NILLKIN SXJ129 S7 Plus S8 Plus 12.4 Inch Keyboard Case User Manual

NILLKIN SXJ129 S7 Plus S8 Plus 12.4 Inch Keyboard Case

Product introduction

Equipped with an adjustable stand, removable keyboard and trackpad, the Bumper Combo Keyboard Case makes it convenient to type, watch movies, read and draw, and also lets you enjoy a flexible operation experience. The adopted military- grade anti-fall case highly fits close to the iPad. The patented sliding lens cover design provides reliable protection for the front back, four corners and camera of the device. Concise and delicate PU fabric blends with the aesthetics of Pad, a perfect integration of art and technology.

Product specifications

• Bluetooth version: Wireless 3.0
• Effective operating range: Within 10 meters
• Modulation mode: GFSK
• Input voltage: SV
• Input current: 2A
• Standby duration: 180 days
• Charging time: 2.s hours
• Lithium battery capacity: SOOmAh
• Sustainable working hours: Backlit mode 14h Non-backlit mode 100h

Indicator light graphic

Indicator description

Keyboard Indicators| Indicator colors| Indicator status
---|---|---
Power indicator| Red| light is on when power on, then off after 3 seconds
Bluetooth indicator| Blue| Flashes and turns off after a successful connection
Low voltage indicator| Red| Keep flashing slowly until the keyboard stops working
Charging indicator| Red/Green| Red light on while charging, tum green when fully charged
Caps lock indicator| Blue| On when uppercase, off when lowercase
Power indicator| Red| 1. Red light flashes once, Power remaining 0-25%
2. Red light flashes twice, Power remaining25-50%
3. Red light flashes three times, PowerremainingS0-75%
4. Red light flashes four times, Power remaining 75-100%

Bluetooth keyboard connection steps

Operation steps on the keyboard:

• Step 1: Slide the power switch of the keyboard to ON position, and Power indicator will be on for 3 seconds, then off.
• Step 2: Press FN+connect, The Bluetooth indicator will flash and turn into pairing mode

Operation steps on Pad:

• Step 3: Turn Bluetooth on Pad
• Step 4: Find the Bluetooth keyboard device and click to connect.
• Step 5: “Connected” will display when connected, the Bluetooth indicator will go off

Energy-saving sleep mode
The keyboard will automatically enter the sleep state when there is no opera­tion command within 10 minutes on it. Just press any key to turn on the power indicator, and the keyboard rework normally.

Charging method
Connect to the 5V2A adapter, connect the Type-C charging cable to the keyboard to charge
Note: The charging indicator is red when charging; when fully charged, it turns green automatically.

Keyboard shortcut function key description

Touch panel gesture instruction

Switch to Samsung Keyboard instruction

1. Go to “Setting”, Go to “General management”.
2. Go to “Keyboard list and default”.
3. Go to “Default keyboard”, choose “Samsung Keyboard”.

Troubleshooting

1. Make sure the power is on
2. Make sure the keyboard is within the operable distance
3. Make sure the battery is fully charged
4. Make sure the Bluetooth setting of iPad is on
5. Make sure the connection of wireless keyboard and Bluetooth is on
6. Make sure the wireless keyboard and Bluetooth are paired

Notes

1. Please keep the product away from water and other liquids.
2. Please keep the ambient temperature at 0-45 °C.
3. Do not seriously impact, disassemble or repair this product by yourself.
4. Do not touch benzene, diluent and other chemicals.
5. It is recommended to turn off the keyboard to prolong the battery service life when the keyboard is not used for a long time
6. To keep a longer battery life, it is recommended to charge the keyboard only when the power supply flashes, and each charging time should be no less than 2 hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>