ETNA RA345 Cooker Hood Instruction Manual

ETNA RA345 Cooker Hood

Product Information

The product is an extractor hood for use in kitchens. It comes with different language versions of the user manual, including Dutch (NL), French (FR), German (DE), and English (EN).

The user manual provides information on the installation, use, maintenance, and environmental aspects of the product. It also includes a description of the product and its features.

The product features include:

• Extraction level LED indication
• Grease filter
• Lighting
• On/off button for lighting
• (+) button for increasing extraction capacity)
• (-) button for decreasing extraction capacity)
• On/off button for extraction

Product Usage Instructions

Operation

To operate the extractor hood, you can use the remote control. The LED indication on the remote control shows the different extraction speeds: green for the 1st speed, orange for the 2nd speed, red for the 3rd speed, and red blinking for the 4th speed (maximum 7 minutes, then it returns to the 3rd speed ).

To increase the extraction speed, press the “+” button. To decrease the extraction speed, press the “-” button.

To turn the lighting on or off, press the on/off button for lighting.

Pairing the remote control with the extractor hood

1. Make sure the extractor hood is not connected to power by switching off the circuit breaker in the meter cupboard or using the On/Off switch on the top of the hood.
2. Reconnect the extractor hood to power by switching on the circuit breaker or using the On/Off switch.
3. Within 5 seconds, press the lighting button on the remote control to turn on the light.
4. Within 5 seconds, press the on/off button for extraction. Wait at least 10 seconds before using the extractor hood.
5. If you need to replace the remote control, repeat the steps for pairing the remote control.

Setting a new code for the extractor hood

1. Press and hold the (-) and (+) buttons on the remote control for at least 10 seconds. The LED on the remote control will turn on.
2. Within 3 seconds, press the (-) and (+) buttons simultaneously again. The LED on the remote control will blink 3 times.
3. Follow the steps for pairing the remote control.

Replacing the battery

To replace the battery, remove the cover of the remote control and replace the battery with the same type and voltage. Dispose of the old battery properly according to government regulations.

Introduction

• Reading through these instructions for use will help you quickly find information about all the options you are offered by this appliance. It contains information for your safety and about the maintenance of the appliance.
• Read the separate safety instructions before using the appliance!
• Keep the instructions for use and the installation instructions.
• They will be of value to any later user of this appliance.
• You can find the most recent version of the instructions for use on our website.

Description

1. Extraction speeds LED indication
2. Grease filter
3. Lighting
4. Lighting on/off key
5. (+) increase extraction power key
6. (-) decrease extraction power key
7. Extraction on/off key

Operation

Remote control

Switching the fan on and off

1. Touch the extraction on/off key.
   • The cooker hood switches on at speed 1.
   • The indicator on the cooker hood shows the selected speed:
   • green = speed 1;
   • orange = speed 2;
   • red = speed 3;
   • red, flashing = speed 4 (maximum of 7 minutes, after which the speed switches back to speed 3).
2. If so required, select a higher speed using the ‘+’ key.
3. Select a lower speed using the ‘-’ key.

Switching the lighting on and off

1. Touch the lighting on/off key.
   • The light turns on.
   • Touch the on/off key again to switch the lighting off.

Linking the remote control to the cooker hood

1. Disconnect the cooker hood from the power supply by setting the group fuse in the meter cupboard to ‘0’ or removing the fuse from the fuse holder. If present, the cooker hood can also be disconnected from the power supply with the On / Off switch located at the top of the cooker hood.
2. Reconnect the cooker hood to the mains by setting the group fuse to ‘1’ or placing this in the fuse holder.
3. Within 5 seconds, touch the lighting key until the lighting is on.
4. Within 5 seconds, touch the extraction on/off key.
   • Wait at least 10 seconds before you using the cooker hood.
   • If the remote control is replaced, repeat the steps for linking the remote control. If present, the cooker hood can be connected to the power supply with the On/Off switch located at the top of the cooker hood.

Entering a new code for the cooker hood
When interference prevents the remote control from working properly, a new code can be entered.

• Touch the remote control’s (-) and (+) keys simultaneously for at least 10 seconds.
  ▷ The LED on the remote control lights.

• Once again, touch the (-) and (+) keys simultaneously within3 seconds.
  ▷ The LED on the remote control flashes 3x.

• Work through the steps for linking the remote control.

Replacing the battery

Remove the remote control’s cover and replace the battery with a battery of the same type and voltage. The battery is chemical waste and must be disposed of in a responsible manner and in accordance with government regulations.

MAINTENANCE

Cleaning

Note!
Before carrying out maintenance work, always disconnect the cooker hood from the power supply by setting the group fuse in the meter cupboard to ‘0’ or removing the fuse. If present, the cooker hood can also be disconnected from the power supply with the On / Off switch located at the top of the cooker hood.
The inside and outside of the cooker hood must be cleaned at regular intervals. Do not use abrasive products. Do not clean with alcohol!
Note!
Failure to follow these instructions for cleaning the appliance and replacing the filters can result in fire. Always follow these instructions! The manufacturer is not liable for damage to the hood or damage caused by a fire that is due to inexpert maintenance or the failure to follow the aforementioned recommendations and the safety instructions supplied with the appliance.
Clean the cooker hood with a soft cloth with water and a little detergent. Then wipe with clean water. Do not use corrosive cleaning agents such as soda, and do not use scouring sponges or similar. Treat with a product designed for the maintenance of stainless steel and polish in the direction of the surface finish of the stainless steel.

Metal grease filters

Metal filters must be cleaned once per month (or when the filter cleaning indicator – if present on the model – indicates that this is necessary). Clean the filters with neutral cleaning agents, by hand or in the dishwasher at low temperatures and with a short program. Put the grease filters in the dishwasher with the openings facing down so that the water can drain. Aluminum grease filters will become dull from the cleaning agents in the dishwasher. This is normal and does not affect the performance.
The saturation of the filter depends on the intensity of use, the manner of cooking, and the regularity with which the grease filters are cleaned.

Grease filters

Clean the grease filter at least once a month. Cleaning will result in the aluminium parts of the filters becoming dull due to the use of cleaning agents, in particular when cleaned in a dishwasher.
This is normal and is not covered by the warranty.

Removing the grease filter

1. Switch off the cooker hood.
2. Pull the handle of the grease filter towards you and tilt the front downwards.

Important:
Prevent the filter from falling on your hob by supporting it during insertion and removal.

Odor filter

• Remove the grease filter.
• Mount the odor filter.

Important:
The odor filter is clamped between the body and the grease filter. Prevent the filter from falling on your hob by supporting it during insertion and removal.

• Fit the grease filter.

Important:

• The saturation of the filter depends on the intensity of use, the manner of cooking and the regularity with which the grease filters are cleaned.
• The odor filter must be replaced at least once every four months.
• Odor filters cannot be washed for reuse. Saturated carbon is not environmentally friendly, so replace the filter in time.

Long-life filter (made of green plastic)
As a replacement odor filter, you can opt for a long-life filter, recognizable by the green plastic. This filter must be cleaned every 4 months.

1. The filters can be washed by hand or in the dishwasher at a maximum temperature of 65 °C. The washing cycle must be done without other dishes and without dishwasher detergent. Do not use any cleaning agents!
2. Remove excess water. Be careful to avoid damaging the filter. Place the filter in the oven to dry for at least 1 hour at a maximum temperature of 80 °C. After 4 times of use (or if the filtres are damaged), the filters will need to be replaced.

Lighting

• This hood is fitted with a light system. This light system has to be replaced by an authorized technician. Do not attempt to replace it by yourself.
• The lamp in this household appliance is only suitable for illumination of this appliance. The lamp is not suitable for household room illumination.

INSTALLATION

General

This appliance must be connected to the mains by a recognized installer who is familiar with and works in accordance with the applicable safety regulations. This appliance meets the requirements of European regulations.

Important information:

• The lowest part of the cooker hood must be at least 65 cm above the cooking surface of the hob.
• Take account of local regulations governing the ventilation of gas appliances.
• Before drilling holes, check to make sure that there are no wires in the area.
• The installation material supplied with this cooker hood is suitable for fastening to concrete and reinforced concrete ceilings.

Electrical connection

This appliance must be plugged into an earthed wall socket.
Check to make sure that the voltage specified on the type plate matches the mains voltage. The appliance must be connected to the mains as follows:
BROWN = L (live)
BLUE = N (neutral)
GREEN/YELLOW = Earth

Note:
When you wish to make a fixed connection to the mains, you must make sure that a multipolar switch with a break contact distance of at least 3 mm is fitted in the power cable.

Mounting the cooker hood

ENVIRONMENTAL ASPECTS

Disposal of packaging and appliance

This appliance is made from sustainable materials. This appliance must be disposed of in a responsible manner at the end of its service life. Contact the local authorities for information about the method.
The packaging of the appliance is recyclable. The following materials may have been used:

• cardboard;
• polyethylene foil (PE);
• CFK-free polystyrene (PS-hard foam).

These materials must be disposed of in a responsible manner and in accordance with government regulations.
The appliance is marked with a crossed-out wheeled bin symbol to draw your attention to the requirement for the separate disposal of domestic electrical appliances. This means that the appliance may not be disposed of in unsorted household waste
at the end of its service life. The appliance must be taken to a special municipal waste processing location for separated waste or to a dealer who provides this service.
Collecting and disposing of domestic appliances separately avoids detrimental consequences for humans and the environment. This ensures that the materials used to make the appliance
can be recovered and substantial savings in the use of energy and raw materials can be achieved.

Declaration of conformity
We hereby declare that our products conform to the applicable European Directives, Regulations, and requirements, as well as all requirements in the standards to which reference is made.

References

• ETNA Keukenapparatuur - Maakt kwaliteit betaalbaar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>