SANUS VIWLF128-B2 In-Wall Full-Motion TV Mount Instruction Manual

SANUS VIWLF128-B2 In-Wall Full-Motion TV Mount

Product Information

Electric Drill, 1/8 in. (3 mm) Drill Bit
Dimensions| TV Interface: 3.9″ x 23.6″ (100.0 mm x 600.0 mm)
Wall Plate: 16.0″ x 7.8″ (406.4 mm x 196.9 mm)
Fully Assembled Mount: 18.1″ x 20.8″ x 24.9″ (460.8 mm x 529.0 mm x
632.6 mm)

Product Usage Instructions

1. Make sure your TV (including accessories) does not exceed the weight limit of 135 lbs. (61.2 kg). If it does, this mount is not compatible. Contact customer service for a compatible mount.
2. Ensure you have a wood stud wall for installation. Do not install the mount in drywall alone, as it will not hold the weight of your TV.
3. If you are unsure about the wall construction, contact customer service for assistance.
4. Gather the necessary tools: tape, pencil, stud awl, level, measure finder, screwdriver, electric drill, and a 1/8 in. (3 mm) drill bit.
5. Follow the provided dimensions for the TV interface and wall plate to align and mount the wall mount correctly.
6. If you need further assistance or have any doubts about the safety of the installation, assembly, or use of this product, contact customer service for support.

Thank you for choosing Sanus! Please take a moment to let us know how we did:

WE’RE HERE TO HELP

Want to watch a video that shows how easy this is?
Watch it now at: SANUS.com/3151

Get it right the first time. HeightFinder™ shows you where to drill.
Use it now: SANUS.com/2567

Our live install experts are standing by to help.
Call us at:
US: +1 800-359-5520
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 2853

IMPORTANT SAFETY INSTRUCTIONS

– PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS

WARNING: Avoid potential personal injuries and property damage!

• DO NOT INSTALL THIS MOUNT IN A FIREWALL (The wall between a garage and a living space, or the wall between two condominiums or occupancies sharing a wall). Contact your local building inspector before cutting a hole in the drywall if unsure.
• This product is designed ONLY to be installed into wood stud walls— DO NOT INSTALL INTO DRYWALL ALONE
• Do not use this product near water; such as a bath tub, wash bowl, kitchen sink, laundry tub, swimming pool, or in a wet basement.
• Equipment shall be installed in accordance with ANSI/NFPA 70, National Electrical Code (NEC), NFPA 72, CAN-ULC-S540, Canadian Electrical Code, and/or other applicable sections of ANSI/IEEE C2 & National Electrical Safety Code (NESC). Equipment intended for installation in information technology equipment (computer) rooms should be installed in accordance with NFPA 75, Standard for the Fire Protection of Information Technology Equipment.
• Installation shall be completed by a professional electrical contractor or low voltage technician.
• Do not use this product for any purpose not explicitly specified by manufacturer
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Please read through these instructions completely to be sure you’re comfortable with this easy install process. Check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service: [US]: +1 (800)-359-5520 [EMEA]: +31 (0) 495 580 852 [UK]:+44 (0) 800 056 2853.

TV Weight Limit (including accessories)
DO NOT EXCEED

If your TV (plus accessories) weighs MORE, this mount is NOT compatible.
Visit SANUS.com or call customer service to find a compatible mount.

Wall Construction
ONLY install on wood stud wall.

CAUTION:
DO NOT install in drywall alone
Drywall alone will NOT hold the weight of your TV.

Unsure
Call Customer Service:
[US]: +1 (800)-359-5520
[EMEA]: +31 (0) 495 580 852
[UK]: +44 (0) 800 056 2853

Tools Needed

Dimensions

BEFORE YOU BEGIN

Remove the stand from your TV — if attached.

Install any accessories you may have purchased, if they require TV removal prior to assembly. The TV is removable for future accessory purchases.

Protect the face of your TV when laying it down for installation.

Supplied Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.

STEP 1 Attach TV Brackets to TV

Select TV Screw Diameter
Only one screw size fits your TV.

NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.

Select TV Screw Length and Spacers
NO SPACER

• Flat Back TV
  [TV brackets lay flat on your TV]

Use short TV screws 01 . Spacers 03 not needed.

SPACER NEEDED

• Flat Back TV with extra space needed [for deep inset holes or cable interference]
• Rounded or Irregular Back TV [TV brackets NOT resting flat on your TV] Use long TV screws 01 and spacers 03 to create extra space between the TV and TV bracket.

CAUTION: Verify adequate thread engagement with your screw 01 , washer 02 , spacer 03 combination AND TV bracket 04 .

• Too short will not hold your TV.
• Too long will damage your TV.

Attach TV Brackets to Your TV

CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws 01 and 06 only enough secure the TV brackets to the TV.

STEP 2 Attach The In-wall Box

Wood Stud Installation

CAUTION: Avoid potential personal injury or property damage!

• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
• Spacing between studs: 14 in. to 15 in. (356 mm to 381 mm)
• Minimum depth into wall cavity: 3.9 in (99 mm)
• Verify there are no obstructions in the wall cavity, behind the area you intend to install.

STEP 3 Hang your TV onto The In-wall Box

Attach Arm Assembly to the In-wall Box

NOTE: The top two screws 12 will not seat fully – tighten until snug.

CAUTION: Avoid potential injuries or property damage!
Locking screw 13 MUST be installed to secure the TV mount and the arm assembly.

Manage Cables

1.   IMPORTANT: Fully extend arm assembly 11 to ensure enough slack in cables.
2. Route your cables through the arm assembly 11 and secure with clips 15 .
   IMPORTANT: Be sure cables are not in a position to be pinched when mount is in motion.

Install Components

Junction Box (Not Included)
WARNING: Electric Shock Hazard! Avoid potential serious injuries or death. Consult a qualified electrician for proper installation.
NOTE: Knock-outs K are provided for the installation of a UL Listed electrical junction box (not included) and UL Listed receptacle (not included).
CAUTION: If installing a junction box, follow all instructions included with the UL Listed electrical junction box and UL Listed receptacle.

Secure components with straps 17 and hole plugs 16 .

NOTE: Install components so they don’t interfere with the arms 11 when in the home position.

TV Adjustments

TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight, adjust the side tension knob T .

NOTE: Once your TV is in place, tighten the tension knob T to prevent unwanted movement.
NOTE: Additional tension can be applied using hex key 18 .

LEVEL ADJUSTMENT

CAUTION:
Screw 13 MUST be loosened before turning screw S .

CAUTION: Avoid potential personal injury or property damage! Always make sure your securement screw 13 is tightened, so the TV is securely fastened to the arm assembly.

REMOVING THE TV
HEAVY! You may need assistance with this step.

REMOVING THE ARM

REMOVING THE BOX

Legrand AV Inc.
6436 City West Parkway
Eden Prairie, MN 55344 USA
US: +1 800-359-5520
SANUS.com

Legrand AV Netherlands B.V.
Franklinstraat 14
6003 DK Weert Netherlands
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 2853
SANUS.com

Authorized Representative for the UK
Starline Holding Technology Ltd.
Unit C Island Road
Reading RG2 0RP UK

References

• SANUS | #1 Brand of TV Wall Mounts in the U.S.
• SANUS | #1 Brand of TV Wall Mounts in the U.S.
• HeightFinder | SANUS
• SANUS VIWLF128 | In-Wall Mounts | TV Mounts and Stands | Products | SANUS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>