hama 00201678 FC10 Motion Car Mobile Phone Charger Instruction Manual

00201678
Wireless Car Charger
“FC10C Motion”
Operating Instructions

00201678 FC10 Motion Car Mobile Phone Charger

Controls and displays

1. USB-C input
2. Status LEDs
3. Touch button
4. Adjustable height setting
5. Grating attachment
6. Telescopic suction cup holder

LED function indicator

off

1. The display at the end of charging may differ on some devices, depending on the manufacturer.
   Thank you for choosing a Hama product.
   Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
   Explanation of warning symbols and notes
   Risk of electric shock
   This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
   Warning
   This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
   Note
   This symbol is used to indicate additional information or important notes.

 Package contents

• 1x “FC10C Motion” wireless car charger for smartphones
• 1x telescopic suction cup holder
• 1x USB-C cable
• 1x car charger
• These operating instructions

Safety instructions

• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in areas in which electronic products are not permitted.
• Ensure that the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Do not continue to operate the product if it is visibly damaged.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic conditions.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not use the product in a damp environment and avoid splashing water.
• Do not bend or crush the cable.
• Never apply force when using the product or during installation.
• When using this product, observe the applicable local traffic laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.
• Ensure that the product is securely mounted before every journey.
• Do not allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.

Warning
Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted
Warning
Ensure that there are no metal parts (e.g. metal plate for magnetic holders) on the back of your device.
Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.
Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
•  Do not use the product if the charging cable, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Start-up and operation

Note

• To be able to charge your device via the wireless charger, it must be compatible with induction charging technology. Please refer to the operating instructions of your device for more information.
•  Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the back of your device may interfere with or even prevent the charging process.

Note – 12 V, 24 V vehicle electrical systems
The charger is suitable for 12 V and 24 V vehicle electrical systems.

• Fasten the wireless car charger over the enclosed grating holder (5) on the grating or fasten it to your vehicle’s windscreen with the help of the telescopic suction cup holder. Please ensure that your view is not obstructed.
• Connect the enclosed USB-C cable to the USB-C input (1) on the wireless charger and the enclosed car USB charger.
• When the power supply is active and after a brief self-test, the two status LEDs (2) light up green.
• The charger checks whether there is a smartphone in the holder. If there is no smartphone in the holder, the charger automatically opens the retaining clips.

Warning

• Only use suitable charging devices or USB ports to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Place your device with its rear on the wireless charger (B). The retaining clips close automatically and the smartphone is fixed in place.
• The charging process begins as soon as an effective induction field has been established. The colour of the two status LEDs (2) changes to blue. The current charge status is displayed on your device.
• If no induction connection can be established, change the position of your device if necessary (B). The lower retaining clip can be pulled out or pushed in a little bit for this. Fixing is ensured by an integrated locking mechanism.
• The charging process ends automatically once your device’s battery is fully charged. The status LEDs (2) go out.
• Remove your device from the wireless charger or disconnect the wireless charger from the power supply.
• To remove the smartphone, touch one of the two touch buttons on the side of the charger to open the retaining clips.
• Thanks to the integrated power store, the charger can continue to be opened and closed a few times after being disconnected from the power supply.
• If metallic or magnetic objects are on the charger, this is indicated by the LEDs flashing green and blue alternately. Next, the charger switches itself off.

Note – car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off. You should therefore disconnect the product from the line connection when not in use to protect your car battery from being drained.

Care and maintenance

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners. Ensure that no water is able to enter the product.
Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

Technical data

Wireless car charger

Wireless car charger

Input| 5 V max. 2.0 A
9 V max. 1.67 A
Output (under optimised conditions)| max. 10 W
Dimensions| 72.5 x 116.5 x 55 cm
Car adapter:
Vehicle electrical system voltage| 12 V, 24 V
Output voltage / current max.| 3.6 – 6V 3 A
6 – 9V 2 A
9 – 12V ****1.5 A
Output power total| 18 W max.

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00201678] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com->00201678->Downloads.

Hama GmbH & Co KG
86652 Monheim / Germany
Service & Support
****www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
00201678/02.23

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>