iHome MAGPUCK Magnetic Wireless Charger User Manual
- June 12, 2024
- iHome
Table of Contents
MAGPUCK
MAGNETIC WIRELESS CHARGER
MAGPUCK Magnetic Wireless Charger
Thank you for purchasing the 6 Foot Magnetic Wireless Charging Puck. This user manual will guide you through the setup and usage of the product, ensuring optimal performance and convenience.
Product Overview:
The Mag Puck is a compact and versatile charging solution designed to wirelessly charge compatible devices. It features a strong magnetic base, allowing for easy alignment and secure attachment to your device.
Getting Started:
Follow these steps to set up the charging puck:
a. Unbox the product and ensure all the components are included.
b. Plug the provided power adapter into a wall outlet.
c. Connect the other end of the power adapter to the charging puck.
d. Place the charging puck on a flat surface, ensuring it is within range of
your device.
Charging Process:
To charge your device wirelessly using the charging puck, follow these steps:
a. Ensure that your device supports wireless charging and is compatible with
the charging puck.
b. Attach the charging puck to the back of your device using the magnetic
base.
c. Once the charging puck is securely attached, a charging indicator light
will illuminate.
d. Confirm that the device is properly aligned with the charging puck to
establish a charging connection.
e. The device will begin charging wirelessly. You can use your device while it
is charging, as long as it remains attached to the charging puck.
Note: The charging speed may vary depending on the device and its
wireless charging capabilities.
Safety Precautions:
To ensure safe and reliable operation of the charging puck, please observe the
following precautions:
a. Only use the provided power adapter and cable to power the charging puck.
b. Avoid exposing the charging puck to extreme temperatures, moisture, or
liquids.
c. Keep the charging puck away from flammable materials and direct sunlight.
d. Do not disassemble, modify, or repair the charging puck yourself. Contact
customer support for assistance.
e. Keep the charging puck out of reach of children and pets.
Troubleshooting:
If you encounter any issues with the charging puck, please try the following
troubleshooting steps:
a. Ensure that the power adapter is properly connected to the charging puck
and the power source.
b. Confirm that your device is compatible with wireless charging and that its
wireless charging feature is enabled.
c. Remove any obstructions, such as cases or covers, that may interfere with
the charging process.
d. Clean the magnetic base of the charging puck and the back of your device to
ensure a secure attachment.
e. If the charging puck fails to charge your device, try using a different
power outlet or power adapter.
If the issue persists, please contact our customer support for further
assistance.
Technical Specifications:
Charging Input: 5V/2A, 9V/2A
Charging Output: 5W, 7.5W, 10W, or 15W (depending on device compatibility)
Cable Length: 6 feet
Charging Connector: Magnetic
Compatibility: Qi-enabled devices
Warranty Information:
What is covered under the Lifetime Warranty?
We warrant that this product will be free from defects
in workmanship and materials under normal use (Lifetime Warranty”). In a case
where the product is determined to be “defective”, we will repair the product
free of charge. If we cannot repair the product, we will replace it for you
free of charge.
How long am I covered?
You are covered for the Lifetime of the product which means that as long as we
are still manufacturing and selling the product we cover you under warranty.
What is not covered under the Lifetime Warranty?
- Normal wear and tear of product use.
- Misuse, lack of care, mishandling, accidental damage, abuse or other abnormal use.
- Use of the product other than for its intended purpose.
- Damage caused by improper or unauthorized repair or maintenance.
Congratulations! You are now ready to enjoy the convenience of wireless charging with the Mag Puck Magnetic Wireless Charging Puck.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 15&20cm between the radiator and your body.
Model: 2IHQI2020 / 2IHQI2020B0G7 /2 IHQI2020W0G7 / 2IHQI0850 / 2IHQI0850B0L2 /
2IHQI2057 / 2IHQI2057B0L2 / 2IHQI2057G0L2
FCC ID: WWE-2IHQI2020
WEBSITE: www.G oiHome.com
SUPPORT: 877 543 3540
2023© Lifeworks Technology Group LLC. New York, NY 10018
iHome is a registered trademark of SDI Technologies Inc., used under
license. USB Type-C™ and USB-C™ are trademarks of USB Implementers
Forum. Actual products may dier slightly from Images. All other brands
are registered trademarks of their respective companies. Made in China