IPORT 72307 CONNECT iPad Charging Dock Owner’s Manual
- June 12, 2024
- IPORT
Table of Contents
CONNECT
DOCK
72307 CONNECT iPad Charging Dock
IPORT CONNECT DOCK Install Manual
Thank you for purchasing the all new IPORT CONNECT Platform. We hope you enjoy this revolutionary new system and if at any time you need more assistance please contact IPORT Tech Support via Online chart or through our help desk.
- IPORT Team
Whats in box:
1 – IPORT CONNECT DOCK
1 – IPORT POWER SUPPLY
1 – Info Card
POWER SPECS
INPUT:| 110-240V | AC 50/60 Hz
---|---
CRADLE OUTPUT 1:| 5V 3A, PD 9V 3A
CRADLE OUTPUT 2:| 5V 1.5A
| FCC PART 15B CLASS B
AS/NZS 60950
AS/NZS CISPR22
EN 55032:2015+A11:2020
BS EN 55035:2017+A11:2020
---|---
- Remove DOCK and Power Supply from the box and place on a table.
- Insert the barrel connecto into the bottom side of the dock.
- Rotate the wire retention clip towards the front of the dock. Run the wire around the retention post and rotate the clip back into place.
- Place the CONNECT Dock in the desired location. Plug in the power adapter into AC power and place IPORT CONNECT Case onto a Dock to initiate charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>