speco technologies PVMMT75 VESA Mount Instruction Manual
- June 13, 2024
- speco technologies
Table of Contents
PVMMT75 Clamp-on Mount Installation Manual
PVMMT75 VESA Mount
Noting: This mount is only for VESA 75x75mm PVM/Monitors
Caution: Max Load Weight 6KG
Accessory List
| ■ Solid Wrench | x1 |
|---|---|
| ■ Hexagonal Wrench | x1 |
| ■ 33-57mm Stainless Clamp | x2 |
| ■ 65-89mm Stainless Clamp | x2 |
| ■ M6x90 Screw | x2 |
| ■ Cushion for M6x90 Screw | x2 |
| ■ Cap for M6x90 Screw | x2 |
| ■ Metal Transfer Plate | x1 |
| ■ M6x12 Screw for Transfer Plate | x2 |
Installation
-
Attach the plate base to the pipe or tube, then use stainless clamp to fix.
-
For added security to the clamps, you can also install 2pcs M6x90 screws to fix.(Please use cushion and cap to fix with M6x90 screw)
-
Use M4x8 screws to install the PVM with the VESA 75x75mm plate; and you can adjust the mounting angle/length as below by loosening the fixing screw.
-
Attach the whole mount bracket to the plate base, and then use M6x12 screws to lock the bracket and plate base.
-
In vertical mounting applications, you will need to use metal transfer plate. Then mount as above.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>