Outwell 590173 ECOcool 24 ltr Slate Grey Coolbox 12v and 230v Instruction Manual
- June 13, 2024
- Outwell
Table of Contents
Outwell 590173 ECOcool 24 ltr Slate Grey Coolbox 12v and 230v
Product Information
- Model: 590173, ECOcool Slate Grey 24 12V/230V
- Model: 590174, ECOcool Slate Grey 35 12V/230V
- Model: 590208, ECOlux 24 12V/230V
- Model: 590209, ECOlux 35 12V/230V
The ECOCOOL is an innovative family camping cooler available in two sizes: 24L and 35L. It operates on both 12V and 230V power sources, making it suitable for use in various settings. The cooler comes in Slate Grey color and is designed for convenience and efficiency.
Product Usage Instructions
Safety Instructions
Please observe the following safety instructions:
- DANGER! Safety instruction: Failure to observe this instruction can cause fatal or serious injury.
- WARNING! Safety instruction: Failure to observe this instruction can cause fatal or serious injury.
- CAUTION! Safety instruction: Failure to observe this instruction can lead to injury.
- NOTICE! Failure to observe this instruction can cause material damage and impair the function of the device.
- NOTE: Supplementary information for operating the device.
General Safety
DANGER!
- Before connecting the quick charging device, disconnect power-consuming devices from the battery.
- If the cooler is connected to the DC socket, disconnect or switch it off when you turn off the engine to avoid discharging the battery.
Intended Use
CAUTION! Health hazard! If you wish to cool medicines, please check if the cooling capacity of the device is suitable for the medicine in question.
Technical Description
Antibacterial effect:
This product has been treated with a biocidal product (Silver-zinc-aluminum-
boron phosphate-glass), which has an antibacterial effect.
Operation
CAUTION! To avoid contamination of food, keep the cooler clean and ensure
it is properly sealed.
NOTE: Keep the door slightly open to prevent mold development within the
appliance.
Using the Cooler
NOTE: For coolers with fold-in handles, place the cooler on a firm base.
Connection cable plug:
- For coolers without the additional heating feature: Connect the corresponding cable (see figure) to the required voltage. The cooler will start cooling the interior. To switch off the cooler, disconnect the plug.
- For coolers with the additional heating feature: Connect the corresponding cable (see figure) to the required voltage. For fast cool down, switch to MAX on the cool box (note that this will not run on ECO mode). It is advised to primarily use the ECO function. Push the switch on the control panel to HOT or COLD to switch the cooler on. The indicators on the control panel show you the operating mode.
Follow these instructions carefully to ensure safe and efficient usage of the ECOCOOL cooler.
INSTRUCTION
Please read this operating manual carefully before starting the device. Keep it in a safe place for future reference. If the device is resold, this operating manual must be handed over to the purchaser along with it. The manufacturer cannot be held liable for damage resulting from improper usage or incorrect operation. Versions, technical modifications and delivery options reserved.
Please observe the following safety instructions.
NOTE : ON USING THE INSTRUCTION MANUAL
The following symbols are used in this operating manual:
-
DANGER:
Safety instruction: Failure to observe this instruction can cause fatal or serious injury. -
WARNING:
Safety instruction: Failure to observe this instruction can cause fatal or serious injury. -
CAUTION:
Safety instruction: Failure to observe this instruction can lead to injury. -
NOTICE:
Failure to observe this instruction can cause material damage and impair the function of the device. -
NOTE:
Supplementary information for operating the device.
Action : This symbol indicates that action is required on your part. The required action is described step-by-step. ✓ This symbol describes the result of an action. fig. ➀ 5, page 3: This refers to an element in an illustration. In this case, item 5 in figure 1 on page 3.
Please observe the following safety instructions.
SAFETY INSTRUCTIONS
General safety
DANGER
- On boats : If the appliance is powered by the mains, ensure that the power supply has a residual current circuit breaker.
WARNING
- Do not operate the device if it is visibly damaged.
- This device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
- Persons whose physical sensory or mental capacities prevent them from using this device safely should not operate it without the supervision of a responsible adult.
- Electrical devices are not toys. Always keep and use the device out of the reach of children.
- Children 3 to 8 years old are allowed to load and unload refrigerating appliances.
- If this device’s power cable is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person in order to prevent safety hazards.
CAUTION
- Disconnect the device from the mains
- before cleaning and maintenance
- after use
- Food may only be stored in its original packaging or in suitable containers.
NOTICE
- Only connect the device as follows:
- With the DC cable to a DC plug socket in the vehicle (e. g. cigarette lighter)
- Or with the 230 V connection cable to the 230 V AC mains supply
- Check that the voltage specification on the type plate corresponds to that of the energy supply.
- The cooling device is not suitable for transporting caustic materials or materials containing solvents.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance
- Never pull the plug out of the socket by the cable.
- If the cooler is connected to the DC socket: Disconnect the cooler and other power consuming devices from the battery before connecting the quick charging device. If the cooler is connected to the DC socket: Disconnect the cooler or switch it off when you turn off the engine. Otherwise you may discharge the battery.
Operating the device safely
DANGER
-
Do not touch exposed cables with your bare hands. This especially applies when operating the device with an AC mains power supply.
-
When positioning the appliance ensure the supply cord is not trapped or damaged.
-
Do not locate multiple portable socket -outlets or portable power supplies at the rear of the appliance.
Danger of overheating -
Ensure at all times that there is sufficient ventilation so that the heat that arises during operation does not build up. Make sure that the device is sufficiently far away from walls and other objects so that the air can circulate.
-
Ensure that the ventilation slots are not covered.
-
Do not fill the inner container with ice or fluid.
-
Never immerse the device in water.
-
Protect the device and the cable against heat and moisture.
3 INTENDED USE
- The appliance shall not be exposed to rain.
- The cooling device is suitable for cooling foodstuffs.
- The device is also able to heat using the additional heating feature.
- The device is designed for use with:
- a DC vehicle electrics socket of a car (such as a cigarette lighter), boat or caravan (see voltage specification on the type plate)
- a 230 V AC mains supply
The appliance is intended for camping use
CAUTION! Health hazard!
If you wish to cool medicines, please check if the cooling capacity of the device is suitable for . the medicine in question.
TECHNICAL DESCRIPTION
The cooler is portable. It can cool items and keep them cool or heat items and keep them warm (with the additional heating feature) to max. 65 °C. Its cooling system is a non-wearing Peltier cooling, the heat is discharged by a fan.
Optional accessories
The device is available in different versions. The version you bought may have
the following additional features:
Heating
The contents of your cooler can be warmed or kept warm to max. 65 °C.
Priority circuit
Models with a priority circuit have an integrated mains adapter. The device
switches automatically to mains operation when it is connected to a 230 V AC
mains supply even if the DC connection cable is still connected.
Antibacterial effect
This product has been treated with a biocidal product (Silver-zinc-aluminum-
boron phosphate-glass), which has an antibacterial effect.
OPERATION
CAUTION! To avoid contamination of food.
-
Food may only be stored in its original packaging or in suitable containers.
NOTE: -
Before starting your new cooling device for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons (please also refer to the chapter “Cleaning and maintenance”.
-
A few water drops may form inside the cooler if it has been cooling for a lengthy period. This is normal because the moisture in the air condenses to water when the temperature in the cooler falls. The cooler is not defective. Wipe it out with a dry cloth if necessary.
Energy saving tips
- Choose a well ventilated installation location which is protected against direct sunlight.
- Allow warm food to cool down first before placing it in the device to keep cool.
- Do not leave the cooler unit open for longer than necessary.
- Remove individual drinks bottles through the bottle hatch, if present.
- Opening the lid for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Clean regularly surfaces that can come in contact with food and accessible drainage systems.
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
Using the cooler
NOTICE! Risk of damage
- Ensure that the objects placed in the cooler are suitable for cooling or heating (with the additional heating feature) to the selected temperature.
- Ensure that food or liquids in glass containers are not excessively refrigerated. Liquids expand when they freeze and can therefore destroy the glass containers.
- Ensure that your cooler is well ventilated so that any heat created can dissipate. Otherwise proper functioning cannot be ensured. It is especially important not to cover the air vents.
NOTE: For coolers with fold in handles
- Place the cooler on a firm base. Connection cable plug Coolers without the additional heating feature
- Connect the corresponding cable (see figure) to the required voltage.
- The cooler starts cooling the interior.
- To switch off the cooler, disconnect the plug. Coolers with the additional heating feature
- Connect the corresponding cable (see figure) to the required voltage.
- For fast cool down switch to MAX on the cool box. Please be aware that doing so you will not run on ECO mode. We advice that the ECO function is primarily used.
- Push the switch on the control panel to HOT or COLD to switch the cooler on.
- The indicators on the control panel show you the operating mode:
Operating display Operating mode
- Red Heating
- Green Cooling
- The cooler starts cooling/heating the interior.
- To switch off the cooler,
- slide the switch to the OFF position,
- disconnect the plug.
If this coolbox runs on 12V Eco mode is not possible. If it runs on 230V both Max and Eco mode is possible.
Connecting to the cigarette lighter
NOTE:
If you connect the cooler to the cigarette lighter, remember that the ignition
must be turned on to supply it with power.
Replacing the DC plug fuse (12V)
- Unplug the cable from the 12V socket and cooler.
- Turn the plastic cap anticlockwise. Remove plastic and metal cap. Replace fuse with a new one that has the same rating (T6,3A/250V)
- Re-assemble the plug in the reverse order.
Replacing the AC plug fuse (220-240V)
- Unplug the cabel from the mains socket and the cooler.
- Unscrew the large screw in the centre of the plug. Remove back cover. Replace fuse with a new one that has the same rating (BS 1362 /3A)
- Re-assemble the plug in the reverse order.
CLEANING AND MAINTENANCE
WARNING:
Always disconnect the device from the mains before you clean and service it.
NOTICE! Risk of damage
- Never clean the cooler under running water or in dish water.
- Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the cooler.
- Occasionally clean the device interior and exterior with a damp cloth.
TROUBLESHOOTING
DISPOSAL
- Place the packaging material in the appropriate recycling waste bins wherever possible. If you wish to finally dispose of the device.
- Remove cables, lid with eletric engine, body and handle and dispose according to local regulations, ask your local recycling centre for details about how to do this in accordance with the applicable disposal regulations.
TECHNICAL DATA
We strive to have spare parts available for up to 10 years. For more information please see www.outwell.com
Model: ECOcool/ECOlux 590173 & 590208 EC-1225-AC/DC| | Model: ECOcool/ECOlux
590174 & 590209 EC-1335
---|---|---
Power: 12V DC| Cold Mode:| 48W| |
Power: 12V DC| Cold Mode:| 48W
Hot Mode:| 45W| Hot Mode:| 45W
Power: 220-240V ~50Hz-AC| Cold Mode:|
53W| | Power: 220-240V ~ 50Hz-AC|
Cold Mode:| 55W
Hot Mode:| 48W| Hot Mode:| 50W
| |
Climate Class: N, SN| | Climate Class:
N, SN
Total Volume: 24L| | Total Volume:
35L
Pantry Compartment Volume: 24L| | Pantry Compartment Volume:
35L
Energy Consumption of E16: 0.019 kWh/24h| | Energy Consumption of E16:
0.020 kWh/24h
Energy Consumption of E32: 0.495 kWh/24h| | Energy Consumption of E32:
0.500 kWh/24h
Annual Energy Consumpion: 94 kWh/a| | Annual Energy Consumpion:
95 kWh/a
Oase Outdoors ApS
EU: Kornvej 9, DK-7323 Give, Denmark UK: One Glass Wharf, Bristol, BS2 0ZX
| MADE IN CHINA| | Oase Outdoors ApS
EU: Kornvej 9, DK-7323 Give, Denmark UK: One Glass Wharf, Bristol, BS2 0ZX
| MADE IN CHINA
Documents / Resources
|
Outwell 590173 ECOcool 24 ltr Slate Grey Coolbox 12v and
230v
[pdf] Instruction Manual
590173 ECOcool 24 ltr Slate Grey Coolbox 12v and 230v, 590173, ECOcool 24 ltr
Slate Grey Coolbox 12v and 230v, Grey Coolbox 12v and 230v, Coolbox 12v and
230v
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>