teleadapt TA-8350 ChargePort M 3in1 Qi Wireless Charger Installation Guide

June 12, 2024
teleadapt

teleadapt TA-8350 ChargePort M 3in1 Qi Wireless Charger

teleadapt-TA-8350-ChargePort-M-3in1-Qi-Wireless-Charger-
PRODUCT

Product Information

The ChargePort M is a 3-in-1 Qi wireless charger designed specifically for charging Apple products such as the iPhone, Apple Watch, and AirPods. It is equipped with MagSafe technology for faster charging and can deliver up to 15W peak power to an iPhone. The charger is FCC, CE, and MFi certified for safety and quality assurance. It comes with a security bracket to secure it to a desk or nightstand and prevent removal, as well as a 1.8-meter USB cable and compatible power supply.

Part Numbers

  • TA-8350-US-A00: ChargePort M, Grey/White, 45W GaN US PSU
  • TA-8350-UK-A00: ChargePort M, Grey/White, 45W GaN UK PSU
  • TA-8350-EU-A00: ChargePort M, Grey/White, 45W GaN EU PSU

Specifications

  • Input (PSU supplied)
  • Wireless output
  • Charging frequencies
  • Operating temperature range
  • Storage temperature range
  • Operating humidity
  • Storage humidity
  • Size
  • Weight

Product Usage Instructions

Prior to installation, ensure that you have read and understood the Important Safety instructions. Make sure the installation location meets the following criteria:

  • The power outlet can be reached with the provided cord without modification.
  • ChargePort M is not suitable for installation in a bathroom.

Installation

Follow these steps to install the ChargePort M:

  1. Select the security option(s) you require.
  2. Adhesive Pad: Remove the protective sheet from one side of the adhesive pad and carefully stick it to the base of the ChargePort M. Repeat this process with the 4 rubber feet to cover the screw holes in the base. Finally, remove the protective sheet from the bottom of the adhesive pad and carefully place ChargePort M on the desk. Apply light pressure to fix it in place.

If you have any further questions or need assistance, please refer to the warranty information or contact our support team using the provided contact details.

Products Covered by this Installation Guide

ChargePort M is a 3-in-1 Qi wireless charger that is designed for charging your Apple products.
iPhone, Apple Watch, and AirPods
Designed to optimally charge Apple products, ChargePort M is an ideal charging solution for your hotel guests and is compatible with MagSafe-equipped iPhones, Apple Watch and AirPods.
MagSafe for faster charging
MagSafe technology takes wireless charging to the next level by automatically aligning the charging coils and charging an iPhone at up to 15W peak power.
Easy Install
Simply place it on a desktop or at the bedside for ultimate charging convenience. For your peace of mind, ChargePort M is fully FCC, CE, and MFi certified.
Security
A security bracket is supplied to allow the ChargePort M to be secured to the desk or nightstand if required, it also retains the power cable to prevent removal.
Power
ChargePort M is supplied with a 1.8 meter USB cable and a compatible power supply.

Part Numbers

  • TA-8350-US-A00 ChargePort M, Grey/White, 45W GaN US PSU.
  • TA-8350-UK-A00 ChargePort M, Grey/White, 45W GaN UK PSU.
  • TA-8350-EU-A00 ChargePort M, Grey/White, 45W GaN EU PSU.

Specifications

  • Input (PSU supplied): USB Type-C, 15V/3A, 12V/3A.
  • Wireless output: 15W+5W+5W max.
  • Charging frequencies: 127.7KHz/110-205KHz.
  • Operating temp. range: 0~30°C.
  • Storage temp. range: -20 ~ 40°C.
  • Operating humidity: 10% ~ 80% RH.
  • Storage humidity: 5% ~ 95% RH. .
  • Size: 19990.8128.8±0.5mm.
  • Weight: 650±10g.

Important Safety Instructions

  • Read these instructions carefully before attempting any installation. Follow all instructions and heed all warnings. These instructions should be kept for future reference.
  • This equipment is designed for indoor use only.
  • The power supply must be readily accessible at all times.
  • Ensure the power cable is uncoiled before installation.
  • Protect the power cable from being walked on or pinched.
  • The maximum distance to the receptacle (mains outlet) is determined by the length of the power cable.
  • Clean only with a dry cloth.
  • Servicing is required when the equipment has been damaged in any way. Refer all servicing to qualified service personnel.
  • Unplug this equipment during lightning storms or when unused for long periods of time.
  • The wireless chargers may get a little warm during use, this is normal.
  • Do NOT install or use this equipment near water.
  • Do NOT expose this apparatus to rain or moisture.
  • Do NOT expose to dripping or splashing. No objects filled with liquid such as vases shall be placed on the equipment.
  • Do NOT install near any heat sources such as radiators, convection heaters or other apparatus such as amplifiers that produce heat.
  • Do NOT use corrosive, abrasive or solvent based cleaners on the product.
  • Do NOT attempt to disassemble this product, it may result in short-circuit or even damage.

Other Notices
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the the operation of this device or its compliance with safety and regulatory standards.

Approval Information

FCC – 47 CFR FCC Part 15 Subpart B. CE – EN 55032:2012+AC:2013, EN 55024:2010+A1:2015. Apple MFi. WPC Qi Certified.

What is Included in the Box

  • 1 x ChargePort M
  • 1 x 45W GaN Power Supply
  • 1 x 1.8 metre cable USB-C power cable
  • 4 x adhesive rubber feet
  • 1 x security bracket
  • 1 x self adhesive pad
  • 1 x security lanyard
  • Screws for fixing security bracket and lanyard
  • 1 x Installation Guide

Dimensions

Preparation for Installation

Before starting installation make sure you have read and understood the “Important Safety instructions”. ChargePort M must be sited so the power outlet can be reached with the cord provided and without modification to the cord. Make sure the installation location is:

  • flat and even,
  • out of direct sunlight or other sources of heat, and
  • dry and away from any sources of water.
  • ChargePort M is not suitable for installation in a bathroom.

Installation
Select the security option(s) you require.
Adhesive Pad
Remove the protective sheet from one side of the adhesive pad and carefully stick it to the base of the ChargePort M as shown. Repeat the process with the 4 rubber feet to cover the screw holes in the base. Finally remove the protective sheet from the bottom of the adhesive pad and carefully place ChargePort M on the desk and apply light pressure to fix.

Security Bracket

If using the security bracket, plug the DC power connector in to the rear of the ChargePort M before fitting the bracket. Attach the bracket to the base of the ChargePort M using the screws provided, then stick the rubber feet over the screws. Ensure the DC power cord is properly retained by the bracket. The bracket can now be screwed to the furniture.
Lanyard
The lanyard is secured by attaching it to the security bracket using the screw provided.
Finishing Installation
Plug the supplied adapter into a suitable mains outlet. The indicator on the front should show solid blue.

Additional Information

  • ChargePort M has three wireless charging pads, The main iPhone charging pad can charge up to 15W, the other two charge up to 5W each.
  • Place device to be charged on one of the Qi charging pads and adjust position until the charging indicator pulses blue. If the indicator does not pulse blue then adjust the position of the device being charged until it does.
  • You can charge iPhone, Apple Watch and AirPods simultaneously.
  • Do NOT place metallic objects on the wireless charging pads.
  • In case of accidental placement of metal objects on one of the wireless charging pads, ChargePort Duo is equipped with Foreign Object detection (FOD). If metallic foreign objects are detected by ChargePort Duo then charging will be  disabled and the indicator will flash blue. Remove the foreign object.
  • ChargePort Duo also monitors temperature to check for signs of over heating. If the temperature is too high then charging will be disabled and the indicator will flash blue until the temperature returns to the normal range.

Indicator States

  • On: Powered on, standby.
  • Breathing: Charging.
  • Flashing: Foreign object detected, over temperature, wrong charger.

Warranty

Please see TeleAdapt’s “Sales Terms & Conditions” which are available at http://www.teleadapt.com/teleadapt/sales-terms-conditions.html.

Contact

Contact Details

  • Americas
  • TeleAdapt Inc
  • 1315 Greg Street
  • Suite 110
  • Sparks
  • NV 89431
  • USA
  • Tel: +1 775 355 8585
  • Asia
  • TeleAdapt (Hong Kong) Limited
  • Hong Kong
  • Kowloon
  • Tel: +852 2155 1383
  • Email: hk@teleadapt.com.
  • Visit our website at: www.teleadapt.com.
  • TA-8350-xx-A00, ChargePort M Installation Guide.
  • Revision 29, 16 May 2023.
  • All rights reserved. All copyrights and trademarks are acknowledged.
  • Specifications are subject to change without notice.

FCC

FCC Warning
This device complies with Part 18 and Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:

  • (a)Max. Electric Field Emissions: 6.12V/m Max. Magnetic Field Emissions: 0.54V/m
  • (b) The maintenance of the system is the responsibility of the manufacturer.
  • (c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible.

RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This page left intentionally blank. This page left intentionally blank.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals