nordlux ANE 29 IP54 SCENE SELECT Ceiling Light Instruction Manual
- June 12, 2024
- nordlux
Table of Contents
nordlux ANE 29 IP54 SCENE SELECT Ceiling Light
Product Information
The product is a light fixture with the following features:
- IP54 rated for protection against dust and splashing water
- Scene select functionality for different lighting modes
- Memorizing previous mode feature
- Reset function for returning to default settings
- Variable color temperature options (3000K and 4000K)
- Variable brightness levels (20% and 100%)
- Compatible with a power supply of 220-240V AC, 50Hz
- Dimensions: 28mm x 8mm
- Comes with a cable length of 225cm
- Available in different IP ratings: IP68, IP65, IP44-65, IP20
Product Usage Instructions
Important note: If you want to install this light fixture in your bathroom, make sure to consult your local electrician due to potential extra installation/safety requirements in some countries (e.g., France).
To use the light fixture, follow these steps:
- Before installation, ensure that the power supply is turned off.
- Select the desired IP rating based on your installation requirements.
- Connect the light fixture to the power supply using the provided cable.
- Turn on the power supply.
- To select a lighting scene, use the scene select feature. The available scenes will depend on the specific model of the product.
- To adjust the color temperature, use the color temperature control options. Choose between 3000K and 4000K.
- To adjust the brightness level, use the brightness control options. Choose between 20% and 100% brightness.
- If you want to return the light fixture to its default settings, use the reset function.
- For proper disposal of the product, contact your local waste management service or the store where you purchased the product.
- For additional information on correct disposal, refer to the user manual or contact local authorities responsible for waste management.
Assembly Instructions
-
If you want to install this light fixture in your bathroom and knowing some countries have extra local installation/safety requirements, always contact your local electrician before installation (eg. France) !
- IP5X: Dust is prevented from entering the lamp in amounts that can cause damage to the function/safety of the lamp.
- IPX4: Raindrops falling from any angle will not affect the function/safety of the lamp.
Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
For indoor use only.
Nordlux A/S · Østre Havnegade 34 · DK-9000 Aalborg