speco technologies SPIPC6AM IP Horn Speaker User Guide
- June 13, 2024
- speco technologies
Table of Contents
speco technologies SPIPC6AM IP Horn Speaker
Quick Start Guide
- SPIPH8A- IP 15W Horn Speaker
- SPIPC6AM- 6” IP 15W Ceiling mount speaker with microphone
- SPIPC6A- 6” IP 15W Ceiling mount speaker without microphone
Features
- Compatible with both SecureGuard® VMS & SecureGuard® CMS
- All Speco IP Speakers are PoE (no local power supply needed)
- Supports prerecorded messages, scheduling, HTTP, and Alarm in.
- Compatible with VOIP SPIP devices
- Compatible with Speco Audio Manager
| Model | SPIPC6AM | SPIPC6A | SPIPH8A |
|---|---|---|---|
| Protocol | SIP, ONVIF, HTTP, IPv4, DHCP, RTSP, RTP, RTCP, TCP, UDP, ARP, |
FTP, TFTP, NFS, NTP
Codec| OPUS 48 kHz, MP3 44.1 kHz, G.722 ADPCM 16 kHz, G.711 PCMU 8 kHz,
G.711 PCMA 8 kHz
Network Interfaces| RJ45, 10 BASE-T/100BASE-TX
Power| PoE or DC 12V/24VDC
Rated Power| 15W| 15W| 15W
Max SPL| 96dB| 96dB| 113dB
Frequency Response| 100HZ~18KHz| 100HZ~18KHz| 300HZ~8KHz
Type| Ceiling Mount| Ceiling Mount| Horn
Material| Metal| Metal| ABS (IP67)
Weight| 2.20Lbs.| 2.20Lbs.| 2.87Lbs.
Size| 20090mm| 20090mm| 225165240mm
Microphone| Yes| No| No
Hardware Interface
Every Speco IP speaker will have 3 input connections that can be made:
- Alarm input connection
- PoE connection
- DC power Connection
- Please use either the PoE connection or the DC power connection, but not both at the same time. Both will cause damage to the IP speaker.`
Finding the IP address of the IP Speaker
- Download Speco Audio Manager from Specotech.com.
- This can be found under the support tab at Specotech.com.
- Extract the zip-file and run the exe for Speco Audio Manager on your computer.
- Put the Speco Audio Manager shortcut on to your desktop/laptop.
- Lastly run Speco Audio Manager and click on scan device. This will find every Speco IP speaker on the network.
Logging into the IP Speaker
- Through the Speco Audio Manager if you double click on one of the speakers IP addresses it will direct you to the web interface of that IP speaker.
- Every Speco IP speaker will have the same default username & password.
- Click on “Sign in” to log into the IP speaker.
Username: admin | Password: 1234
Navigating the Web Interface
Once logged into the IP speaker there will be eleven tabs to choose from. The following tabs will have the ability to:
- Status- View the devices information. This includes the time, firmware, SIP accounts, Space available, and Network status.
- Basic- Set the network parameters and set the Date & Time.
- ONVIF- Enable ONVIF. It will be enabled by default.
- SIP Account- Create two SIP accounts in the IP speaker.
- Audio- You can enable or disable audio codecs, increase/decrease volume of the IP speaker, and enable/disable the microphone if the IP speaker has one.
- Media File- Choose from 5 preset bell files or add up to 10 mp3 files.
- Alarm- Enable the Alarm output and set the audio file to play.
- Schedule- create up to 10 different schedules.
- RTP Multicast- create up to 10 different RTP addresses and set the priority for each.
- Firewall- Set any firewall rules in the IP speaker.
- System- Reboot, reset, or upgrade the IP speaker. You can also change the username and password of the IP speaker here.
Speco Technologies is constantly developing and improving products. We reserve the right to modify product design and specifications without notice and without incurring an obligation. Rev. 3/21/2023. We are not responsible for typographical errors. ©2023 Speco Technologies. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>