button (18)-2.
- Fold the seat. (19)
- Pull the folding webbing of the seat to fold the stroller. (20)
- The stroller can stand after folded. (21)
- Fold the stroller without seat on it, press the folding buttons of the seat mounts. (22) The stroller frame can stand after folded. (23)
Insert
- To assemble the insert, place the insert over the seat, then thread the shoulder and waist harnesses through their respective slots. (24)
Shoulder Harness Cover and Crotch Harness Cover
- The shoulder harness cover or crotch harness cover can be removed from the webbing. To assemble shoulder harness cover and crotch harness cover in reverse steps. (25) – (27)
Accessories
Not all accessories are included on some models.
Post Adaptors
For Nuna infant carrier and TRIV series carry cot assembly and usage, please refer to the infant carrier and carry cot instruction manual.
- To attach the post adapters, place the post adapters on the seat mounts. A “click” sound means the post adapters are attached. (28)
- To attach infant carrier, place the infant carrier on the post adapters. A “click” sound means the infant carrier is attached. (29)
- To attach carry cot, place the carry cot on the post adapters. A “click” sound means the carry cot is attached. (30)
- The infant carrier and carry cot angle can be adjusted with our adjustable adaptors. (31)
- When used with rear facing, the letters on the post adaptors are the same as those on the frame plastic. (32)
- When used with front facing, the letters on the post adaptors are opposite to those on the frame plastic. (33)
- To remove the infant carrier, push the release buttons on the infant carrier (34)-1 and lift up (34)-2.
- To remove carry cot, press the release buttons on the side of the carry cot (35)-1 and lift up (35)-2.
- To remove the post adapters, press the adapter release buttons (36)-1 and lift up (36)-2.
Fold the Stroller with Post Adapters
- Pull the folding webbing of the post adapters to fold the stroller. (37)
IXXA Rain Cover
Check that the canopy is completely open before attaching the rain cover.
- To assemble the rain cover, place it over the pushchair. (38)
Detach & Assemble Soft Goods
To detach seat soft goods, follow steps (39) – (45) as shown, and to re- assemble seat soft goods, follow the steps above in reverse.
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp cloth, but do not use abrasives or bleach. Do not use silicon lubricants as they will attract dirt and grime. Do not store your stroller in a damp place.
- Clean the stroller wheels regularly with water and remove any dirt.
- To ensure long-lasting use, wipe the stroller off with a soft, absorbent cloth after using it in rainy weather.
- Refer to the care label attached to the soft goods for washing and drying instructions.
- It is normal for fabric to color from sunlight and to show wear and tear after a long period of use, even when used normally.
- For reasons of safety, only use original Nuna parts.
- Check regularly if everything functions properly. If any parts are torn, broken, or missing, stop using this product.
Parts List
Make sure all parts are available before assembly.
If any part is missing, please contact local retailer. No tools are required for assembly.
- Stroller Frame
- Canopy
- Seat Pad
- Arm Bar
- Calf Support
- Front Wheel (x2)
- Rear Wheel (x2)
- Storage Basket
- Calf Support Adjustment Button
- Seat Release Button
- Buckle
- Shoulder Harness Pad
- Insert
- Handle
- Brake Lever
- Folding Webbing
- Recline Adjustment Button
- Folding Release Button
- Post Adapters
- Rain Cover
NUNA International B.V. Nuna and all associated logos are trademarks.
Contact
For replacement parts, service, or additional warranty questions, please
contact our customer service department.
In the United Kingdom:
NUNA International B.V.
Van der Valk Boumanweg 178 C 2352JD Leiderdorp
The Netherlands.
References
- Nuna | Premium Car Seats, Strollers, and Baby Gear
- 에이원 고객서비스
- Nuna | Functional Car Seats, Premium Strollers & Baby Gear
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>