SOAR SR-WC3N1 3 In 1 Wireless Charging Frame User Manual
- June 12, 2024
- Soar
Table of Contents
3 in 1 Wireless Charging Fram
USER MANUAL
Thank you for choosing the SOAR Wireless Charging Frame. High speed charging
personalized for your home or office. Please familiarize yourself with the
wireless charging functionality of your smartphone or device before use.
Contents : Wireless Charging Frame, USB-C Charging Cable, User Manual
Product Variates Can Include : Magnet Dry Erase Insert, Cork Board Insert, Dry
Erase Cap Markers, Powerful Magnets, Push Pins
PRODUCT KEY
- Frame Display Area
- Wireless Charging Area
- Smart Phone Charging Ledge
- USB-C Power Port
- LED Indicator Light
- Collapsible Kick Stand
- Frame / Insert Access Latch
CHARGING
Use the provided USB-C charging cable or an equivalent USB-C cable. Plug the
USB-C end into the USB-C port (4) on the side of your charging frame. Plug the
USB end into a suitable 5V port on your computer, wall charger, or power
strip. The LED indicator light (5) will be red to signify standby mode, ready
for charging.
To charge simply place your wireless charging compatible smart phone or device
on the charging shelf (3) on the front of your frame. The device will
automatically start charging and the LED indicator light (5) will change to
blue. When fully charged, it will maintain a full charge in your device and
return to standby preventing overcharge. Preserving your products battery
life.
FUNCTION
To stand your frame pull the kick stand (6) on the back out word. Push the
kick stand (6) back in to flatten the product for travel.
To change the photo or insert board slide the access latch (7) on the back
left and pull out word. This provides access to the photos or board inside. To
replace, place it back in the slot and slide right until it clicks into place.
The wireless charging frame fits standard photographs that are 3.5 in x 5 in.
Stack your favorites inside and change them up.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
SPECIFICATIONS
Input : 5V/2A 9V/2A Output: 5V/1A 9VIIA 9V/1.67A
Wireless Charger Output : ISW/10W/7.5W/5W Working Distance : <6MM
USB-C Charging Cable : 3.28FT
WARNING
This device is not a toy and should be kept away from children. The product must not be dropped or subjected to impact. Do not use the device in humid environments or in extremely hot / cold temperatures. Do not use chemicals or abrasive detergents to clean the product. Please return for repairs if the product is defective. The warranty is invalid if the product has metal rust, water damage, or other natural oxidation.
WARRANTY
This product has a 1 year warranty against defects in manufacturing under
regular consumer use. For instructions about how to obtain warranty service
for your product, please contact Customer Service:
info@primebrandsgroup.com.
This device complies with part 15 of the FCC Rules. Operation s subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Prime Brands Group
Brooklyn, NY 11232
SHOPSOAR.COM
202prime Brands Group.
All rights reserved.
All trade names are registered trademarks of the respective manufactures
listed
Made in China.
Documents / Resources
| SOAR
SR-WC3N1 3 In 1 Wireless Charging
Frame
[pdf] User Manual
SR-WC3N1, 2AY4Z-SR-WC3N1, 2AY4ZSRWC3N1, SR-WC3N1 3 In 1 Wireless Charging
Frame, 3 In 1 Wireless Charging Frame, Wireless Charging Frame, Charging
Frame, Frame
---|---