PROJECT SOURCE M4N1S-06961 Bittersweet Laminate Wood Floor User Manual
- June 12, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE M4N1S-06961 Bittersweet Laminate Wood Floor
Product Information
The 4-in-1 Multifunctional Moulding is a versatile solution for giving your laminate floor a stunning finish. This kit includes enough moulding for two room transitions, making it convenient and cost-effective. The moulding is color-coordinated and can be used in four different ways, providing flexibility and saving you time and money.
- T-Moulding: Connects two floors of equal height.
- Hard Surface Reducer: Connects two hard surface floors of different heights.
- Carpet Transition: Transitions between hard surface floor and carpet.
- End Moulding: Finishes a hard surface floor against fireplaces, sliding doors, and more.
In addition to the 4-in-1 Multifunctional Moulding, there are other finishing solutions available:
- Waterproof Quarter Round: Creates a waterproof perimeter for waterproof and water-resistant flooring. Available in paintable white.
- Quarter Round: Conceals the expansion gap between the wall and wall base and floor. Available in prefinished white or coordinating colors.
- Wall Base: Conceals the expansion gap between the wall and your floor. Available in prefinished white or coordinating colors.
- Stair Nose: Finishes the stair edge. Available in coordinating colors.
For further information and to purchase the product, visit our website.
Product Usage Instructions
- To connect two floors of equal height, use the T-Moulding. Install it securely between the two surfaces.
- If you have hard surface floors of different heights, utilize the Hard Surface Reducer. Install it to create a smooth transition between the two surfaces.
- For transitioning between a hard surface floor and carpet, use the Carpet Transition moulding. Install it securely at the junction of the two surfaces.
- When finishing a hard surface floor against fireplaces, sliding doors, or other obstacles, use the End Moulding. Install it to provide a neat and polished look.
- If you require a waterproof perimeter for waterproof or water-resistant flooring, use the Waterproof Quarter Round. Install it along the edges of your flooring to prevent water damage.
- To conceal the expansion gap between the wall, wall base, and floor, use the Quarter Round moulding. Install it securely in place for a seamless appearance.
- For concealing the expansion gap between the wall and your floor, use the Wall Base. Install it securely along the base of the wall to create a finished look.
- To finish the stair edge, use the Stair Nose moulding. Install it on the edge of each step for added safety and aesthetics.
For more detailed installation instructions and tips, please refer to the user
manual provided with your product.
Note: The 4-in-1 Multifunctional Moulding and other finishing solutions
are exclusively available on our website.
4-in-1 Multifunctional Moulding
One room generally requires more than one transition so our 4-in-1 multifunctional moulding kit provides enough moulding for two room transitions. This simple color-coordinated moulding works four ways, saving you time and money.
-
T-Moulding
Connects two floors of equal height. -
Hard Surface Reducer
Connects two hard surface floors of different heights. -
Carpet Transition
Transitions between hard surface floor and carpet. -
End Moulding
Finishes a hard surface floor against fireplaces, sliding doors, and more.
More finishing solutions
Waterproof Quarter Round
Creates a waterproof perimeter for waterproof and water-resistant flooring.
Available in paintable white.
Quarter Round
Conceals the expansion gap between the wall and wall base and floor. Available
in prefinished white or coordinating colors.
Wall Base
Conceals the expansion gap between the wall and your floor. Available in
prefinished white or coordinating colors.
Stair Nose
Finishes the stair edge. Available in coordinating colors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>