Panasonic RG-T810A Whisper Thin DC Ventilating Fan Owner’s Manual
- June 12, 2024
- Panasonic
Table of Contents
Panasonic RG-T810A Whisper Thin DC Ventilating Fan
Product Information
- Model: PESMX2211003CE
- Service Manual Version: 2201 Ventilating Fan
- Market: North America
Parts Identification
Main Body Section
- Part A (2pcs)
- Part B
- Part C (3pcs)
- Part D (4pcs)
- Part E (3pcs)
Main PCB Section
- Part F (2pcs)
Main Labels
- Name Plate
- Warning Label
- Caution Label 1
- UL Mark
Packing Section
- Louver Case Assy
- Poly Cover
- Installation Instructions (ES)
- Accessory A
- Right Pad
- Left Pad
- Packing Case Assy
Product Usage Instructions
To use the ventilating fan, follow these steps:
- Identify the parts of the main body section as labeled in the user manual.
- Assemble the main body section parts according to the provided instructions.
- Install the main PCB section parts as labeled in the user manual.
- Attach the main labels to the appropriate locations on the fan.
- Refer to the wiring diagram in the user manual for proper electrical connections.
- Ensure that the circuit board assembly inside the fan’s can/housing is not drilled. Refer to the installation instructions for more details.
- Refer to the parts list in the user manual for any additional components or accessories required.
Please note that these are general usage instructions. For detailed usage instructions and safety precautions, refer to the complete user manual provided with the product.
WARNING
This service information is designed for experienced repair technicians
only and is not designed for use by the general public. It does not contain
warnings or cautions to advise non-technical individuals of potential dangers
in attempting to service a product. Products powered by electricity should be
serviced or repaired only by experienced professional technicians. Any attempt
to service or repair the product or products dealt with in this service
information by anyone else could result in serious injury or death.
IMPORTANT SAFETY NOTICE
There are special components used in this equipment that are important for safety. These parts are marked in the Schematic Diagrams, Exploded Views, and Replacement Parts List. It is essential that these critical parts should be replaced with the manufacturer’s specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of the manufacturer. We suggest handling such parts after the static electricity prevention. It is forbidden to touch the PCB parts with bare hands during the repair process.
Specifications
Model No.
| Air direction| Voltage
M
| Frequency (Hz)| Duct diameter (inches)| Air volume (CFM)| Noise (sones)| Speed (rpm)| Power
(W)
| Weight lb (kg)
---|---|---|---|---|---|---|---|---|---
RG-T810A
| ****
Exhaust
| ****
120
| ****
60
| ****
4
| 80| 0.5| 881| 8.9| ****
7.9 (3.6)
100| 1.1| 993| 13.2
HVI Certified performance based on HVI Procedures 915, 916, and 920, at 0. 1″ WG.
Parts Identification
Main Body Section
Main PCB Section
Main Labels Packing Section
Wiring Diagram
Parts List
Main Body Section
| No. | Part No. | Part Name | Q´ty | Remark |
|---|---|---|---|---|
| 1 | FFV5710025S | Suspension Bracket | 1 | |
| 2 | FFV1600159S | Frame Assy | 1 | |
| 3 | FFV0000166S | Adapter Assy | 1 | **** |
| 4 | FFV0900052S | Connector Plate | 1 | |
| 5 | FFV3450010S | Ground Wire | 1 | **** |
| 6 | FFV0900072S | ConnectorAssy(V) | 1 | **** |
| 7 | FFV2800020S | Junction Cover | 1 | |
| 8 | FFV10VS1M2 | Motor Assy | 1 | **** |
| 9 | FFV510VS19 | Motor Support | 1 | |
| 10 | FFV510VS18 | Blade | 1 | |
| 11 | FFV0810RS2 | Main PCB Assy | 1 | **** |
| 12 | FFV7020021S | Nut | 1 | |
| 13 | FFV510VS10 | Casing | 1 | |
| 14 | FFV1315A810 | Grill Assembly | 1 | |
| A | FFV7000108S | Truss Tap Screw | 5 | **** |
| B | FFV7000227S | Earth Screw Assy | 1 | |
| C | FFVXTT48GFJ | Bind Tap Screw | 3 | |
| D | FFVXTT412GFJ | Bind Tap Screw | 6 | |
| E | FFV7000202S | Bind Tap Screw | 3 |
Main PCB Section
| No. | Part No. | Part Name | Q´ty | Remark |
|---|---|---|---|---|
| 15 | FFVT810L199 | Main PCB Box | 1 | |
| 16 | FFV510VS1992 | Main PCB Cover | 1 | |
| 17 | FFV510VS112 | Motor Lead Wire | 1 | **** |
| F | FFVXTN268GFJ | Screw | 1 |
Main Labels
| No. | Part No. | Part Name | Q´ty | Remark |
|---|---|---|---|---|
| 18 | FFVT810A105 | Name Plate | 1 | |
| 19 | FFV6730110S | Warning Label | 1 | |
| 20 | FFV0810011S | Caution Label 1 | 1 | |
| 21 | FFV2260003S | UL Mark | 1 |
Packing Section
| No. | Part No. | Part Name | Q´ty | Remark |
|---|---|---|---|---|
| 22 | FFV4710381S | Louver Case Assy | 1 | |
| 23 | FFV4650016S | Poly Cover | 1 | |
| 24 | FFVT810A14 | Installation Instructions (ES) | 1 | |
| 25 | FFV0010231S | Accessory A | 1 | |
| 26 | FFV4710369S | Right Pad | 1 | |
| 27 | FFV4710370S | Left Pad | 1 | |
| 28 | FFVT810A140 | Packing Case Assy | 1 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>