Hatco CORPORATION IWRM Series Palletti Induction Warmer Instruction Manual
- June 12, 2024
- Hatco Corporation
Table of Contents
Hatco CORPORATION IWRM Series Palletti Induction Warmer
Product Information
The product is an Induction Warmer manufactured by Hatco Corporation. It comes in three different models: IWRM Series, IWRM-C1-1317-06, IWRM-CD1-03, IWRM- CD1-05, IWRM-B1-1313-06, and IWRM-B1-1313-05. The product is designed for countertop use and is available in both international and standard models. It is equipped with various components and replacement parts to ensure efficient operation.
Specifications:
- Model Name: IWRM Series
- Model Numbers:
- IWRM-C1-1317-06
- IWRM-CD1-03
- IWRM-CD1-05
- IWRM-B1-1313-06
- IWRM-B1-1313-05
- IWRM-UX-06
Replacement Parts List:
The product comes with a list of replacement parts for easy maintenance and
repair. The parts include:
| Item Description | Part No. | Qty. |
|---|---|---|
| Top, Ceramic Glass | 04.40.577.00 | 1 |
| Connector Wire | 02.18.994.00 | 1 |
| Label, Control Panel | 07.01.448.00 | 1 |
| Control Board, Panel | R02.01.574.01 | 1 |
| Insulation, Glass | 05.05.552.00 | 1 |
| MICA Plate | 02.05.1063.00 | 1 |
| Control Board, Main | R02.01.551.03 | 1 |
| Spacer, Nylon | 05.30.252.00 | 4 |
| Cooling Fan | 02.12.175.00 | 2 |
| USB Cable | 02.18.786.00 | 1 |
Wiring Diagram:
The product also includes a wiring diagram for easy installation and
troubleshooting.
Product Usage Instructions
- Locate the Specification Label on the unit to determine the exact Model Name and electrical specifications. This information is necessary to identify the correct replacement parts.
- Refer to the exploded view illustration(s) in the user manual to find the location of the Specification Label.
- CAUTION: Only use replacement parts supplied by Hatco Corporation. Using other parts will void all warranties and may result in damage to the unit or injury to personnel.
- If any component or part needs replacement, refer to the Replacement Parts List and note down the corresponding Item Description and Part No.
- For installation and troubleshooting, refer to the Wiring Diagram provided.
- Follow the wiring instructions carefully to ensure proper electrical connections.
- If you are using a countertop daisy chain induction warmer (Models IWRM-CD1-03, IWRM-CD1-05), refer to the specific item descriptions and part numbers mentioned for these models.
- For built-in induction warmers (Models IWRM-B1-1313-06, IWRM-B1-1313-05, IWRM-UX-06), follow the same instructions mentioned above, referring to the relevant item descriptions and part numbers.
By following these instructions, you can ensure proper usage and maintenance of the Hatco Corporation Induction Warmer.
IMPORTANT NOTE:
Locate the Specification Label on unit to determine exact Model Name and
electrical specifications. This information is needed to identify the correct
replacement parts. See exploded view illustration(s) for Specification Label
location.
CAUTION Use of replacement parts other than those supplied by Hatco
Corporation will void all warranties and may result in damage to the unit or
injury to personnel.
Countertop Induction Warmers
Model IWRM-C1-1317-06
| Item | Description | Part No. | Qty. |
|---|---|---|---|
| 1 | Top, Ceramic Glass | 04.40.577.00 | 1 |
| 2 | Connector Wire | 02.18.994.00 | 1 |
| 3 | Label, Control Panel | 07.01.448.00 | 1 |
| 4 | Control Board, Panel | R02.01.574.01 | 1 |
| 5 | Insulation, Glass | 05.05.552.00 | 1 |
| 6 | MICA Plate | 02.05.1063.00 | 1 |
| 7 | Control Board, Main | R02.01.551.03 | 1 |
| 8 | Spacer, Nylon | 05.30.252.00 | 4 |
| 9 | Cooling Fan | 02.12.175.00 | 2 |
| 10 | USB Cable | 02.18.786.00 | 1 |
| Item | Description | Part No. | Qty. |
| --- | --- | --- | --- |
| 11 | USB Cover | 02.20.288.00 | 1 |
| 12 | Rubber Foot | 05.30.295.00 | 4 |
| 13 | Thermistor Assembly | 02.18.887.00 | 2 |
| 14 | Induction Coil | 04.44.128.00 | 1 |
| 15 | Fuse | 02.03.093.00 | 1 |
| 16 | Control Board, EMI | R02.01.565.00 | 1 |
| 17 | Cord Grip | 02.20.447.00 | 1 |
| 18 | Power Cord w/Plug | ||
| NEMA 5-15P, 120 V | 02.18.583.00 | 1 | |
| Wiring Diagram | 10-01-1502 |
Countertop Daisy Chain Induction Warmer
Models IWRM-CD1-03, IWRM-CD1-05
| Item | Description | Part No. | Qty. |
|---|---|---|---|
| 1 | Top, Ceramic Glass | 04.40.577.00 | 1 |
| 2 | Connector Wire | 02.18.994.00 | 1 |
| 3 | Label, Control Panel | 07.01.448.00 | 1 |
| 4 | Control Board, Panel | R02.01.574.01 | 1 |
| 5 | Insulation, Glass | 05.05.552.00 | 1 |
| 6 | MICA Plate | 02.05.1063.00 | 1 |
| 7 | Control Board, Main | ||
| IWRM-CD1-03, 600 W, 120 V | R02.01.551.05 | 1 | |
| IWRM-CD1-05, 500 W, 230 V | R02.01.551.02 | 1 | |
| 8 | Spacer, Nylon | 05.30.252.00 | 4 |
| 9 | Cooling Fan | 02.12.175.00 | 2 |
| 10 | USB Cable | 02.18.786.00 | 1 |
| 11 | USB Cover | 02.20.288.00 | 1 |
| 12 | Rubber Foot | 05.30.295.00 | 4 |
| 13 | Thermistor Assembly | 02.18.887.00 | 2 |
| Item | Description | Part No. | Qty. |
| --- | --- | --- | --- |
| 14 | Induction Coil | ||
| IWRM-CD1-03, 600 W, 120 V | 04.44.128.00 | 1 | |
| IWRM-CD1-05, 500 W, 230 V | 02.10.016.00 | 1 | |
| 15 | Fuse | 02.03.093.00 | 1 |
| 16 | Control Board, EMI | R02.01.565.00 | 1 |
| 17 | Power Inlet, IEC | ||
| IWRM-CD1-03, 15 A | 02.18.1315.00 | 1 | |
| IWRM-CD1-05, 10 A | 02.18.1101.00 | 1 | |
| 18 | Circuit Breaker | ||
| IWRM-CD1-03, 125 V | 02.19.282.00 | 1 | |
| IWRM-CD1-05, 125/250 V | 02.19.293.00 | 1 | |
| 19 | Power Outlet, IEC | ||
| IWRM-CD1-03, 15 A | 02.18.1314.00 | 1 | |
| IWRM-CD1-05, 10 A | 02.18.1102.00 | 1 | |
| Wiring Diagram | |||
| IWRM-CD1-03 | 10-01-1503 | ||
| IWRM-CD1-05 | 10-01-1611 |
Built-In Induction Warmer
Models IWRM-B1-1313-06, IWRM-B1-1313-05. IWRM-UX-06
| Item | Description | Part No. | Qty. |
|---|---|---|---|
| 1 | Screw w/Washer, Pan Head | 05.04.855.00 | 6 |
| 2 | Rear Enclosure, Control Panel | ||
| IWRM-B1-1313-06, -05, -06 | 04.44.144.00 | 1 | |
| 3 | Standoff | 05.04.1004.00 | 4 |
| 4 | Control Board, Panel | R02.01.574.01 | 1 |
| 5 | Front Panel, Control Panel | 04.44.143.00 | 1 |
| 6 | Label, Control Panel | 07.01.449.00 | 1 |
| 7 | Control Cable, RJ45 | 02.18.1064.00 | 1 |
| 8 | Control Box Kit | R04.44.143.00 | 1 |
| 9 | Cooling Fan | 02.12.183.00 | 1 |
| 10 | Communication Cable | 02.18.1054.00 | 1 |
| 11 | Top, Ceramic Glass | 1 | |
| IWRM-B1-1313-06, -05 | |||
| Black | 04.40.596.00 | 1 | |
| White | 04.40.616.00 | 1 | |
| IWRM-UX-06, Black | 04.40.627.00 | 1 | |
| 12 | Mounting Frame | 04.44.221.00 | 1 |
| 13 | MICA Plate | 05.05.573.00 | 1 |
| 14 | Insulation, Glass | 05.05.575.00 | 1 |
| 15 | MICA Plate, Coil | 05.05.574.00 | 1 |
| 16 | Thermistor Assembly | ||
| IWRM-B1-1313-06, -05 | 02.18.887.00 | 2 | |
| IWRM-UX-06 | 02.18.1111.00 | 1 | |
| 17 | Top Sensor Kit, IWRM-B1 (includes Items 12, 13, 14, and 15) | ||
| R02.18.887.00 | 1 | ||
| Item | Description | Part No. | Qty. |
| --- | --- | --- | --- |
| 18 | Induction Coil | ||
| IWRM-B1-1313-06, 120 V | 04.44.128.00 | 1 | |
| IWRM-B1-1313-05, 230 V | 02.10.016.00 | 1 | |
| 19 | Fuse | 02.03.093.00 | 1 |
| 20 | Control Board, EMI | R02.01.565.00 | 1 |
| 21 | Control Board, Main | ||
| IWRM-B1-1313-06, 120 V | R02.01.551.04 | 1 | |
| IWRM-B1-1313-05, 230 V | R02.01.551.01 | 1 | |
| IWRM-UX-06 | R02.01.551.06 | 1 | |
| 22 | Power Cord w/Plug | ||
| NEMA 5-15P, 120 V | 02.18.583.00 | 1 | |
| BS-1363, 220–240 V | 02.18.066.00 | 1 | |
| CEE 7/7 Schuko, 220–240 V | 02.18.077.00 | 1 | |
| CCC 10 A, 220–240 V | 02.18.598.00 | 1 | |
| AS 3112, 220–240 V | 02.18.606.00 | 1 | |
| 23 | Cord Grip | 02.20.447.00 | 1 |
| 24 | Wire Harness (not shown) | 02.18.1090.00 | 1 |
| 25 | Trim Ring (not shown) | 04.44.305.00 | 1 |
| Wiring Diagram | |||
| IWRM-B1-1313-06 | 10-01-1504 | ||
| IWRM-B1-1313-05 | 10-01-1612 | ||
| IWRM-UX-06 | 10-01-1551 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>