hama PG-220 Wall Clock Instruction Manual
- June 12, 2024
- Hama
Table of Contents
hama PG-220 Wall Clock
**
Product
Information**
- Product Name: Wall Clock Wanduhr
- Brand: Hama GmbH & Co KG
- Model: PG-220
- Power Supply: 1.5V AA battery
- Manufacturer: Hama GmbH & Co KG
- Country of Origin: Germany
- Website: www.hama.com
- Service & Support: +49 9091 502-0
Product Usage Instructions
Package Contents: The package should include the wall clock and the user
manual. 2. Safety
Notes: Before using the wall clock, read the safety notes in the user manual
to ensure proper usage and prevent accidents. 3.
Getting Started
Inserting the battery
- Remove the battery that was already inserted into the clock.
- Remove any protective film if necessary.
- Remove the contact interrupter.
- Insert a new AA battery with the correct polarity
- The clock is now ready for operation. 3.2
Replacing the battery
- Remove and dispose of any used batteries.
- Insert a new AA battery into the battery compartment.
- Ensure that the polarity of the battery corresponds to the symbols in the compartment.
Installation:
- Mount the wall clock on a wall using the opening on the back.
Operation: Follow the user manual for instructions on setting the clock and adjusting its functions.
Care and Maintenance:
- Clean the product with a slightly damp, lint-free cloth.
- Do not use aggressive cleaning agents.
- Ensure that water does not get into the product.
Warranty Disclaimer:
The manufacturer assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product, or
failure to observe the operating instructions and safety notes.
Technical Data:
- Power supply: 1.5V AA battery – Model: PG-220
Note : The instructions provided above are for general guidance. For detailed instructions and specific information, refer to the user manual that comes with the product.
Operating instruction
Package Contents
- PG-220 wall clock
- 1 (AA) battery
- These operating instructions
Safety Notes
- The product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not operate the product outside the power limits given in the specifications.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Keep this product, as all electrical products, out of the reach of children! Use the item only in moderate climatic conditions.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning – Batteries
- Do not mount the product above locations where persons might linger.
- When inserting batteries, note the correct polarity (+ and -markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
- Only use batteries (or rechargeable batteries) that match the specified type.
- Before you insert the batteries, clean the battery contacts and the polar contacts.
- Do not allow children to change batteries without supervision. Do not mix old and new batteries or batteries of a different type or make.
- Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
- Do not short-circuit batteries.
- Do not charge batteries.
- Do not throw batteries in a fire.
- Keep batteries out of the reach of children.
- Never open, damage or swallow batteries or allow them to enter the environment.
- They can contain toxic, environmentally harmful heavy metals.
- Immediately remove and dispose of dead batteries from the product.
- Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).
Getting Started
Inserting the battery
Remove the battery that was already inserted into the clock, remove the
protective film if necessary as well as the contact interrupter and the re-
insert the battery with the correct polarity. The clock is ready for
operation.
Replacing the battery
Remove and dispose of any used batteries. Insert the new battery (AA). Ensure
that the polarity of the battery corresponds to the symbols in the battery
compartment.
Installation
You can mount the wall clock on a wall using the opening on the back.
Warning – Mounting Note:
- Before mounting the clock, ensure that the chosen wall is suitable for the weight to be mounted, and make sure that there are no electrical wires, water, gas or other lines at the installation site on the wall.
- Purchase special fastening materials from specialised dealers.
Operation
- Once the battery has been inserted properly, the clock will automatically start running.
- Use the setting wheel on the back of the clock to set the time.
Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Technical Data
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted, and subject to technical changes. Our general terms of
delivery and payment are applied.