Shark UV580 Manual: Important Safety Instructions & FAQs

The Shark UV580 Performance Corded UltraLight Vacuum is a powerful and versatile cleaning tool that can help keep your home clean and tidy. However, it’s important to use the vacuum safely and properly to avoid any accidents or damage. That’s why the Shark UV580 Manual includes a list of important safety instructions and FAQs that users should read before using the vacuum. The manual covers a wide range of topics, including inspecting the power cord, using identical replacement parts, and avoiding certain types of debris. Additionally, the manual provides detailed instructions for assembling and using the vacuum, including how to switch between different cleaning modes and how to store the vacuum when not in use. Whether you’re new to using a vacuum or you’re an experienced user, the Shark UV580 Manual is an essential resource that can help you get the most out of your Shark UV580 Performance Corded UltraLight Vacuum.

Shark UV580 Performance Corded UltraLight Vacuum User Manual

MODEL: UV580 OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of fire, electric shock, injury, or property damage, when using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM 1. Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks. To minimize the risk of power cord damage, do not allow the motorized brush roll to ingest the cord. If this occurs, immediately shut off power to the vacuum and remove the cord. 2. This appliance has a polarized plug, if the plug does not fit fully into the outlet, reverse the plug (one blade is wider than the other). If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. 3. Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present risk to the user. 4. Use only identical replacement parts. 5. Carefully observe and follow the instructions provided below to avoid improper use of the appliance. DO NOT use the vacuum for any purpose other than those described in this manual. 6. Before use, carefully inspect all parts for any damage. DO NOT use if any parts are damaged. 7. The use of an extension cord is NOT recommended. 8. This vacuum cleaner contains no serviceable parts. 9. This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children. Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. DO NOT allow to be used as a toy. Close supervision is necessary when used near children. 10. Always turn off the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories. 11. DO NOT handle plug or vacuum cleaner with wet hands. 12. DO NOT use without filters in place. 13. Only use Shark® branded filters and accessories. 14. DO NOT damage the power cord: a) DO NOT pull or carry vacuum cleaner by the cord or use the cord as a handle. b) D O NOT unplug by pulling on cord. Grasp the plug, not the cord. c) DO NOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces. 15. DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow. 16. DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet. Remove all obstructions before you plug in and turn on the unit again. 17. Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing. 18. DO NOT use if vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water. 19. Use extra care when cleaning on stairs. 20. DO NOT leave the vacuum cleaner unattended while plugged in. 21. When powered on, keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers. 22. DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables. 23. Your Shark® vacuum may not be designed to stand up on its own. When taking a break from cleaning, you may need to lean it against furniture or a wall, or lay it flat on the floor. Using the vacuum for an application where the unit lacks stability may result in personal injury. 24. DO NOT use to pick up: a) Liquids b) Large objects c) Hard or sharp objects (glass, nails, screws, or coins) d) Large quantities of dust (drywall dust, fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection. e) Smoking or burning objects (hot coals, cigarette butts, or matches) f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene) g) Toxic materials (chlorine bleach, ammonia, or drain cleaner) 25. DO NOT use in the following areas: a) Poorly lit areas b) Wet or damp surfaces c) Outdoor areas d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust) 26. Turn off all controls before plugging in or unplugging the vacuum. 27. Unplug from electrical outlet when not in use and before any maintenance or cleaning. 28. Hand wash with water only. Washing with cleaning chemicals could damage the unit. 29. During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brushroll. 30. Allow all filters to air-dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts. 31. Make sure the dust cup and all filters are in place after routine maintenance. 32. I f provided, secure the power cord around the two cord hooks during storage.

SAVE THESE INSTRUCTIONS

…………………………………………..

ASSEMBLY

1. Insert Wand into Floor Nozzle. 2. Insert Handheld Vacuum into wand. 3. Snap the Onboard Storage Clip onto the wand, then place accessories in the holder. Ensure all connections click securely into place. 4. For compact storage, hang the handheld vacuum from the Storage Hook on the wand.

SETTINGS

CONTROLS: The control panel is located on top of the handheld vacuum. POWER BUTTON: Power Button Press the Power button to begin vacuuming. Press again to turn off power. Press the FLOOR TYPE button to toggle between Bare Floor and Carpet settings. BARE FLOOR SETTING: Bare Floor/Small Area Rugs When powered on, the vacuum will be in Bare Floor setting. In this setting, the brushrolls spin slowly to clean bare floors and small area rugs. CARPET SETTING: Carpet Press the FLOOR TYPE button to switch to Carpet setting. The brushrolls spin faster to pick up debris below the surface of your carpets. NOTE : Press the FLOOR TYPE button to toggle between Bare Floor and Carpet settings. NOTE : For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use the Carpet setting. NOTE : Select Carpet for stuck-on dust and debris.

CLEANING MODES

FLOOR MODE: To clean floors, step on floor nozzle and tilt handheld vacuum back. ABOVE-FLOOR WITH WAND: For more reach, detach the wand. Stand the vacuum upright, step on the Foot Pedal on the side of the nozzle, and pull up the wand to detach. ABOVE-FLOOR HANDHELD: To detach the handheld vacuum, press the Wand Release button and lift the handheld vacuum off the wand. Great for cleaning stairs, furniture, and countertops. STAIR CLEANING: To clean stairs or other narrow spaces, attach the handheld vacuum to the floor nozzle. NOTE : All accessories are compatible with both the wand and the handheld vacuum.

STORAGE MODE

HANDHELD STORAGE HOOK

Press the Wand Release button near the top of the wand to detach the handheld vacuum. Align the Catch on the side of the handheld vacuum with the Storage Hook on the wand, then hang the handheld vacuum from the hook. Wrap the cord around the two cord hooks. Start with the top hook, and leave a little slack in the cord.

AVAILABLE ACCESSORIES

NOTE : Not all accessories come with all units. For a list of the accessories included with this model, see the top inside flap of the box. To order additional accessories, visit sharkaccessories.com.

A. Crevice Tool This slim tool is great for cleaning in tight spaces, between couch cushions, and in hard-to-reach areas. A longer crevice tool is available at sharkaccessories.com.|
---|---
B. Pet Crevice Tool This versatile, slender 8″ tool removes pet hair from hard-to-reach spaces like corners, stairs, and between couch cushions.|
C. Upholstery Tool Picks up pet hair, dust, and large debris from mattresses, couches, curtains, and other delicate upholstered fabrics.|
D. Dusting Brush This brush dusts and cleans delicate surfaces. Great for use on fans, blinds, lampshades, and keyboards.|
E. Pet Multi-Tool A single convertible tool for cleaning tough pet messes two ways: use the stiff bristle brush to clean stuck-on debris, or take off the bristles to reveal an upholstery tool perfect for removing stubborn pet hair and large piles of debris.|
F. Duster Crevice Tool Two cleaning tools in one. The crevice tool gives you extended reach to clean in tight spaces, while the soft brush is ideal for dusting delicate surfaces.|
G. Anti-Allergen Dust Brush This brush features nylon fiber bristles specifically designed for removing fine dust and allergen particles from the most delicate surfaces.|
H. Self-Cleaning Pet Power Brush Tackles pet hair and ground-in dirt from abovefloor areas like carpeted stairs and upholstery, while actively removing hair wrap as it cleans.|
I. Precision Duster This flexible tube features a micro-duster crevice tool on the end for cleaning around delicate objects and in difficult-to-reach spots like car interiors and computer keyboards.|
J. Under-Appliance Wand Clean under and behind hard-to-move appliances and furniture with this adjustable 36″ tool. Flip the extension piece over to clean the underside of appliances.|
K. Onboard Storage Clip This removable clip attaches to your vacuum. The clip can store up to two accessories at a time while you clean.|
L. Accessory Bag (Large, 32 cm x 70 cm) This convenient accessory storage bag measures 32 cm x 70 cm and fits the Under- Appliance Wand. Smaller size available at sharkaccessories.com|

MAINTENANCE

IMPORTANT : Unplug the vacuum before performing any maintenance.

EMPTYING THE DUST CUP

Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup reaches the MAX fill line. Press the Wand Release button and lift off the handheld vacuum. To remove the dust cup from the handheld vacuum, press the two Dust Cup Release buttons at the same time and slide out the dust cup. Hold the dust cup over the trash. Press the Empty button and pull open the dust cup lid until it clicks and locks in the open position. Gently tap the cone-shaped screen inside the dust cup to knock dust and debris into the trash. To reinstall, push the lid closed, then insert the front end of the dust cup into the handheld vacuum first, then the back end, until it clicks into place. IMPORTANT : Unplug the vacuum before performing any maintenance.

CLEANING FILTERS

Regularly rinse and replace the filters to maintain your vacuum’s suction power. To prevent damage from cleaning chemicals, rinse filters with cold water only. Do not use soap. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts. PRE-MOTOR FILTERS: With the dust cup detached, press the Filter Access buttons on both sides of the back of the dust cup, then pull out the filter housing. Pull the foam filter out of the housing, then lift out the felt filter by the pull tab. The Pre-Motor Filters should be washed once a month. POST-MOTOR FILTER: To access the post-motor filter, press the release latch on the filter cover on the handheld vacuum. Remove the cover and lift out the filter. The Post-Motor Filter should be washed once every 9 months.

REPLACEMENT FILTERS

Replacement Pre-Motor Filter Kit XFFKHZ2000 Replacement Post-Motor Filter XPMFHZ2000 NOTE : The pre-motor filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years.

CHECKING FOR BLOCKAGES

CHECK NOZZLE TUBE: Detach the wand, then check the floor nozzle tube for blockages. CHECK FLOOR NOZZLE: With the wand detached, turn the nozzle over to access the bottom cover. With a coin, turn the three locks counterclockwise and open the cover. Remove any blockages from the brushrolls and Debris Intake. CHECK HANDHELD: Remove the handheld vacuum from the wand and check all dust cup intake openings for debris or blockages. CHECK WAND: Detach the wand and check it for blockages.

FLOOR NOZZLE MAINTENANCE

If any hair is wrapped around the brushroll, continue vacuuming, using Carpet mode on a bare floor surface, low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup. To access the brushroll, open the locks on the bottom of the nozzle. With a coin, turn the locks counterclockwise to open, then lift off the cover. Clean off any debris on the bristles and in the Debris Intake.

CLEANING THE SOFT ROLLER

1. To remove the Soft Roller, slide the Eject Roller button on the floor nozzle. 2. Tap loose debris off the Soft Roller. Use a dry towel to wipe it clean, and to remove any debris caught in the teeth behind the Soft Roller. 3. Hand-wash the Soft Roller as needed. Use only water, and let it air-dry completely for at least 24 hours. 4. Reinsert the Soft Roller and press it in until it clicks securely into place.

CORD MAINTENANCE

1. DO NOT pull or carry vacuum cleaner by the cord or use cord as a handle. 2. DO NOT unplug by pulling on the cord. Grasp the plug, not the cord. 3. DO NOT close the soleplate on the cord. 4. DO NOT pull the cord around sharp corners. 5. DO NOT leave the cord near heated surfaces. To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off power to the vacuum and remove the cord from the brushroll or nozzle. NOTE : For best performance, keep the Soft Roller clean with regular maintenance.

TROUBLESHOOTING

Power cord caught in brushroll or floor nozzle.

• To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off power to the vacuum and remove the cord from the brushroll or nozzle.
• Inspect power cord and check for any damage before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.

Vacuum is not picking up debris. No suction or light suction. See Maintenance section for more information.

• Empty the dust cup. Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinstalling them.
• Clear any blockages in the nozzle, wand, handheld vacuum, or accessories. See Checking for Blockages section for more information.
• If any string, hair, or carpet fibers remain wrapped around the brushroll after continued use, carefully clear them away.
• Remove any blockages from the debris intake in the floor nozzle. Press the tabs on both sides of the debris intake tube, then pull up the tube until it extends out of the nozzle. Clear any dirt or blockages. To close, push the tube down until it clicks into place.

Vacuum lifts area rugs.

• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
• Turn off the unit to disengage the brushrolls. To restart, press the power button on the handle.

NOTE : Clean area rugs in Bare Floor mode or with accessories. See Available Accessories section. Vacuum turns off on its own or the indicator light flashes red. If your vacuum overheats, the thermostat will automatically turn off the motor. Perform the following steps to restart: 1. Turn off the vacuum and unplug it. 2. Empty the dust cup and clean the filters. See Emptying the Dust Cup and Cleaning Filters sections. 3. Check for blockages in the wand, floor nozzle, handheld vacuum, inlet openings, and accessories. 4. Reassemble the entire vacuum and ensure all parts click into place. 5. Allow unit to cool for a minimum of 60 minutes. 6. Plug in vacuum and turn it on. Handheld vacuum is warm. Due to the strong suction power of the vacuum, it is normal for the area around the filter exhaust to become warm during and after use. Turn off the vacuum and wait 10 minutes for it to cool down. If it still feels warm, clean the pre-motor and post-motor filters. See Maintenance section for filter cleaning instructions. For all other issues, visit sharkclean.com/support.

SHARK | NINJA

FIVE (5) YEAR LIMITED WARRANTY

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of five (5) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions: What is covered by this warranty? 1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to five (5) years from the original purchase date. 2. I n the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value. What is not covered by this warranty? 1. Normal wear and tear of wearable parts (such as foam filters, HEPA filters, pads, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com. 2. Any unit that has been tampered with or used for commercial purposes. 3. Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling in transit. 4. Consequential and incidental damages. 5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja. 6. Products purchased, used, or operated outside North America. How to get service If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit. How to initiate a warranty claim You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase. A Customer Service Specialist will provide you with return and packing instruction information. How state law applies This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

REGISTER YOUR PURCHASE

registeryourshark.com Scan QR code using mobile device Benefits of registering your product and creating an account:

• Get easier, faster product support and access to warranty information
• Access troubleshooting and product care instructions
• Be among the first to know about exclusive product promotions

TIP : The model number is on the rating label behind the dust cup. TIP : The date code is on one of the prongs of the power cord plug.

RECORD THIS INFORMATION

Model Number: ____ Date Code: ____ Date of Purchase: __ (Keep receipt) Store of Purchase:

TECHNICAL SPECIFICATIONS

Voltage: 120V~, 60Hz Watts: 680W PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® Performance Corded Ultralight with DuoClean® and Self-Cleaning Brushroll. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents © 2021 SharkNinja Operating LLC. DUOCLEAN and SHARK are registered trademarks of SharkNinja Operating LLC. UV580_IB_E_F_S_MP_Mv2 PRINTED IN CHINA

SPECIFICATION

Dusting Brush, Pet Multi-Tool, Duster Crevice Tool, Anti-Allergen Dust Brush, Self-Cleaning Pet Power Brush, Precision Duster
Cleaning Modes| Floor Mode, Above-Floor with Wand, Above-Floor Handheld, Stair Cleaning
Floor Settings| Bare Floor/Small Area Rugs, Carpet
Filter Brand| Shark®
Filter Type| Not specified
Important Safety Instructions| Read all instructions before use, inspect power cord and plug before use, use only identical replacement parts, do not use for any purpose other than those described in the manual, do not use if vacuum cleaner is not working as it should or has been dropped or damaged, and more

FAQS

How do I store the vacuum cleaner?

If provided, secure the power cord around the two cord hooks during storage.

Can I use this vacuum cleaner on stairs?

Use extra care when cleaning on stairs.

What should I do if the nozzle or accessory airflow is restricted?

If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet. Remove all obstructions before you plug in and turn on the unit again.

Can I use this vacuum cleaner without filters in place?

DO NOT use without filters in place. Only use Shark® branded filters and accessories.

How do I clean the vacuum cleaner?

Hand wash with water only. Washing with cleaning chemicals could damage the unit.

Can I use this vacuum cleaner in poorly lit areas, wet or damp surfaces, or outdoor areas?

DO NOT use in poorly lit areas, wet or damp surfaces, outdoor areas, or spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust).

Can I use this vacuum cleaner to pick up liquids or large objects?

DO NOT use to pick up liquids, large objects, hard or sharp objects (glass, nails, screws, or coins), large quantities of dust (drywall dust, fireplace ash, or embers), smoking or burning objects (hot coals, cigarette butts, or matches), flammable or combustible materials (lighter fluid, gasoline, or kerosene), or toxic materials (chlorine bleach, ammonia, or drain cleaner).

Can children use this vacuum cleaner?

Cleaning and user maintenance shall not be made by children. Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. DO NOT allow to be used as a toy. Close supervision is necessary when used near children.

Can I use an extension cord with this vacuum cleaner?

The use of an extension cord is NOT recommended.

What should I do if the power cord or plug is damaged?

DO NOT use the vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the Power cord secured around the two cord hooks. If the motorized brush roll ingests the cord, immediately shut off power to the vacuum and remove the cord.

DOWNLOAD

Shark UV580 Performance Corded UltraLight Vacuum: Owner’s Guide – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>