Shenzhenshi Gybb Technology GBD01A 3 In 1 Wireless Charger Stand User Manual
- June 6, 2024
- Shenzhenshi Gybb Technology
Table of Contents
Shenzhenshi Gybb Technology
GBD01A 3 In 1 Wireless Charger Stand
User Manual
Applicable equipment
-
Smartphone.
IPHONE: IPHONE 12 Series, 11 Series, XS Series, X Series, 8 Series SAMSUNG: GALAXY Note Series, GALAXY S Series MI: MI 10, M19 HUAWEI: HUAWEI Mate Series, HUAWEI P Series Includes other devices with built-in wireless charging receivers Note: All of the above equipment must meet QI standards -
Smartwatch.
IPHONE: (watch S1, S2, S3, S4, S5 -
Headphones.
IPHONE: AirPods Generation 1, Generation 2, Airpods Pro;
MI: AirDots Youth Edition, RedMi AirDots;
Includes other Bluetooth Earbuds cases that support wireless charging
Product Specifications
Input: 9V/2A,9V/2.22A,12V/1.66A | Input Interface: Type-C interface |
---|---|
Mobile phone output: 15W/10W/7.5W/5W | Transmission distance: 6mm Max |
Headphone output: 2.5W
(compatible with cell phone 5W)| Product Size: 12048120mm
Watch output: 2.5W| Charging efficiency: 73%-80%
Accessory List
Wireless Charging x1 | Type-CFast charging cable xl | User Manuals xl |
---|
Cautions
- Please keep the charger away from water or other liquids
- If you need to clean the charger, please make sure it is not connected to the power supply
- Use the ambient temperature to maintain 0-45 degrees Celsius
Attention!
-
The mag-safe charger is specially designed for iPhone 12 series, perfect for iPhone 12, iPhone 12 Pro, iPhone 12 Mini, iPhone 12 Pro Max.
-
Please make sure you are using MagSafe Cases. It can’t compatible with non-MagSafe cases. non-MagSafe cases make the magnetic force is weak and can’t charge.
Compatible with iphone 12 Series Magsafe Cases
-
Any problems, please contact us by Amazon or Email, we will send you the replacement or full refund.
FCC Warning Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cmbetween the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Product Description
The three-in-one magnetic desktop charger is an exquisite charging stand that can charge three devices at the same time with only one data cable. Just charge your mobile phone, Apple Watch, and wireless earphone box on the desktop to charge. The use of the desktop charger makes your desktop tidier and life more convenient.
The design of this product is not only very space-saving but also can help you integrate smart devices well, especially for Apple users. In addition, the atmosphere light is trendy and dazzling, with indicator lights that show the status of the charging phone and earphones! If you want to turn off or turn on the light, just touch the sensor key.
Product Appearance
Steps to use
- please connect the product to the power supply.
- put your cell phone on it to charge.
- Take out your Apple watch (the strap rolled to the narrowest is better), put it on, and suck it to charge.
- put your headset box face up to charge.
Charging indicator
- Charging status – always on
- Equipment take away – lights out
- Foreign matter-f lash
Charging schematic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>