PROOX PRCDRX548MB 4 Inch Centerset 2 Handle Bathroom Faucet with Pop Up Drain Installation Guide
- June 12, 2024
- PROOX
Table of Contents
PROOX PRCDRX548MB 4 Inch Centerset 2 Handle Bathroom Faucet with Pop Up
Drain
Product Information
The Bathroom Faucet is a versatile and stylish fixture designed for use in bathrooms. It is available in multiple finishes,including MB (Matte Black), BN (Brushed Nickel), BG (Brushed Gold),CH (Chrome), and ORB (Oil Rubbed Bronze). The faucet is easy to install and comes with all the necessary components.
Product Drawing
A detailed drawing of the faucet is provided in the user manual,which shows
the dimensions and specifications of the product.
Care Instructions
To maintain the appearance and functionality of the faucet, it is important
to follow these care instructions:
- Rinse the product with clear water after each use.
- Dry the product with a soft cloth to prevent water spots or mineral buildup.
- Do not use abrasive cleansers, cloths, or paper towels as they may scratch the surface of the faucet.
- Avoid using cleaning agents containing acid, polish, wax, alcohol, ammonia, bleach, solvent, or any other corrosive or harsh chemicals.
Recommended Tools
Before starting the installation process, it is recommended to have the
following tools handy:
- Plumber’s putty
- Thread seal tape
Product Usage Instructions
Installation Steps
Before You Begin:
Make sure you have the necessary tools and familiarize yourself with the product dimensions:
- Fixed width: 3.94 inches
- Width from the center of the first hole to the center of the second hole: 1.38 inches/35mm
- Max. countertop thickness: Check the specifications for your specific model
Step 1: Hand tighten
Attach the faucet to the sink by handtightening it. Ensure it is securely
fastened but avoid overtightening to prevent damage.
Step 2: Water Supply Line
Connect the water supply line to the faucet. Use a wrench or pliers to
tighten the connection, ensuring it is leak-free.
Step 3: Turn On Water Supply
Open the water supply valves to allow water flow. Check for any leaks both
above and below the sink. If any leaks are detected,tighten the connections
further.
Step 4: Confirm Proper Installation
Before using the faucet, open the hot and cold water handles slowly. Let
the water run for at least 15 seconds each to flush out any impurities.
Step 5: Open
Your faucet is now ready to use. Enjoy using both hot and cold water by
conveniently adjusting the handles.
CARE INSTRUCTIONS
Rinse the product with clear water. Dry the product with a soft cloth.
DO NOT:
Use abrasive cleansers, cloths, or paper towels. Use any cleaning agents
containing acid, polish, wax, alcohol, ammonia,bleach, solvent or any other
corrosive orharsh cheminalc cleansers.
RECOMMENDED TOOLS
PRODUCT DRAWING
INSTALLATION STEPS
BEFORE YOU BEGIN
-
HAND TIGHTEN
-
WATER SUPPLY LINE
-
TURN ON WATER SUPPLY
Check for leaks above and below the sink. -
CONFIRM PROPER INSTALLATION
Open Slowly Allow hot & cold water to run for at least 15 seconds each.
