Eastron SDM630MCT Three Phase Multifunction Energy Meter User Manual

: June 2, 2024
: EASTRON

Table of Contents

SDM630MCT Three Phase Multifunction Energy Meter
Product Specifications:
Product Usage Instructions:
Safety Instructions:
Setting PT Rate Value:
Contact Information:
- Frequently Asked Questions (FAQ):
Q: What should I do if I encounter an electrical danger
Q: Can I change the PT rate value to a different setting?

SDM630MCT Three Phase Multifunction Energy Meter

“`html

Product Specifications:

Brand: Zhejiang Eastron Electronic Co.,Ltd.
Model: MID DH-SMS-0238
PT Rate Value: 4.4
Address: No.1369, Chengnan Rd, Jiaxing, Zhejiang, China
Contact: Tel: 86 573 83698881/83698882, Email:
sales@eastrongroup.com
Website: www.eastrongroup.com

Product Usage Instructions:

Safety Instructions:

The installation instructions do not include a complete list of
all safety measures necessary for operating the device. Special
operating conditions may require additional measures. The
installation instructions contain notes that must be observed for
your personal safety to prevent property damage. Safety
instructions in this document are highlighted with a warning
triangle and are presented as follows depending on the level of
risk.

The general warning symbol calls attention to possible risks of
injury. Observe all the instructions listed under the symbol to
prevent injuries or even death. This additional symbol indicates
any electrical danger that can result in serious injuries or
death.

Attention: Warns of an imminently dangerous
situation that can result in property damage or environmental
damage in the event of noncompliance.

Setting PT Rate Value:

Locate the PT rate setting option on the device.
Enter the PT rate value as specified (4.4 in this case).
Confirm the setting and ensure it is saved.

Contact Information:

For any further assistance or queries related to the product,
feel free to contact Zhejiang Eastron Electronic Co.,Ltd. at the
provided contact details.

Frequently Asked Questions (FAQ):

Q: What should I do if I encounter an electrical danger

warning?

A: Immediately cease use of the device and contact a qualified
technician for assistance.

Q: Can I change the PT rate value to a different setting?

A: It is recommended to only set the PT rate value as specified
by the manufacturer to ensure proper device functioning.

“`

Safety Instruction
The Installation instructions do not include a complete list of all safety measures necessary for operating the device. Special operating conditions may require additional measures. The installation instructions contain notes that must be observed for your personal safety to prevent property damage. Safety instructions in this document are highlighted with a warning triangle and are presented as follows depending on the level of risk.
The general warning symbol calls attention to possible risks of injury. Observe all the instructions listed under the symbol to prevent injuries or even death.
This additional symbol indicates any electrical danger that can result in serious injuries or death.
Attention
Warns of an imminently dangerous situation that can result in property damage or environmental damage in the event of noncompliance.

4.4 PT
Set PT rate value
Zhejiang Eastron Electronic Co.,Ltd. No.1369 , Chengnan Rd. Jiaxing, Zhejiang, China Tel:86 573 83698881/83698882 Email:sales@eastrongroup.com Web:www.eastrongroup.com
MID DH-SMS-0238