Moes ZS-EUD1-WH-MS Dimmable Touch Switch Instruction Manual

Moes ZS-EUD1-WH-MS Dimmable Touch Switch

Product Information

This is a dimmable touch switch designed with ZigBee protocol to replace traditional dimmable switches. It comes in 1/2/3 gang  options and requires a ZigBee hub for normal use. The switch has a multi-control association feature that allows it to work with other smart switches without any interference. It is suitable for different decoration styles and offers the best value.

The switch has the following technical parameters:

• Model: WS-EU(US)D;ZS-EU(US)D
• Working Voltage: 90-250V AC 50/60Hz
• Max. Load: Total 600W
• Protocol: Wi-Fi 2.4GHz/ZigBee 3.0/BLE
• Working Frequency: 2.4G
• Wireless Distance (outdoor): 20-30M

Please note that this switch must use a TRIAC dimming driver to adjust the brightness of the LED light.

Product Usage Instructions

1. Installation:
2. Turn off the circuit breaker and use an electrical tester to test the power. Ensure the circuit breaker is off before wiring. Disconnect the power supply before installing or removing the device to avoid damage.
3. Remove the old switch and identify the Line/Load Wire. Verify power is off by testing all wires connected to the switch.
4. Take pictures of the wiring and follow the wiring diagram to connect the switch wires to the wires in the wall box.
5. Mount the switch with the provided screws and snap the wall plate on it.
6. Open the switch panel from the bottom using a screwdriver.
7. Turn the power back on at the circuit breaker and then switch the light on.
8. Add Devices:
9. Download the Smart Life App from the App store.
10. Register or log in to the Smart Life App using your phone number and verification code.
11. Configure the app to the switch by ensuring the switch has electricity and your mobile and ZigBee gateway hub are connected to the same 2.4GHz WiFi network.
12. Manual Operation:

Press the button once on the switch to turn the light on/off slowly. Long press the button to dim up slowly, release, and long  press again to dim down slowly.

Product Description

This new designed smart switch with 1/2/3 gang optional is designed with ZigBee protocol to replace traditional dimmable switches with a variety of ways to control. ZigBee hub is required for normal use. Now one new smart feature as multi-control association to other smart switches is added into Smart Life/Tuya App,and all controlling modes work without any interference. Its design is suitable for different decoration styles with its best value.

Safety Information

Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician.

Technical Parameters:

• Model: WS-EU(US)D;ZS-EU(US)D
• Working Voltage: 90-250V AC 50/60Hz
• Max. Load: Total 600W
• Protocol: Wi-Fi 2.4GHz/ZigBee 3.0/BLE
• Working Frequency: 2.4G
• Wireless Distance(outdoor): 20-30M

Warnings:
Please note that this switch must use a TRIAC dimming driver to adjust the brightness of the LED light!

Installation

Note:

• Make sure that the power at the circuit breaker is off before wiring.
• Neutral Wire is required.Confirm the wall box contains a Neutral Wire(typically white).If the wall box don’t have a Neutral Wire, please try another location at your home or call a professional electrician to install the switch.
• The wire colors indicated in this manual are the usual colors and may differ in some houses.
• Ensure the wire conductors are securely fastened to each wire.
• Ensure the Wi-Fi signal is steady and normally working before wiring and your mobile and Zigbee gataway hub are under the same 2.4GHz WiFi network.
• If you don’t have any wiring experience, please call a professional electrician.

Step 1

• Turn off the circuit breaker and use the electrical tester to test the power.
• Ensure the circuit breaker is off before wiring.

Attention:

• Please disconnect the power supply before installing or removing the device for avoiding irreversible damage on the device from the electric current or some unpredictable problems such as lamp flashing.

Step 2

• Remove the old switch

Step 3

• Remove the switch and pull it away from the wall. Identify Line/Load Wire(Note:The color of your wire may be different from the color shown on the manual.)

Verify power is off

• We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
• You may need to turn off more than one circuit breaker.

Step 4

• Take pictures of the wiring

Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors.

Step 5

• Open the switch panel from the bottom of the switch with a screwdriver

Mount the switch with the provided screws and snap the wall plate on it.

Step 6

• Turn the power back on at the circuit breaker and then switch the light on.

Manual Operation:

• Press the button once on the switch and the light will turn on/off slowly. Long press the button and the light will dim up slowly, then release before long pressing again to dim down slowly.

Add Devices

Download Smart Life App

Please scan the QR code or download Smart Life on App store.

Registration or Log in

• Download “Smart Life”Application
• Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get verification code and “Set password”.
• Choose “Log in” if you already have a Smart Life account.

Configure the APP to the switch
Preparation: Ensure the switch has been connected with electricity; ensure your mobile and ZigBee gateway hub are under the same 2.4GHz WiFi network.

Note:

• If you have connected 5G network, please disconnect 5G network firstly and connect 2.4G network.

ZigBee link method 1:
Scan the QR code to configure the network guide.

ZigBee link method 2:

• Re-pair and clear up the ZigBee code

• Press the switch button for 6 times, and hold on the 6th time, then release until the blue indicator flashing fast.

• Reset/re-pair is successful.

• Open the App, select “+” on top right,choose “Auto Scan” to add device. And select the right Gateway to confirm the connection.

Note:
Make sure you have successfully connected one ZigBee gateway hub.

• Confirm the ZigBee dimmer switch blue indicator is flash fast(twice a second).

• When pairing is done, the ZigBee dimmer switch will be shown on the App.

Wi-Fi link method:

• Pair and clear up the Wi-Fi code
• Re-pair and clear up the Wi-Fi code
• Press the switch button for 6 times, and hold on the 6th time, then release until the blue indicator flashing fast.
• Reset/re-pair is successful.

1. Make sure your phone is connected to Wi-Fi and Bluetooth.

2. Open Smart Life/Tuya App and Click“+”,then the prompt page will automatically show on the screen. Click “Go to add”.

3. Select the device you want to add and click “Add”

4. Enter Wi-Fi Password and click “Confirm”, waiting for completing the connection.

5. Add the device successfully, you can edit the name of the device to enter the device page by click “Done”

Precautions

Please confirm the load of lamps before installation, we take no responsibility if it is damaged because of over loaded.

Disclaimer: We take no responsibility for casualty because of improper line connecting. If upgrading the product on software, you can contact with our company, the company reverses the right to interpret the regulation.

Enter Smart Life Skill in Alexa APP

1. Complete product networking configuration in the App
   Complete the device’s networking configuration according to the prompts in the App.
   Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as “bed light”.

2. Configure the Amazon Echo device
   (If you have already configured Amazon Echo, you can skip this step. The following instructions are based on the iOS client.)
   Make sure you Amazon Echo device is powered on and connected to a Wi-Fi network.
   Open the Alexa App on your phone. After successful login, tap on the menu in the upper left corner of the Home page, select “Settings” and tap “Set Up A New Device” to set up the Amazon Echo.
   Choose your Amazon Echo device type and language for connecting. Press and hold the small dot on the device until the light turns yellow. Then tap “Continue” to connect to the hotspot.
   After connecting to the Amazon Echo hotspot, return to the page. At this point, the connection is successful.
   
   Tap “Continue” to proceed to the next step. Choose a Wi-Fi network to connect to. Amazon Echo will take a few minutes to try to connect to the network.
   After the network connection is successful, tap
   “Continue”. An introduction video will appear. After the video ends, tap “Continue” to jump to the Alexa Home page. You have now completed the Amazon Echo’s configuration process.

3. Key step —— Link Skill
   Tap on “Skills” in the Alexa App menu.

4. Then search for “App Name”. Tap “Enable” to enable the Skill.

5. Enter the App account and password, then tap “Link Now” to link your App account to enable the Skill. Now you can start your smart home journey.

6. Common commands
   Control the device via voice commands, now you can control your smart device with Echo. You can control your device (such as your bedroom light) with the following commands:
   Alexa, turn on/off bedroom light. (Turn on/off the light)
   Alexa, set bedroom light to 50 percent. (Set the light to any brightness)
   Alexa, brighten/dim bedroom light. (Increase/weaken the brightness of the light)
   Alexa, set bedroom light to green. (Adjust the color of the light)

SERVICE

1.  During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
2. Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty
3. Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party
4. Please keep this warranty card to ensure your rights
5. Our company may update or change the products without notice. Please refer to the official website for the updates.

RECYCLING INFORMATION

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these  collection points are and how they work, contact the installer or your local authority.

WARRANTY CARD
Product Information

• Product Name____
• Product Type_____
• Purchase
• date____
• Warranty Period___
• Dealer
• Information_____
• Customer’s Name_____
• Customer
• Phone__
• Customer Address_____ __

Maintenance Records

Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
If you have any other need, please do not hesitate to contact us first, we will try to meet your demand.

• FB: @moessmart
• Youtube: MOES.Official
• Twitter: @moes_smart
• Insta: @moes_smart
• TikTok: @moes_smart
• Website: www.moeshouse.com

WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel:+86-577-57186815
Email:[email protected]
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China

References

• MOES Smart: Create Your Smart Life With Smart Home Devices

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>