PHATEN LK-A64 WiFi USB Adapter Installation Guide
- June 13, 2024
- PHATEN
Table of Contents
Quick
installation Guide
LK-A64 WiFi USB Adapter
Wi-Fi USB Adapter
- 1800Mbps wireless transmission rate
- Support the new generation wifi standard
- 2.4Ghz & 5Ghz Dual Band
- Support IEE802.11a/b/g/n/ac wireless standard
- USB 3.0 interface
- Support WPA2 and WPA3
Hardware connection
Please insert the usb adapter directly into the computer’s USB port.
Note: When using the desktop PC, it is recommended to connect the rear
interface of the computer chassis the effect is better!
(Most of the desktop computer’s front USB interface is underpowered or
unavailable)
Driver Installation
-
Click on CD Driver (F) 20220607_ 180533.
-
After opening the program, follow the prompts to install the driver
The installation is complete
Please wait for the wireless adapter to be initialized.
After clicking, it will automatically display downward, and the wireless
connection icon will appear in the lower right corner of the computer. Click
the wireless connection icon”WiFi” and select an available WiFi signal.
Pocket WiFi (AP Mode Setting)
Support analog AP function, share WiFi If there is no router/AP, you can
insert the network card into the connected device, share WiFi immediately,
watch videos, listen to music, play games, and shop online, making your
network experience richer
-
Right click on the WiFi hotspot icon and click “goto settings”
-
According to the network name and password in the figure below, connect the equipment required for Internet access
After-sale Service
The Wi-Fi adapter you bought from us enjoy the lifetime warranty. If you have
any issue when you use it, please feel free to contact us, we will reply you
within 12hours.
E-mail Address:
Aftersaleservice12@outlook.com
WhatsApp: +86 15846844485
Contact us on Amazon via order
We have a professional customer service team to solve after-sale problems for
you ASAP.
FCC Warning Statement: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>